[Wed Jun 27 21:57:45 2012] Detection parameters:
  Position = (759.1, 556.9) = 13 35 49.08 37 30 59.1
  Extent = 0.5" x 0.5", rotation angle = 94 degrees
  Source counts = 20.4 +/- 4.6
  Background counts = 0.6
  Rate = 0.0008 +/- 0.0002

[Wed Jun 27 21:57:46 2012] Off-axis axis estimate = 3.17'
[Wed Jun 27 22:58:58 2012] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 22:58:58 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Jun 27 22:58:58 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.303
[Wed Jun 27 22:58:58 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.62"
[Wed Jun 27 23:20:13 2012] fullrun_ccd3_acisf12307_pi14-548_cl_pass0_src10.ximg exists
[Wed Jun 27 23:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12307_pi14-548_cl_pass0_src10.csv
[Wed Jun 27 23:20:13 2012] fullrun_ccd3_acisf12307_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Jun 27 23:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12307_pi14-548_cl_pass0_src10.csv
[Wed Jun 27 23:20:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12307_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12307_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 23:20:13 2012] fullrun_ccd3_acisf12307_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Jun 27 23:20:13 2012] fullrun_ccd3_acisf12307_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jun 27 23:20:13 2012] Fit fullrun_ccd3_acisf12307_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Jun 27 23:27:35 2012] Spatial fit model total counts = 21.274800, observed total counts = 23.000000
[Wed Jun 27 23:27:35 2012] Offset between fit and detection position for source 13 = 0.671106 pixels
[Wed Jun 27 23:27:35 2012] 21.369045 total counts/ 0.070845 bgd. counts: snr = 80.017942
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.671106 pixels
  Position = (759.6, 557.4) = 13 35 49.08 37 30 59.0
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 21.3 +/- 4.6
  Background counts = 0.1
  Rate = 0.0008 +/- 0.0002
[Wed Jun 27 23:27:35 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 23:27:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 23:27:35 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 23:27:35 2012] Source does appear to be extended
[Wed Jun 27 23:27:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 00:26:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 28 00:26:31 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Jun 28 00:26:31 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.803
[Thu Jun 28 00:26:31 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.58"
[Thu Jun 28 00:44:56 2012] fullrun_ccd3_acisf12307_pi14-548_cl_pass1_src10.ximg exists
[Thu Jun 28 00:44:57 2012] fullrun_ccd3_acisf12307_pi14-548_cl_pass1_src10_1.ximg exists
[Thu Jun 28 00:44:57 2012] Fit fullrun_ccd3_acisf12307_pi14-548_cl_pass1_src10 appears to have run properly
[Thu Jun 28 00:44:57 2012] fullrun_ccd3_acisf12307_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Thu Jun 28 00:44:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12307_pi14-548_cl_pass1_tfrozen_src10.csv
[Thu Jun 28 00:44:57 2012] fullrun_ccd3_acisf12307_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Jun 28 00:44:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12307_pi14-548_cl_pass1_tfrozen_src10.csv
[Thu Jun 28 00:44:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12307_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12307_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 00:47:42 2012] Spatial fit model total counts = 20.420500, observed total counts = 23.000000
[Thu Jun 28 00:47:42 2012] Offset between fit and detection position for source 13 = 0.021847 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.021847 pixels
  Position = (759.6, 557.4) = 13 35 49.08 37 30 59.1
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 20.4 +/- 4.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Thu Jun 28 00:47:42 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 00:47:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 00:47:42 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 00:47:42 2012] Source does appear to be extended
[Thu Jun 28 00:47:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 01:11:48 2012] Writing source region out to fullrun_ccd3_acisf12307_pi14-548_pass1_cl_src13_src.reg
[Thu Jun 28 01:11:48 2012] Extracting stamp from image fullrun_ccd3_acisf12307_pi14-548_cl_sm2.00.img.gz, (732, 530) - (787, 585)
[Thu Jun 28 01:11:48 2012] Writing fullrun_ccd3_acisf12307_pi14-548_pass1_cl_src13.gif
[Thu Jun 28 01:17:18 2012] Size of ../../acisf12307/products/events/fullrun_ccd3_acisf12307_pi14-548_pass1_cl_src13_src.evt.gz[events] = 21 counts
[Thu Jun 28 01:17:18 2012] Mean chipx,y = (483.05, 668.57)
[Thu Jun 28 01:17:18 2012] Mean tdetx,y = (4463.43, 3544.05)
[Thu Jun 28 01:17:18 2012] chipx,y range = (464.00-498.00, 653.00-687.00)
[Thu Jun 28 01:17:18 2012] Size of ../../acisf12307/products/events/fullrun_ccd3_acisf12307_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 3 counts
[Thu Jun 28 01:17:19 2012] Not generating rmf since there are only 20 counts
[Thu Jun 28 01:17:19 2012] arf not found, will run specextract
[Thu Jun 28 01:17:52 2012] ../../acisf12307/products/spectra/fullrun_ccd3_acisf12307_pi14-548_pass1_cl_src13.warf not found
[Thu Jun 28 01:17:52 2012] ../../acisf12307/products/spectra/fullrun_ccd3_acisf12307_pi14-548_pass1_cl_src13.wrmf not found
[Thu Jun 28 01:17:52 2012] Removal of ../../acisf12307/products/spectra/fullrun_ccd3_acisf12307_pi14-548_pass1_cl_src13.soff failed
[Thu Jun 28 01:27:40 2012] Spectrum 13 has only 20 counts, deleting rmf
[Thu Jun 28 01:27:40 2012] 184.364
[Thu Jun 28 01:28:23 2012] Updating aperture counts using extracted products
[Thu Jun 28 01:28:23 2012] Error reading totcts from fullrun_ccd3_acisf12307_pi14-548_pass1_cl_src13_src.pi.gz
[Thu Jun 28 01:28:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 01:28:23 2012] Using photon index=1.80, rate=0.000764, arf fullrun_ccd3_acisf12307_pi14-548_pass1_cl_src13.arf
[Thu Jun 28 01:28:23 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 28 01:28:23 2012] Updating source flux to 1e-14
[Thu Jun 28 01:28:33 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 28 01:28:34 2012] acisf12307/analysis//spectral/fullrun_ccd3_acisf12307_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete