[Wed Oct 26 12:36:39 2011] Detection parameters:
  Position = (286.0, 821.2) = 16 33 48.38 56 36 28.8
  Extent = 1.0" x 0.6", rotation angle = 147 degrees
  Source counts = 135.0 +/- 11.8
  Background counts = 4.0
  Rate = 0.005 +/- 0.0004

[Wed Oct 26 12:36:39 2011] Off-axis axis estimate = 5.20'
[Wed Oct 26 12:53:37 2011] Using EEF radius (= 1.26 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 12:53:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 12:53:37 2011] Initial guess for spatial extent in simple fitting = 1.26"
[Wed Oct 26 12:53:37 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.960
[Wed Oct 26 12:53:37 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.26"
[Wed Oct 26 13:06:52 2011] fullrun_ccd1_acisf12309_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct 26 13:06:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12309_pi14-548_cl_pass0_src2.csv
[Wed Oct 26 13:06:52 2011] fullrun_ccd1_acisf12309_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct 26 13:06:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12309_pi14-548_cl_pass0_src2.csv
[Wed Oct 26 13:06:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12309_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12309_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 13:06:52 2011] fullrun_ccd1_acisf12309_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct 26 13:06:52 2011] fullrun_ccd1_acisf12309_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct 26 13:06:52 2011] Fit fullrun_ccd1_acisf12309_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct 26 13:47:06 2011] Spatial fit model total counts = 134.193000, observed total counts = 138.000000
[Wed Oct 26 13:47:06 2011] Offset between fit and detection position for source 6 = 0.619537 pixels
[Wed Oct 26 13:47:06 2011] 134.429340 total counts/ 3.248340 bgd. counts: snr = 72.784717
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.619537 pixels
  Position = (286.4, 821.7) = 16 33 48.38 56 36 28.8
  Extent = 1.1 (1.0-1.2)", rotation angle = 0
  Source counts = 131.2 +/- 11.6
  Background counts = 3.2
  Rate = 0.005 +/- 0.0004
[Wed Oct 26 13:47:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 13:47:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 13:47:06 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 13:47:06 2011] Source does appear to be extended
[Wed Oct 26 13:47:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 13:59:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 13:59:54 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Wed Oct 26 13:59:54 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.839
[Wed Oct 26 13:59:54 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.10"
[Wed Oct 26 14:13:40 2011] fullrun_ccd1_acisf12309_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct 26 14:13:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12309_pi14-548_cl_pass1_src2.csv
[Wed Oct 26 14:13:40 2011] fullrun_ccd1_acisf12309_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct 26 14:13:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12309_pi14-548_cl_pass1_src2.csv
[Wed Oct 26 14:13:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12309_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12309_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 14:13:40 2011] fullrun_ccd1_acisf12309_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct 26 14:13:40 2011] fullrun_ccd1_acisf12309_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct 26 14:13:40 2011] Fit fullrun_ccd1_acisf12309_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct 26 15:00:40 2011] Spatial fit model total counts = 134.776000, observed total counts = 138.000000
[Wed Oct 26 15:00:40 2011] Offset between fit and detection position for source 6 = 0.035581 pixels
[Wed Oct 26 15:00:40 2011] 134.659340 total counts/ 1.333340 bgd. counts: snr = 115.463414
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.035581 pixels
  Position = (286.4, 821.7) = 16 33 48.38 56 36 28.8
  Extent = 1.1 (1.0-1.2)", rotation angle = 0
  Source counts = 133.3 +/- 11.6
  Background counts = 1.3
  Rate = 0.005 +/- 0.0004
[Wed Oct 26 15:00:40 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:00:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:00:40 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:00:40 2011] Source does appear to be extended
[Wed Oct 26 15:00:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:03:34 2011] Writing source region out to fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6_src.reg
[Wed Oct 26 15:03:34 2011] Extracting stamp from image fullrun_ccd1_acisf12309_pi14-548_cl_sm2.00.img.gz, (234, 770) - (338, 874)
[Wed Oct 26 15:03:34 2011] Writing fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6.gif
[Wed Oct 26 15:04:09 2011] Size of ../../acisf12309/products/events/fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6_src.evt.gz[events] = 139 counts
[Wed Oct 26 15:04:09 2011] Mean chipx,y = (107.99, 681.88)
[Wed Oct 26 15:04:09 2011] Mean tdetx,y = (4450.12, 4214.99)
[Wed Oct 26 15:04:09 2011] chipx,y range = (87.00-129.00, 660.00-702.00)
[Wed Oct 26 15:04:09 2011] Size of ../../acisf12309/products/events/fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 41 counts
[Wed Oct 26 15:04:10 2011] rmf not found, will run specextract
[Wed Oct 26 15:04:10 2011] arf not found, will run specextract
[Wed Oct 26 15:04:41 2011] ../../acisf12309/products/spectra/fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6.warf not found
[Wed Oct 26 15:04:41 2011] ../../acisf12309/products/spectra/fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6.wrmf not found
[Wed Oct 26 15:04:41 2011] Removal of ../../acisf12309/products/spectra/fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6.soff failed
[Wed Oct 26 15:06:57 2011] Keeping rmf generated by specextract
[Wed Oct 26 15:06:57 2011] 187.744
[Wed Oct 26 15:23:40 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:23:40 2011] Error reading totcts from fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Oct 26 15:23:40 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:23:40 2011] Using photon index=1.80, rate=0.00465, arf fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6.arf
[Wed Oct 26 15:23:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:23:40 2011] Updating source flux to 5.8e-14
[Wed Oct 26 15:23:47 2011] Reading fit data from acisf12309/analysis//spectral/fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6_pl.csv
[Wed Oct 26 15:23:47 2011] Spectral fit parameter nH value = 1.41819e+20
[Wed Oct 26 15:23:47 2011] Spectral fit parameter PhoIndex value = 2.05691
[Wed Oct 26 15:23:47 2011] Failed to get F(0.3-8.0) from acisf12309/analysis//spectral/fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 15:23:47 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:23:47 2011] Using Nh = 1.4e+20, photon index=2.06, rate=0.00465, arf fullrun_ccd1_acisf12309_pi14-548_pass1_cl_src6.arf
[Wed Oct 26 15:23:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:23:47 2011] Updating source flux to 5.6e-14