[Fri Sep 23 10:21:09 2011] Detection parameters:
  Position = (836.9, 459.5) = 13 37 36.42 38 0 56.5
  Extent = 0.6" x 0.5", rotation angle = 25 degrees
  Source counts = 21.2 +/- 4.7
  Background counts = 0.8
  Rate = 0.0006 +/- 0.0001

[Fri Sep 23 10:21:10 2011] Off-axis axis estimate = 3.69'
[Fri Sep 23 10:21:59 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:21:59 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Sep 23 10:21:59 2011] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.239
[Fri Sep 23 10:21:59 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.74"
[Fri Sep 23 10:22:01 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src11.ximg exists
[Fri Sep 23 10:22:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src11.csv
[Fri Sep 23 10:22:01 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Sep 23 10:22:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src11.csv
[Fri Sep 23 10:22:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:22:01 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Sep 23 10:22:01 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Sep 23 10:22:01 2011] Fit fullrun_ccd3_acisf12306_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Sep 23 10:22:10 2011] Spatial fit model total counts = 25.406900, observed total counts = 25.000000
[Fri Sep 23 10:22:10 2011] Offset between fit and detection position for source 5 = 0.726046 pixels
[Fri Sep 23 10:22:10 2011] 25.040530 total counts/ 3.294430 bgd. counts: snr = 11.980950
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.726046 pixels
  Position = (837.3, 460.0) = 13 37 36.42 38 0 56.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 21.7 +/- 5.0
  Background counts = 3.3
  Rate = 0.0006 +/- 0.0001
[Fri Sep 23 10:22:10 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:22:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:22:10 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:22:10 2011] Source does appear to be extended
[Fri Sep 23 10:22:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:22:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:22:27 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Sep 23 10:22:27 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.966
[Fri Sep 23 10:22:27 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.62"
[Fri Sep 23 10:22:28 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src11.ximg exists
[Fri Sep 23 10:22:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src11.csv
[Fri Sep 23 10:22:28 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Sep 23 10:22:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src11.csv
[Fri Sep 23 10:22:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:22:28 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Sep 23 10:22:28 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Sep 23 10:22:28 2011] Fit fullrun_ccd3_acisf12306_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Sep 23 10:22:36 2011] Spatial fit model total counts = 23.109600, observed total counts = 24.000000
[Fri Sep 23 10:22:36 2011] Offset between fit and detection position for source 5 = 0.157184 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.157184 pixels
  Position = (837.5, 460.0) = 13 37 36.41 38 0 56.5
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 22.9 +/- 4.8
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Fri Sep 23 10:22:36 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:22:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:22:36 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:22:36 2011] Source does appear to be extended
[Fri Sep 23 10:22:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:23:55 2011] Not overwriting source region fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_src.reg
[Fri Sep 23 10:23:55 2011] Extracting stamp from image fullrun_ccd3_acisf12306_pi14-548_cl_sm2.00.img.gz, (806, 429) - (868, 491)
[Fri Sep 23 10:23:55 2011] Writing fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5.gif
[Fri Sep 23 10:24:27 2011] ../../acisf12306/products/events/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_src.evt and ../../acisf12306/products/events/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Sep 23 10:24:27 2011] Size of ../../acisf12306/products/events/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_src.evt.gz[events] = 22 counts
[Fri Sep 23 10:24:27 2011] Mean chipx,y = (785.91, 598.55)
[Fri Sep 23 10:24:27 2011] Mean tdetx,y = (4533.45, 3846.91)
[Fri Sep 23 10:24:27 2011] chipx,y range = (767.00-798.00, 584.00-615.00)
[Fri Sep 23 10:24:28 2011] Size of ../../acisf12306/products/events/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 14 counts
[Fri Sep 23 10:24:28 2011] ../../acisf12306/products/images/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_src.img and ../../acisf12306/products/images/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Sep 23 10:24:28 2011] ../../acisf12306/products/spectra/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_src.pi and ../../acisf12306/products/spectra/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Sep 23 10:24:28 2011] Not generating rmf since there are only 22 counts
[Fri Sep 23 10:24:31 2011] ../../acisf12306/products/lightcurves/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_src.lc and ../../acisf12306/products/lightcurves/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Sep 23 10:25:44 2011] 184.874
[Fri Sep 23 10:25:54 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:25:54 2011] Error reading totcts from fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Sep 23 10:25:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:25:54 2011] Using photon index=1.80, rate=0.000681, arf fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5.arf
[Fri Sep 23 10:25:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 10:25:54 2011] Updating source flux to 8.9e-15
[Fri Sep 23 10:26:08 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 10:26:09 2011] acisf12306/analysis//spectral/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete