[Tue Apr 10 16:26:45 2012] Detection parameters:
  Position = (218.2, 960.4) = 9 55 9.10 68 53 38.3
  Extent = 1.5" x 1.1", rotation angle = 76 degrees
  Source counts = 131.3 +/- 12.5
  Background counts = 25.7
  Rate = 0.002 +/- 0.0002

[Tue Apr 10 16:26:45 2012] Off-axis axis estimate = 7.92'
[Tue Apr 10 16:28:33 2012] Using EEF radius (= 2.77 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:28:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 16:28:33 2012] Initial guess for spatial extent in simple fitting = 2.77"
[Tue Apr 10 16:28:33 2012] source mask rpix=5.6, npix_max = 150, mask sum = 156, frac = 1.034
[Tue Apr 10 16:28:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.77"
[Tue Apr 10 16:28:33 2012] fullrun_ccd3_acisf12301_pi14-548_cl_pass0_src1.ximg exists
[Tue Apr 10 16:28:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12301_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 16:28:33 2012] fullrun_ccd3_acisf12301_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Apr 10 16:28:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12301_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 16:28:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12301_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12301_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:28:35 2012] fullrun_ccd3_acisf12301_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 16:28:35 2012] fullrun_ccd3_acisf12301_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 16:28:35 2012] Fit fullrun_ccd3_acisf12301_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 16:29:01 2012] Spatial fit model total counts = 185.045000, observed total counts = 186.000000
[Tue Apr 10 16:29:01 2012] Offset between fit and detection position for source 2 = 0.603758 pixels
[Tue Apr 10 16:29:01 2012] 185.261800 total counts/ 55.430800 bgd. counts: snr = 17.438247
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.603758 pixels
  Position = (218.8, 960.5) = 9 55 9.09 68 53 38.2
  Extent = 2.3 (2.0-2.7)", rotation angle = 0
  Source counts = 129.8 +/- 13.6
  Background counts = 55.4
  Rate = 0.002 +/- 0.0002
[Tue Apr 10 16:29:01 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:29:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:29:01 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:29:01 2012] Source does appear to be extended
[Tue Apr 10 16:29:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:29:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:29:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 16:29:50 2012] Initial guess for spatial extent in simple fitting = 2.34"
[Tue Apr 10 16:29:50 2012] source mask rpix=4.8, npix_max = 110, mask sum = 110, frac = 0.993
[Tue Apr 10 16:29:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.34"
[Tue Apr 10 16:29:50 2012] fullrun_ccd3_acisf12301_pi14-548_cl_pass1_src1.ximg exists
[Tue Apr 10 16:29:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12301_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 16:29:50 2012] fullrun_ccd3_acisf12301_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Apr 10 16:29:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12301_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 16:29:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12301_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12301_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:29:50 2012] fullrun_ccd3_acisf12301_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 16:29:50 2012] fullrun_ccd3_acisf12301_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 16:29:50 2012] Fit fullrun_ccd3_acisf12301_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 16:30:07 2012] Spatial fit model total counts = 166.998000, observed total counts = 167.000000
[Tue Apr 10 16:30:07 2012] Offset between fit and detection position for source 2 = 0.113537 pixels
[Tue Apr 10 16:30:07 2012] 166.960100 total counts/ 31.448100 bgd. counts: snr = 24.164652
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.113537 pixels
  Position = (218.7, 960.6) = 9 55 9.09 68 53 38.2
  Extent = 2.4 (2.1-3.0)", rotation angle = 0
  Source counts = 135.5 +/- 12.9
  Background counts = 31.4
  Rate = 0.002 +/- 0.0002
[Tue Apr 10 16:30:07 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:30:07 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:30:07 2012] Source does appear to be extended
[Tue Apr 10 16:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:30:58 2012] Not overwriting source region fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_src.reg
[Tue Apr 10 16:30:58 2012] Extracting stamp from image fullrun_ccd3_acisf12301_pi14-548_cl_sm2.00.img.gz, (107, 849) - (330, 1053)
[Tue Apr 10 16:30:58 2012] Writing fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2.gif
[Tue Apr 10 16:30:59 2012] ../../acisf12301/products/events/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_src.evt and ../../acisf12301/products/events/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Apr 10 16:30:59 2012] Size of ../../acisf12301/products/events/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_src.evt.gz[events] = 165 counts
[Tue Apr 10 16:30:59 2012] Mean chipx,y = (80.47, 822.04)
[Tue Apr 10 16:30:59 2012] Mean tdetx,y = (4309.96, 3141.47)
[Tue Apr 10 16:30:59 2012] chipx,y range = (48.00-110.00, 792.00-849.00)
[Tue Apr 10 16:30:59 2012] Size of ../../acisf12301/products/events/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 391 counts
[Tue Apr 10 16:30:59 2012] ../../acisf12301/products/images/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_src.img and ../../acisf12301/products/images/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Apr 10 16:30:59 2012] ../../acisf12301/products/spectra/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_src.pi and ../../acisf12301/products/spectra/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Apr 10 16:31:02 2012] ../../acisf12301/products/lightcurves/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_src.lc and ../../acisf12301/products/lightcurves/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Apr 10 16:31:25 2012] Keeping rmf generated by specextract
[Tue Apr 10 16:31:25 2012] 172.783
[Tue Apr 10 16:38:10 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:38:10 2012] Error reading totcts from fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Apr 10 16:38:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:38:10 2012] Using photon index=1.80, rate=0.00174, arf fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2.arf
[Tue Apr 10 16:38:10 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 16:38:10 2012] Updating source flux to 2.3e-14
[Tue Apr 10 16:38:24 2012] Reading fit data from acisf12301/analysis//spectral/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_pl.csv
[Tue Apr 10 16:38:24 2012] Spectral fit parameter nH value = 3.09471e+21
[Tue Apr 10 16:38:24 2012] Spectral fit parameter PhoIndex value = 2.09593
[Tue Apr 10 16:38:24 2012] Failed to get F(0.3-8.0) from acisf12301/analysis//spectral/fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 16:38:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:38:24 2012] Using Nh = 3.1e+21, photon index=2.10, rate=0.00174, arf fullrun_ccd3_acisf12301_pi14-548_pass1_cl_src2.arf
[Tue Apr 10 16:38:24 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 16:38:24 2012] Updating source flux to 2.1e-14