[Sat Feb 18 15:44:42 2012] Detection parameters:
  Position = (871.4, 244.6) = 3 59 12.10 -29 57 44.6
  Extent = 0.5" x 0.5", rotation angle = 66 degrees
  Source counts = 35.3 +/- 6.0
  Background counts = 0.7
  Rate = 0.001 +/- 0.0002

[Sat Feb 18 15:44:42 2012] Off-axis axis estimate = 2.93'
[Sat Feb 18 16:11:35 2012] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 16:11:35 2012] Initial guess for spatial extent in simple fitting = 0.57"
[Sat Feb 18 16:11:35 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.827
[Sat Feb 18 16:11:35 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.57"
[Sat Feb 18 16:26:30 2012] fullrun_ccd2_acisf12300_pi14-548_cl_pass0_src3.ximg exists
[Sat Feb 18 16:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12300_pi14-548_cl_pass0_src3.csv
[Sat Feb 18 16:26:30 2012] fullrun_ccd2_acisf12300_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Feb 18 16:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12300_pi14-548_cl_pass0_src3.csv
[Sat Feb 18 16:26:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12300_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12300_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 16:26:31 2012] fullrun_ccd2_acisf12300_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Feb 18 16:26:31 2012] fullrun_ccd2_acisf12300_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Feb 18 16:26:31 2012] Fit fullrun_ccd2_acisf12300_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Feb 18 17:00:57 2012] Spatial fit model total counts = 33.145600, observed total counts = 36.000000
[Sat Feb 18 17:00:57 2012] Offset between fit and detection position for source 12 = 0.602046 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.602046 pixels
  Position = (871.7, 245.1) = 3 59 12.11 -29 57 44.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 33.7 +/- 5.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Feb 18 17:00:57 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 17:00:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 17:00:57 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 17:00:57 2012] Source does appear to be extended
[Sat Feb 18 17:00:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 17:22:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 17:22:27 2012] Initial guess for spatial extent in simple fitting = 0.52"
[Sat Feb 18 17:22:27 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.919
[Sat Feb 18 17:22:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.52"
[Sat Feb 18 17:31:51 2012] fullrun_ccd2_acisf12300_pi14-548_cl_pass1_src3.ximg exists
[Sat Feb 18 17:31:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12300_pi14-548_cl_pass1_src3.csv
[Sat Feb 18 17:31:51 2012] fullrun_ccd2_acisf12300_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Feb 18 17:31:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12300_pi14-548_cl_pass1_src3.csv
[Sat Feb 18 17:31:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12300_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12300_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 17:31:51 2012] fullrun_ccd2_acisf12300_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Feb 18 17:31:51 2012] fullrun_ccd2_acisf12300_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Feb 18 17:31:51 2012] Fit fullrun_ccd2_acisf12300_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Feb 18 18:13:46 2012] Spatial fit model total counts = 34.844900, observed total counts = 36.000000
[Sat Feb 18 18:13:46 2012] Offset between fit and detection position for source 12 = 0.036253 pixels
[Sat Feb 18 18:13:46 2012] 35.373872 total counts/ 0.002272 bgd. counts: snr = 742.025797
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.036253 pixels
  Position = (871.7, 245.1) = 3 59 12.11 -29 57 44.5
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 35.4 +/- 5.9
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Feb 18 18:13:46 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 18:13:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 18:13:46 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 18:13:46 2012] Source does appear to be extended
[Sat Feb 18 18:13:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 18:20:13 2012] Writing source region out to fullrun_ccd2_acisf12300_pi14-548_pass1_cl_src12_src.reg
[Sat Feb 18 18:20:13 2012] Extracting stamp from image fullrun_ccd2_acisf12300_pi14-548_cl_sm2.00.img.gz, (848, 221) - (896, 269)
[Sat Feb 18 18:20:13 2012] Writing fullrun_ccd2_acisf12300_pi14-548_pass1_cl_src12.gif
[Sat Feb 18 18:21:23 2012] Size of ../../acisf12300/products/events/fullrun_ccd2_acisf12300_pi14-548_pass1_cl_src12_src.evt.gz[events] = 34 counts
[Sat Feb 18 18:21:23 2012] Mean chipx,y = (112.00, 715.47)
[Sat Feb 18 18:21:23 2012] Mean tdetx,y = (3776.47, 3974.00)
[Sat Feb 18 18:21:23 2012] chipx,y range = (98.00-131.00, 695.00-729.00)
[Sat Feb 18 18:21:23 2012] ../../acisf12300/products/events/fullrun_ccd2_acisf12300_pi14-548_pass1_cl_src12_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Sat Feb 18 18:27:08 2012] No arf file found
[Sat Feb 18 18:33:07 2012] Updating aperture counts using extracted products
[Sat Feb 18 18:33:07 2012] Error reading totcts from fullrun_ccd2_acisf12300_pi14-548_pass1_cl_src12_src.pi
[Sat Feb 18 18:33:07 2012] No arf file for this source, not re-computing flux
[Sat Feb 18 18:33:11 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting