[Wed Jun 27 21:56:35 2012] Detection parameters:
  Position = (523.6, 36.7) = 13 35 22.87 37 31 41.8
  Extent = 0.8" x 0.5", rotation angle = 32 degrees
  Source counts = 13.4 +/- 3.7
  Background counts = 0.6
  Rate = 0.0005 +/- 0.0001

[Wed Jun 27 21:56:36 2012] Off-axis axis estimate = 3.66'
[Wed Jun 27 22:17:43 2012] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 22:17:43 2012] Initial guess for spatial extent in simple fitting = 0.73"
[Wed Jun 27 22:17:43 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.011
[Wed Jun 27 22:17:43 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.73"
[Wed Jun 27 22:46:41 2012] fullrun_ccd1_acisf12307_pi14-548_cl_pass0_src11.ximg exists
[Wed Jun 27 22:46:41 2012] fullrun_ccd1_acisf12307_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Jun 27 22:46:41 2012] Fit fullrun_ccd1_acisf12307_pi14-548_cl_pass0_src11 appears to have run properly
[Wed Jun 27 22:46:41 2012] fullrun_ccd1_acisf12307_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 27 22:46:41 2012] fullrun_ccd1_acisf12307_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 27 22:46:41 2012] Fit fullrun_ccd1_acisf12307_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jun 27 23:27:32 2012] Spatial fit model total counts = 15.213400, observed total counts = 16.000000
[Wed Jun 27 23:27:32 2012] Offset between fit and detection position for source 1 = 0.603053 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.603053 pixels
  Position = (524.1, 37.1) = 13 35 22.88 37 31 41.7
  Extent = 0.9 (0.5-1.1)", rotation angle = 0
  Source counts = 15.3 +/- 3.9
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Wed Jun 27 23:27:32 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 23:27:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 23:27:32 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 23:27:32 2012] Source does appear to be extended
[Wed Jun 27 23:27:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 23:42:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 23:42:47 2012] Initial guess for spatial extent in simple fitting = 0.85"
[Wed Jun 27 23:42:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Wed Jun 27 23:42:47 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.85"
[Thu Jun 28 00:12:39 2012] fullrun_ccd1_acisf12307_pi14-548_cl_pass1_src11.ximg exists
[Thu Jun 28 00:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12307_pi14-548_cl_pass1_src11.csv
[Thu Jun 28 00:12:39 2012] fullrun_ccd1_acisf12307_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Jun 28 00:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12307_pi14-548_cl_pass1_src11.csv
[Thu Jun 28 00:12:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12307_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12307_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 00:12:39 2012] fullrun_ccd1_acisf12307_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 28 00:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12307_pi14-548_cl_pass1_tfrozen_src11.csv
[Thu Jun 28 00:12:39 2012] fullrun_ccd1_acisf12307_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 28 00:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12307_pi14-548_cl_pass1_tfrozen_src11.csv
[Thu Jun 28 00:12:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12307_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12307_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 00:47:38 2012] Spatial fit model total counts = 14.086300, observed total counts = 16.000000
[Thu Jun 28 00:47:38 2012] Offset between fit and detection position for source 1 = 0.140808 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.140808 pixels
  Position = (524.2, 37.2) = 13 35 22.87 37 31 41.8
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 14.2 +/- 3.8
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Thu Jun 28 00:47:38 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 00:47:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 00:47:38 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 00:47:38 2012] Source does appear to be extended
[Thu Jun 28 00:47:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 00:51:38 2012] Writing source region out to fullrun_ccd1_acisf12307_pi14-548_pass1_cl_src1_src.reg
[Thu Jun 28 00:51:38 2012] Extracting stamp from image fullrun_ccd1_acisf12307_pi14-548_cl_sm2.00.img.gz, (485, 0) - (564, 77)
[Thu Jun 28 00:51:38 2012] Writing fullrun_ccd1_acisf12307_pi14-548_pass1_cl_src1.gif
[Thu Jun 28 00:57:09 2012] Size of ../../acisf12307/products/events/fullrun_ccd1_acisf12307_pi14-548_pass1_cl_src1_src.evt.gz[events] = 15 counts
[Thu Jun 28 00:57:09 2012] Mean chipx,y = (17.80, 949.60)
[Thu Jun 28 00:57:09 2012] Mean tdetx,y = (4182.40, 4124.80)
[Thu Jun 28 00:57:09 2012] chipx,y range = (3.00-32.00, 931.00-964.00)
[Thu Jun 28 00:57:09 2012] Size of ../../acisf12307/products/events/fullrun_ccd1_acisf12307_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 10 counts
[Thu Jun 28 00:57:10 2012] Not generating rmf since there are only 14 counts
[Thu Jun 28 00:57:10 2012] arf not found, will run specextract
[Thu Jun 28 00:57:36 2012] ../../acisf12307/products/spectra/fullrun_ccd1_acisf12307_pi14-548_pass1_cl_src1.warf not found
[Thu Jun 28 00:57:36 2012] ../../acisf12307/products/spectra/fullrun_ccd1_acisf12307_pi14-548_pass1_cl_src1.wrmf not found
[Thu Jun 28 00:57:36 2012] Removal of ../../acisf12307/products/spectra/fullrun_ccd1_acisf12307_pi14-548_pass1_cl_src1.soff failed
[Thu Jun 28 01:01:10 2012] Spectrum 1 has only 14 counts, deleting rmf
[Thu Jun 28 01:01:10 2012] 135.454
[Thu Jun 28 01:28:22 2012] Updating aperture counts using extracted products
[Thu Jun 28 01:28:22 2012] Error reading totcts from fullrun_ccd1_acisf12307_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Jun 28 01:28:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 01:28:22 2012] Using photon index=1.80, rate=0.000532, arf fullrun_ccd1_acisf12307_pi14-548_pass1_cl_src1.arf
[Thu Jun 28 01:28:22 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 28 01:28:22 2012] Updating source flux to 9.3e-15
[Thu Jun 28 01:28:27 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting