[Mon Jan 30 17:41:46 2012] Detection parameters:
  Position = (676.7, 681.7) = 8 49 47.34 45 14 11.2
  Extent = 0.7" x 0.6", rotation angle = 116 degrees
  Source counts = 35.1 +/- 6.0
  Background counts = 0.9
  Rate = 0.001 +/- 0.0002

[Mon Jan 30 17:41:47 2012] Off-axis axis estimate = 4.82'
[Mon Jan 30 18:25:46 2012] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Mon Jan 30 18:25:46 2012] Initial guess for spatial extent in simple fitting = 1.11"
[Mon Jan 30 18:25:46 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.823
[Mon Jan 30 18:25:46 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 1.11"
[Mon Jan 30 18:50:30 2012] fullrun_ccd2_acisf12305_pi14-548_cl_pass0_src5.ximg exists
[Mon Jan 30 18:50:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12305_pi14-548_cl_pass0_src5.csv
[Mon Jan 30 18:50:30 2012] fullrun_ccd2_acisf12305_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Jan 30 18:50:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12305_pi14-548_cl_pass0_src5.csv
[Mon Jan 30 18:50:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12305_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12305_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 30 18:50:30 2012] fullrun_ccd2_acisf12305_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Jan 30 18:50:30 2012] fullrun_ccd2_acisf12305_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jan 30 18:50:30 2012] Fit fullrun_ccd2_acisf12305_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jan 30 19:03:56 2012] Spatial fit model total counts = 39.999900, observed total counts = 40.000000
[Mon Jan 30 19:03:56 2012] Offset between fit and detection position for source 6 = 0.826904 pixels
[Mon Jan 30 19:03:56 2012] 40.363130 total counts/ 8.827730 bgd. counts: snr = 10.613871
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.826904 pixels
  Position = (677.2, 682.3) = 8 49 47.33 45 14 11.2
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 31.5 +/- 6.4
  Background counts = 8.8
  Rate = 0.001 +/- 0.0002
[Mon Jan 30 19:03:56 2012] Vigneting correction estimate = 1.000000
[Mon Jan 30 19:03:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 30 19:03:56 2012] Assessing source extent using major axis lower bound
[Mon Jan 30 19:03:56 2012] Source does appear to be extended
[Mon Jan 30 19:03:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 30 19:53:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 30 19:53:32 2012] Initial guess for spatial extent in simple fitting = 0.76"
[Mon Jan 30 19:53:32 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.959
[Mon Jan 30 19:53:32 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.76"
[Mon Jan 30 20:16:51 2012] fullrun_ccd2_acisf12305_pi14-548_cl_pass1_src5.ximg exists
[Mon Jan 30 20:16:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12305_pi14-548_cl_pass1_src5.csv
[Mon Jan 30 20:16:51 2012] fullrun_ccd2_acisf12305_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Jan 30 20:16:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12305_pi14-548_cl_pass1_src5.csv
[Mon Jan 30 20:16:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12305_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12305_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 30 20:16:51 2012] fullrun_ccd2_acisf12305_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Jan 30 20:16:51 2012] fullrun_ccd2_acisf12305_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jan 30 20:16:51 2012] Fit fullrun_ccd2_acisf12305_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jan 30 20:31:59 2012] Spatial fit model total counts = 40.000100, observed total counts = 40.000000
[Mon Jan 30 20:31:59 2012] Offset between fit and detection position for source 6 = 0.021866 pixels
[Mon Jan 30 20:31:59 2012] 39.965210 total counts/ 8.074710 bgd. counts: snr = 11.222713
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.021866 pixels
  Position = (677.3, 682.3) = 8 49 47.33 45 14 11.2
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 31.9 +/- 6.3
  Background counts = 8.1
  Rate = 0.001 +/- 0.0002
[Mon Jan 30 20:31:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan 30 20:31:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 30 20:31:59 2012] Assessing source extent using major axis lower bound
[Mon Jan 30 20:31:59 2012] Source does appear to be extended
[Mon Jan 30 20:31:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 30 20:42:17 2012] Writing source region out to fullrun_ccd2_acisf12305_pi14-548_pass1_cl_src6_src.reg
[Mon Jan 30 20:42:17 2012] Extracting stamp from image fullrun_ccd2_acisf12305_pi14-548_cl_sm2.00.img.gz, (642, 647) - (712, 717)
[Mon Jan 30 20:42:17 2012] Writing fullrun_ccd2_acisf12305_pi14-548_pass1_cl_src6.gif
[Mon Jan 30 20:44:54 2012] Size of ../../acisf12305/products/events/fullrun_ccd2_acisf12305_pi14-548_pass1_cl_src6_src.evt.gz[events] = 37 counts
[Mon Jan 30 20:44:54 2012] Mean chipx,y = (481.62, 455.49)
[Mon Jan 30 20:44:54 2012] Mean tdetx,y = (3516.49, 3604.38)
[Mon Jan 30 20:44:54 2012] chipx,y range = (467.00-501.00, 437.00-473.00)
[Mon Jan 30 20:44:54 2012] Size of ../../acisf12305/products/events/fullrun_ccd2_acisf12305_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 10 counts
[Mon Jan 30 20:44:56 2012] Not generating rmf since there are only 31 counts
[Mon Jan 30 20:44:56 2012] arf not found, will run specextract
[Mon Jan 30 20:45:20 2012] ../../acisf12305/products/spectra/fullrun_ccd2_acisf12305_pi14-548_pass1_cl_src6.warf not found
[Mon Jan 30 20:45:20 2012] ../../acisf12305/products/spectra/fullrun_ccd2_acisf12305_pi14-548_pass1_cl_src6.wrmf not found
[Mon Jan 30 20:45:20 2012] Removal of ../../acisf12305/products/spectra/fullrun_ccd2_acisf12305_pi14-548_pass1_cl_src6.soff failed
[Mon Jan 30 20:56:42 2012] Spectrum 6 has only 32 counts, deleting rmf
[Mon Jan 30 20:56:42 2012] 183.064
[Mon Jan 30 21:11:24 2012] Updating aperture counts using extracted products
[Mon Jan 30 21:11:24 2012] Error reading totcts from fullrun_ccd2_acisf12305_pi14-548_pass1_cl_src6_src.pi.gz
[Mon Jan 30 21:11:24 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 30 21:11:24 2012] Using photon index=1.80, rate=0.00111, arf fullrun_ccd2_acisf12305_pi14-548_pass1_cl_src6.arf
[Mon Jan 30 21:11:24 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jan 30 21:11:24 2012] Updating source flux to 1.4e-14
[Mon Jan 30 21:11:38 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan 30 21:11:39 2012] acisf12305/analysis//spectral/fullrun_ccd2_acisf12305_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete