[Sat Oct 29 08:48:50 2011] Detection parameters:
  Position = (714.9, 645.8) = 16 3 18.61 43 28 53.2
  Extent = 0.8" x 0.5", rotation angle = 95 degrees
  Source counts = 17.1 +/- 4.2
  Background counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Sat Oct 29 08:48:50 2011] Off-axis axis estimate = 4.77'
[Sat Oct 29 09:44:42 2011] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 09:44:42 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Sat Oct 29 09:44:42 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Sat Oct 29 09:44:42 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.09"
[Sat Oct 29 10:02:00 2011] fullrun_ccd2_acisf12308_pi14-548_cl_pass0_src11.ximg exists
[Sat Oct 29 10:02:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12308_pi14-548_cl_pass0_src11.csv
[Sat Oct 29 10:02:00 2011] fullrun_ccd2_acisf12308_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Oct 29 10:02:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12308_pi14-548_cl_pass0_src11.csv
[Sat Oct 29 10:02:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12308_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12308_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 10:02:00 2011] fullrun_ccd2_acisf12308_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct 29 10:02:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12308_pi14-548_cl_pass0_tfrozen_src11.csv
[Sat Oct 29 10:02:00 2011] fullrun_ccd2_acisf12308_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct 29 10:02:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12308_pi14-548_cl_pass0_tfrozen_src11.csv
[Sat Oct 29 10:02:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12308_pi14-548_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12308_pi14-548_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 10:33:24 2011] Spatial fit model total counts = 15.741500, observed total counts = 19.000000
[Sat Oct 29 10:33:24 2011] Offset between fit and detection position for source 7 = 0.644596 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.644596 pixels
  Position = (715.5, 646.2) = 16 3 18.61 43 28 53.2
  Extent = 1.1" x 0.6", rotation angle = 86
  Source counts = 15.3 +/- 3.9
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Sat Oct 29 10:33:24 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 10:33:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 10:33:24 2011] Assessing source extent using major
[Sat Oct 29 10:33:24 2011] Source does appear to be extended
[Sat Oct 29 10:33:24 2011] Computing asymmetry using major and minor axis, asym = 2.01
[Sat Oct 29 10:33:24 2011] Source is asymmetric
[Sat Oct 29 11:23:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 11:23:27 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Sat Oct 29 11:23:27 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.028
[Sat Oct 29 11:23:27 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.84"
[Sat Oct 29 11:37:08 2011] fullrun_ccd2_acisf12308_pi14-548_cl_pass1_src11.ximg exists
[Sat Oct 29 11:37:08 2011] fullrun_ccd2_acisf12308_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Oct 29 11:37:08 2011] Fit fullrun_ccd2_acisf12308_pi14-548_cl_pass1_src11 appears to have run properly
[Sat Oct 29 11:37:08 2011] fullrun_ccd2_acisf12308_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct 29 11:37:08 2011] fullrun_ccd2_acisf12308_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct 29 11:37:08 2011] Fit fullrun_ccd2_acisf12308_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct 29 12:04:22 2011] Spatial fit model total counts = 19.172500, observed total counts = 19.000000
[Sat Oct 29 12:04:22 2011] Offset between fit and detection position for source 7 = 0.330475 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.330475 pixels
  Position = (715.5, 646.5) = 16 3 18.61 43 28 53.3
  Extent = 1.2" x 0.6", rotation angle = 89
  Source counts = 18.4 +/- 4.3
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat Oct 29 12:04:22 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 12:04:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 12:04:22 2011] Assessing source extent using major
[Sat Oct 29 12:04:22 2011] Source does appear to be extended
[Sat Oct 29 12:04:22 2011] Computing asymmetry using major and minor axis, asym = 2.02
[Sat Oct 29 12:04:22 2011] Source is asymmetric
[Sat Oct 29 12:13:22 2011] Writing source region out to fullrun_ccd2_acisf12308_pi14-548_pass1_cl_src7_src.reg
[Sat Oct 29 12:13:22 2011] Extracting stamp from image fullrun_ccd2_acisf12308_pi14-548_cl_sm2.00.img.gz, (662, 593) - (769, 700)
[Sat Oct 29 12:13:22 2011] Writing fullrun_ccd2_acisf12308_pi14-548_pass1_cl_src7.gif
[Sat Oct 29 12:19:29 2011] Size of ../../acisf12308/products/events/fullrun_ccd2_acisf12308_pi14-548_pass1_cl_src7_src.evt.gz[events] = 18 counts
[Sat Oct 29 12:19:29 2011] Mean chipx,y = (459.72, 459.00)
[Sat Oct 29 12:19:29 2011] Mean tdetx,y = (3520.00, 3626.28)
[Sat Oct 29 12:19:29 2011] chipx,y range = (442.00-475.00, 436.00-476.00)
[Sat Oct 29 12:19:29 2011] Size of ../../acisf12308/products/events/fullrun_ccd2_acisf12308_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 27 counts
[Sat Oct 29 12:19:30 2011] Not generating rmf since there are only 18 counts
[Sat Oct 29 12:19:30 2011] arf not found, will run specextract
[Sat Oct 29 12:19:57 2011] ../../acisf12308/products/spectra/fullrun_ccd2_acisf12308_pi14-548_pass1_cl_src7.warf not found
[Sat Oct 29 12:19:57 2011] ../../acisf12308/products/spectra/fullrun_ccd2_acisf12308_pi14-548_pass1_cl_src7.wrmf not found
[Sat Oct 29 12:19:57 2011] Removal of ../../acisf12308/products/spectra/fullrun_ccd2_acisf12308_pi14-548_pass1_cl_src7.soff failed
[Sat Oct 29 12:24:38 2011] Spectrum 7 has only 18 counts, deleting rmf
[Sat Oct 29 12:24:38 2011] 184.242
[Sat Oct 29 12:38:46 2011] Updating aperture counts using extracted products
[Sat Oct 29 12:38:46 2011] Error reading totcts from fullrun_ccd2_acisf12308_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Oct 29 12:38:46 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 12:38:46 2011] Using photon index=1.80, rate=0.000436, arf fullrun_ccd2_acisf12308_pi14-548_pass1_cl_src7.arf
[Sat Oct 29 12:38:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 12:38:46 2011] Updating source flux to 5.7e-15
[Sat Oct 29 12:38:57 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting