[Sat Feb 18 15:44:13 2012] Detection parameters:
  Position = (381.2, 850.5) = 3 58 44.01 -29 59 32.3
  Extent = 0.8" x 0.7", rotation angle = 114 degrees
  Source counts = 11.1 +/- 3.5
  Background counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Sat Feb 18 15:44:13 2012] Off-axis axis estimate = 4.95'
[Sat Feb 18 15:58:17 2012] Using EEF radius (= 1.16 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 15:58:17 2012] Initial guess for spatial extent in simple fitting = 1.16"
[Sat Feb 18 15:58:17 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.920
[Sat Feb 18 15:58:17 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 1.16"
[Sat Feb 18 16:11:35 2012] fullrun_ccd1_acisf12300_pi14-548_cl_pass0_src7.ximg exists
[Sat Feb 18 16:11:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12300_pi14-548_cl_pass0_src7.csv
[Sat Feb 18 16:11:35 2012] fullrun_ccd1_acisf12300_pi14-548_cl_pass0_src7_1.ximg exists
[Sat Feb 18 16:11:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12300_pi14-548_cl_pass0_src7.csv
[Sat Feb 18 16:11:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12300_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12300_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 16:11:35 2012] fullrun_ccd1_acisf12300_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sat Feb 18 16:11:35 2012] fullrun_ccd1_acisf12300_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Feb 18 16:11:35 2012] Fit fullrun_ccd1_acisf12300_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Feb 18 17:00:56 2012] Spatial fit model total counts = 12.524600, observed total counts = 13.000000
[Sat Feb 18 17:00:56 2012] Offset between fit and detection position for source 5 = 0.831535 pixels
[Sat Feb 18 17:00:56 2012] 12.352500 total counts/ 0.000000 bgd. counts: snr = 72700263274053.296875
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.831535 pixels
  Position = (381.9, 850.9) = 3 58 44.00 -29 59 32.3
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 12.4 +/- 3.5
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat Feb 18 17:00:56 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 17:00:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 17:00:56 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 17:00:56 2012] Source does appear to be extended
[Sat Feb 18 17:00:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 17:11:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 17:11:14 2012] Initial guess for spatial extent in simple fitting = 0.95"
[Sat Feb 18 17:11:14 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.842
[Sat Feb 18 17:11:14 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.95"
[Sat Feb 18 17:22:27 2012] fullrun_ccd1_acisf12300_pi14-548_cl_pass1_src6.ximg exists
[Sat Feb 18 17:22:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12300_pi14-548_cl_pass1_src6.csv
[Sat Feb 18 17:22:27 2012] fullrun_ccd1_acisf12300_pi14-548_cl_pass1_src6_1.ximg exists
[Sat Feb 18 17:22:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12300_pi14-548_cl_pass1_src6.csv
[Sat Feb 18 17:22:27 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12300_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12300_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 17:22:27 2012] fullrun_ccd1_acisf12300_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sat Feb 18 17:22:27 2012] fullrun_ccd1_acisf12300_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Feb 18 17:22:27 2012] Fit fullrun_ccd1_acisf12300_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Feb 18 18:13:44 2012] Spatial fit model total counts = 11.996800, observed total counts = 12.000000
[Sat Feb 18 18:13:44 2012] Offset between fit and detection position for source 5 = 0.115546 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.115546 pixels
  Position = (381.8, 851.0) = 3 58 44.01 -29 59 32.3
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 12.0 +/- 3.5
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat Feb 18 18:13:44 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 18:13:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 18:13:44 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 18:13:44 2012] Source does appear to be extended
[Sat Feb 18 18:13:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 18:16:21 2012] Writing source region out to fullrun_ccd1_acisf12300_pi14-548_pass1_cl_src5_src.reg
[Sat Feb 18 18:16:21 2012] Extracting stamp from image fullrun_ccd1_acisf12300_pi14-548_cl_sm2.00.img.gz, (335, 804) - (429, 898)
[Sat Feb 18 18:16:21 2012] Writing fullrun_ccd1_acisf12300_pi14-548_pass1_cl_src5.gif
[Sat Feb 18 18:19:08 2012] Size of ../../acisf12300/products/events/fullrun_ccd1_acisf12300_pi14-548_pass1_cl_src5_src.evt.gz[events] = 12 counts
[Sat Feb 18 18:19:08 2012] Mean chipx,y = (218.50, 670.25)
[Sat Feb 18 18:19:08 2012] Mean tdetx,y = (4461.75, 4325.50)
[Sat Feb 18 18:19:08 2012] chipx,y range = (199.00-236.00, 651.00-683.00)
[Sat Feb 18 18:19:08 2012] Size of ../../acisf12300/products/events/fullrun_ccd1_acisf12300_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 18 counts
[Sat Feb 18 18:19:09 2012] Not generating rmf since there are only 11 counts
[Sat Feb 18 18:19:09 2012] arf not found, will run specextract
[Sat Feb 18 18:19:32 2012] ../../acisf12300/products/spectra/fullrun_ccd1_acisf12300_pi14-548_pass1_cl_src5.warf not found
[Sat Feb 18 18:19:32 2012] ../../acisf12300/products/spectra/fullrun_ccd1_acisf12300_pi14-548_pass1_cl_src5.wrmf not found
[Sat Feb 18 18:19:32 2012] Removal of ../../acisf12300/products/spectra/fullrun_ccd1_acisf12300_pi14-548_pass1_cl_src5.soff failed
[Sat Feb 18 18:20:13 2012] Spectrum 5 has only 12 counts, deleting rmf
[Sat Feb 18 18:20:13 2012] 193.04
[Sat Feb 18 18:33:07 2012] Updating aperture counts using extracted products
[Sat Feb 18 18:33:07 2012] Error reading totcts from fullrun_ccd1_acisf12300_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Feb 18 18:33:07 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 18:33:07 2012] Using photon index=1.80, rate=0.000405, arf fullrun_ccd1_acisf12300_pi14-548_pass1_cl_src5.arf
[Sat Feb 18 18:33:07 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 18 18:33:07 2012] Updating source flux to 5e-15
[Sat Feb 18 18:33:10 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 18 18:33:11 2012] acisf12300/analysis//spectral/fullrun_ccd1_acisf12300_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete