[Fri Sep 23 10:21:10 2011] Detection parameters:
  Position = (417.5, 168.4) = 13 37 53.87 37 58 33.3
  Extent = 0.6" x 0.5", rotation angle = 116 degrees
  Source counts = 20.3 +/- 4.6
  Background counts = 0.7
  Rate = 0.0006 +/- 0.0001

[Fri Sep 23 10:21:10 2011] Off-axis axis estimate = 1.86'
[Fri Sep 23 10:21:59 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:21:59 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Sep 23 10:21:59 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.238
[Fri Sep 23 10:21:59 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.42"
[Fri Sep 23 10:22:01 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src12.ximg exists
[Fri Sep 23 10:22:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src12.csv
[Fri Sep 23 10:22:01 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Sep 23 10:22:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src12.csv
[Fri Sep 23 10:22:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12306_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:22:01 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Sep 23 10:22:01 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Sep 23 10:22:01 2011] Fit fullrun_ccd3_acisf12306_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Sep 23 10:22:10 2011] Spatial fit model total counts = 20.369100, observed total counts = 23.000000
[Fri Sep 23 10:22:10 2011] Offset between fit and detection position for source 16 = 0.718981 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.718981 pixels
  Position = (418.0, 168.9) = 13 37 53.87 37 58 33.3
  Extent = 0.9 (0.7-1.1)" x 0.3 (0.3-0.5)", rotation angle = 66 (53-77) degrees
  Source counts = 20.1 +/- 4.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Sep 23 10:22:10 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:22:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:22:10 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:22:10 2011] Source does appear to be extended
[Fri Sep 23 10:22:10 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.44
[Fri Sep 23 10:22:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:22:27 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Sep 23 10:22:27 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.340
[Fri Sep 23 10:22:27 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.60"
[Fri Sep 23 10:22:28 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src12.ximg exists
[Fri Sep 23 10:22:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src12.csv
[Fri Sep 23 10:22:28 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src12_1.ximg exists
[Fri Sep 23 10:22:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src12.csv
[Fri Sep 23 10:22:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12306_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:22:28 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri Sep 23 10:22:28 2011] fullrun_ccd3_acisf12306_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Sep 23 10:22:28 2011] Fit fullrun_ccd3_acisf12306_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Sep 23 10:22:36 2011] Spatial fit model total counts = 21.667200, observed total counts = 21.000000
[Fri Sep 23 10:22:36 2011] Offset between fit and detection position for source 16 = 0.283990 pixels
[Fri Sep 23 10:22:36 2011] 21.866450 total counts/ 1.196650 bgd. counts: snr = 18.895253
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.283990 pixels
  Position = (418.1, 168.7) = 13 37 53.87 37 58 33.2
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 20.7 +/- 4.7
  Background counts = 1.2
  Rate = 0.0006 +/- 0.0001
[Fri Sep 23 10:22:36 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:22:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:22:36 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:22:36 2011] Source does appear to be extended
[Fri Sep 23 10:22:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:23:55 2011] Not overwriting source region fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_src.reg
[Fri Sep 23 10:23:55 2011] Extracting stamp from image fullrun_ccd3_acisf12306_pi14-548_cl_sm2.00.img.gz, (394, 145) - (442, 193)
[Fri Sep 23 10:23:55 2011] Writing fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16.gif
[Fri Sep 23 10:24:31 2011] ../../acisf12306/products/events/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_src.evt and ../../acisf12306/products/events/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Fri Sep 23 10:24:31 2011] Size of ../../acisf12306/products/events/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_src.evt.gz[events] = 20 counts
[Fri Sep 23 10:24:31 2011] Mean chipx,y = (407.00, 950.80)
[Fri Sep 23 10:24:31 2011] Mean tdetx,y = (4181.20, 3468.00)
[Fri Sep 23 10:24:31 2011] chipx,y range = (391.00-424.00, 933.00-966.00)
[Fri Sep 23 10:24:31 2011] Size of ../../acisf12306/products/events/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 9 counts
[Fri Sep 23 10:24:31 2011] ../../acisf12306/products/images/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_src.img and ../../acisf12306/products/images/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Fri Sep 23 10:24:31 2011] ../../acisf12306/products/spectra/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_src.pi and ../../acisf12306/products/spectra/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Fri Sep 23 10:24:31 2011] Not generating rmf since there are only 20 counts
[Fri Sep 23 10:24:34 2011] ../../acisf12306/products/lightcurves/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_src.lc and ../../acisf12306/products/lightcurves/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Fri Sep 23 10:25:44 2011] 195.262
[Fri Sep 23 10:25:54 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:25:54 2011] Error reading totcts from fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_src.pi.gz
[Fri Sep 23 10:25:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:25:54 2011] Using photon index=1.80, rate=0.000615, arf fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16.arf
[Fri Sep 23 10:25:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 10:25:54 2011] Updating source flux to 7.7e-15
[Fri Sep 23 10:26:08 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 10:26:09 2011] acisf12306/analysis//spectral/fullrun_ccd3_acisf12306_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete