[Wed Oct 26 12:37:12 2011] Detection parameters:
  Position = (1005.8, 721.7) = 16 34 32.54 56 34 13.1
  Extent = 0.6" x 0.5", rotation angle = 79 degrees
  Source counts = 11.5 +/- 3.5
  Background counts = 0.5
  Rate = 0.0004 +/- 0.0001

[Wed Oct 26 12:37:13 2011] Off-axis axis estimate = 2.89'
[Wed Oct 26 13:06:52 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 13:06:52 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Wed Oct 26 13:06:52 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.840
[Wed Oct 26 13:06:52 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.56"
[Wed Oct 26 13:20:01 2011] fullrun_ccd2_acisf12309_pi14-548_cl_pass0_src9.ximg exists
[Wed Oct 26 13:20:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12309_pi14-548_cl_pass0_src9.csv
[Wed Oct 26 13:20:01 2011] fullrun_ccd2_acisf12309_pi14-548_cl_pass0_src9_1.ximg exists
[Wed Oct 26 13:20:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12309_pi14-548_cl_pass0_src9.csv
[Wed Oct 26 13:20:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12309_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12309_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 13:20:01 2011] fullrun_ccd2_acisf12309_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed Oct 26 13:20:01 2011] fullrun_ccd2_acisf12309_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Oct 26 13:20:01 2011] Fit fullrun_ccd2_acisf12309_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Oct 26 13:47:08 2011] Spatial fit model total counts = 13.258500, observed total counts = 13.000000
[Wed Oct 26 13:47:08 2011] Offset between fit and detection position for source 2 = 0.796932 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.796932 pixels
  Position = (1006.4, 722.3) = 16 34 32.54 56 34 13.1
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 12.9 +/- 3.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Wed Oct 26 13:47:08 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 13:47:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 13:47:08 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 13:47:08 2011] Source does appear to be extended
[Wed Oct 26 13:47:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 14:13:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 14:13:40 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Wed Oct 26 14:13:40 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.117
[Wed Oct 26 14:13:40 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.68"
[Wed Oct 26 14:24:35 2011] fullrun_ccd2_acisf12309_pi14-548_cl_pass1_src9.ximg exists
[Wed Oct 26 14:24:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12309_pi14-548_cl_pass1_src9.csv
[Wed Oct 26 14:24:35 2011] fullrun_ccd2_acisf12309_pi14-548_cl_pass1_src9_1.ximg exists
[Wed Oct 26 14:24:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12309_pi14-548_cl_pass1_src9.csv
[Wed Oct 26 14:24:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12309_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12309_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 14:24:35 2011] fullrun_ccd2_acisf12309_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Wed Oct 26 14:24:35 2011] fullrun_ccd2_acisf12309_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Oct 26 14:24:35 2011] Fit fullrun_ccd2_acisf12309_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Oct 26 15:00:42 2011] Spatial fit model total counts = 12.731400, observed total counts = 13.000000
[Wed Oct 26 15:00:42 2011] Offset between fit and detection position for source 2 = 0.107486 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.107486 pixels
  Position = (1006.3, 722.2) = 16 34 32.54 56 34 13.1
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 12.4 +/- 3.5
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Wed Oct 26 15:00:42 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:00:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:00:42 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:00:42 2011] Source does appear to be extended
[Wed Oct 26 15:00:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:06:57 2011] Writing source region out to fullrun_ccd2_acisf12309_pi14-548_pass1_cl_src2_src.reg
[Wed Oct 26 15:06:57 2011] Extracting stamp from image fullrun_ccd2_acisf12309_pi14-548_cl_sm2.00.img.gz, (974, 690) - (1038, 754)
[Wed Oct 26 15:06:57 2011] Writing fullrun_ccd2_acisf12309_pi14-548_pass1_cl_src2.gif
[Wed Oct 26 15:12:02 2011] Size of ../../acisf12309/products/events/fullrun_ccd2_acisf12309_pi14-548_pass1_cl_src2_src.evt.gz[events] = 13 counts
[Wed Oct 26 15:12:02 2011] Mean chipx,y = (284.08, 714.69)
[Wed Oct 26 15:12:02 2011] Mean tdetx,y = (3775.69, 3801.92)
[Wed Oct 26 15:12:02 2011] chipx,y range = (274.00-299.00, 696.00-729.00)
[Wed Oct 26 15:12:02 2011] Size of ../../acisf12309/products/events/fullrun_ccd2_acisf12309_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 9 counts
[Wed Oct 26 15:12:04 2011] Not generating rmf since there are only 12 counts
[Wed Oct 26 15:12:04 2011] arf not found, will run specextract
[Wed Oct 26 15:12:32 2011] ../../acisf12309/products/spectra/fullrun_ccd2_acisf12309_pi14-548_pass1_cl_src2.warf not found
[Wed Oct 26 15:12:32 2011] ../../acisf12309/products/spectra/fullrun_ccd2_acisf12309_pi14-548_pass1_cl_src2.wrmf not found
[Wed Oct 26 15:12:32 2011] Removal of ../../acisf12309/products/spectra/fullrun_ccd2_acisf12309_pi14-548_pass1_cl_src2.soff failed
[Wed Oct 26 15:16:09 2011] Spectrum 2 has only 12 counts, deleting rmf
[Wed Oct 26 15:16:09 2011] 195.464
[Wed Oct 26 15:23:40 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:23:40 2011] Error reading totcts from fullrun_ccd2_acisf12309_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct 26 15:23:40 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:23:40 2011] Using photon index=1.80, rate=0.000434, arf fullrun_ccd2_acisf12309_pi14-548_pass1_cl_src2.arf
[Wed Oct 26 15:23:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:23:40 2011] Updating source flux to 5.2e-15
[Wed Oct 26 15:23:47 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 15:23:48 2011] acisf12309/analysis//spectral/fullrun_ccd2_acisf12309_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete