[Wed Oct 26 12:37:49 2011] Detection parameters:
  Position = (963.1, 237.8) = 16 33 56.35 56 36 54.8
  Extent = 0.6" x 0.5", rotation angle = 148 degrees
  Source counts = 13.6 +/- 3.7
  Background counts = 0.4
  Rate = 0.0005 +/- 0.0001

[Wed Oct 26 12:37:49 2011] Off-axis axis estimate = 4.08'
[Wed Oct 26 13:20:01 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 13:20:01 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Wed Oct 26 13:20:01 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801
[Wed Oct 26 13:20:01 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.85"
[Wed Oct 26 13:30:00 2011] fullrun_ccd3_acisf12309_pi14-548_cl_pass0_src5.ximg exists
[Wed Oct 26 13:30:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12309_pi14-548_cl_pass0_src5.csv
[Wed Oct 26 13:30:00 2011] fullrun_ccd3_acisf12309_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Oct 26 13:30:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12309_pi14-548_cl_pass0_src5.csv
[Wed Oct 26 13:30:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12309_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12309_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 13:30:00 2011] fullrun_ccd3_acisf12309_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct 26 13:30:00 2011] fullrun_ccd3_acisf12309_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct 26 13:30:00 2011] Fit fullrun_ccd3_acisf12309_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Oct 26 13:47:09 2011] Spatial fit model total counts = 16.405900, observed total counts = 17.000000
[Wed Oct 26 13:47:09 2011] Offset between fit and detection position for source 13 = 0.706639 pixels
[Wed Oct 26 13:47:09 2011] 16.661920 total counts/ 3.842420 bgd. counts: snr = 6.539863
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.706639 pixels
  Position = (963.5, 238.3) = 16 33 56.35 56 36 54.8
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 12.8 +/- 4.1
  Background counts = 3.8
  Rate = 0.0004 +/- 0.0001
[Wed Oct 26 13:47:09 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 13:47:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 13:47:09 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 13:47:09 2011] Source does appear to be extended
[Wed Oct 26 13:47:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 14:24:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 14:24:35 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Wed Oct 26 14:24:35 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.684
[Wed Oct 26 14:24:35 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.65"
[Wed Oct 26 14:33:52 2011] fullrun_ccd3_acisf12309_pi14-548_cl_pass1_src5.ximg exists
[Wed Oct 26 14:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12309_pi14-548_cl_pass1_src5.csv
[Wed Oct 26 14:33:52 2011] fullrun_ccd3_acisf12309_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Oct 26 14:33:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12309_pi14-548_cl_pass1_src5.csv
[Wed Oct 26 14:33:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12309_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12309_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 14:33:52 2011] fullrun_ccd3_acisf12309_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct 26 14:33:52 2011] fullrun_ccd3_acisf12309_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct 26 14:33:52 2011] Fit fullrun_ccd3_acisf12309_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Oct 26 15:00:43 2011] Spatial fit model total counts = 16.975900, observed total counts = 17.000000
[Wed Oct 26 15:00:43 2011] Offset between fit and detection position for source 13 = 0.051321 pixels
[Wed Oct 26 15:00:43 2011] 16.660170 total counts/ 3.390870 bgd. counts: snr = 7.205970
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.051321 pixels
  Position = (963.5, 238.4) = 16 33 56.35 56 36 54.9
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 13.3 +/- 4.1
  Background counts = 3.4
  Rate = 0.0005 +/- 0.0001
[Wed Oct 26 15:00:43 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:00:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:00:43 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:00:43 2011] Source does appear to be extended
[Wed Oct 26 15:00:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:16:10 2011] Writing source region out to fullrun_ccd3_acisf12309_pi14-548_pass1_cl_src13_src.reg
[Wed Oct 26 15:16:10 2011] Extracting stamp from image fullrun_ccd3_acisf12309_pi14-548_cl_sm2.00.img.gz, (935, 210) - (992, 267)
[Wed Oct 26 15:16:10 2011] Writing fullrun_ccd3_acisf12309_pi14-548_pass1_cl_src13.gif
[Wed Oct 26 15:17:57 2011] Size of ../../acisf12309/products/events/fullrun_ccd3_acisf12309_pi14-548_pass1_cl_src13_src.evt.gz[events] = 14 counts
[Wed Oct 26 15:17:57 2011] Mean chipx,y = (1006.50, 719.07)
[Wed Oct 26 15:17:57 2011] Mean tdetx,y = (4412.93, 4067.50)
[Wed Oct 26 15:17:57 2011] chipx,y range = (1000.00-1014.00, 706.00-740.00)
[Wed Oct 26 15:17:57 2011] Size of ../../acisf12309/products/events/fullrun_ccd3_acisf12309_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 4 counts
[Wed Oct 26 15:17:58 2011] Not generating rmf since there are only 13 counts
[Wed Oct 26 15:17:58 2011] arf not found, will run specextract
[Wed Oct 26 15:18:23 2011] ../../acisf12309/products/spectra/fullrun_ccd3_acisf12309_pi14-548_pass1_cl_src13.warf not found
[Wed Oct 26 15:18:23 2011] ../../acisf12309/products/spectra/fullrun_ccd3_acisf12309_pi14-548_pass1_cl_src13.wrmf not found
[Wed Oct 26 15:18:23 2011] Removal of ../../acisf12309/products/spectra/fullrun_ccd3_acisf12309_pi14-548_pass1_cl_src13.soff failed
[Wed Oct 26 15:23:05 2011] Spectrum 13 has only 13 counts, deleting rmf
[Wed Oct 26 15:23:05 2011] 132.933
[Wed Oct 26 15:23:41 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:23:41 2011] Error reading totcts from fullrun_ccd3_acisf12309_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Oct 26 15:23:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:23:41 2011] Using photon index=1.80, rate=0.000463, arf fullrun_ccd3_acisf12309_pi14-548_pass1_cl_src13.arf
[Wed Oct 26 15:23:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:23:41 2011] Updating source flux to 8.2e-15
[Wed Oct 26 15:23:48 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 15:23:49 2011] acisf12309/analysis//spectral/fullrun_ccd3_acisf12309_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete