[Fri Oct  7 04:48:54 2011] Detection parameters:
  Position = (896.2, 1226.1) = 16 17 36.25 -51 2 24.5
  Extent = 0.5" x 0.5", rotation angle = 33 degrees
  Source counts = 1119.1 +/- 34.9
  Background counts = 100.9
  Rate = 0.09 +/- 0.003

[Fri Oct  7 04:49:03 2011] Off-axis axis estimate = 1.22'
[Fri Oct  7 04:52:32 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 04:52:32 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct  7 04:52:32 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.613
[Fri Oct  7 04:52:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Fri Oct  7 04:52:43 2011] fullrun_ccd2_acisf00123_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 04:52:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00123_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 04:52:43 2011] fullrun_ccd2_acisf00123_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 04:52:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00123_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 04:52:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00123_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00123_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 04:52:54 2011] fullrun_ccd2_acisf00123_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 04:52:54 2011] fullrun_ccd2_acisf00123_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 04:52:54 2011] Fit fullrun_ccd2_acisf00123_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 04:54:09 2011] Spatial fit model total counts = 1131.000000, observed total counts = 1131.000000
[Fri Oct  7 04:54:09 2011] Offset between fit and detection position for source 9 = 1.242842 pixels
[Fri Oct  7 04:54:09 2011] 1134.556000 total counts/ 291.192000 bgd. counts: snr = 49.422572
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.242842 pixels
  Position = (897.4, 1226.0) = 16 17 36.21 -51 2 24.8
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 843.4 +/- 33.7
  Background counts = 291.2
  Rate = 0.07 +/- 0.003
[Fri Oct  7 04:54:10 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 04:54:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 04:54:10 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 04:54:10 2011] Source does appear to be extended
[Fri Oct  7 04:54:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 04:55:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 04:55:00 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Oct  7 04:55:00 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.844
[Fri Oct  7 04:55:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.41"
[Fri Oct  7 04:55:01 2011] fullrun_ccd2_acisf00123_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 04:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00123_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 04:55:01 2011] fullrun_ccd2_acisf00123_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 04:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00123_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 04:55:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00123_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00123_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 04:55:04 2011] fullrun_ccd2_acisf00123_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 04:55:04 2011] fullrun_ccd2_acisf00123_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 04:55:04 2011] Fit fullrun_ccd2_acisf00123_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 04:55:33 2011] Spatial fit model total counts = 1143.000000, observed total counts = 1143.000000
[Fri Oct  7 04:55:33 2011] Offset between fit and detection position for source 9 = 0.002024 pixels
[Fri Oct  7 04:55:33 2011] 1142.930000 total counts/ 298.821000 bgd. counts: snr = 48.830703
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.002024 pixels
  Position = (897.4, 1226.0) = 16 17 36.21 -51 2 24.8
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 844.1 +/- 33.8
  Background counts = 298.8
  Rate = 0.07 +/- 0.003
[Fri Oct  7 04:55:33 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 04:55:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 04:55:33 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 04:55:33 2011] Source does appear to be extended
[Fri Oct  7 04:55:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:09:13 2011] Not overwriting source region fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_src.reg
[Fri Oct  7 05:09:13 2011] Extracting stamp from image fullrun_ccd2_acisf00123_pi14-548_cl_sm2.00.img.gz, (879, 1207) - (916, 1245)
[Fri Oct  7 05:09:13 2011] Writing fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9.gif
[Fri Oct  7 05:09:26 2011] ../../acisf00123/products/events/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_src.evt and ../../acisf00123/products/events/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Oct  7 05:09:26 2011] Size of ../../acisf00123/products/events/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_src.evt.gz[events] = 907 counts
[Fri Oct  7 05:09:26 2011] Mean chipx,y = (81.95, 934.43)
[Fri Oct  7 05:09:26 2011] Mean tdetx,y = (3995.43, 4004.05)
[Fri Oct  7 05:09:26 2011] chipx,y range = (62.00-101.00, 916.00-953.00)
[Fri Oct  7 05:09:26 2011] Size of ../../acisf00123/products/events/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 273 counts
[Fri Oct  7 05:09:27 2011] ../../acisf00123/products/images/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_src.img and ../../acisf00123/products/images/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Oct  7 05:09:27 2011] rmf not found, will run specextract
[Fri Oct  7 05:09:35 2011] ../../acisf00123/products/spectra/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_bkg.pi not found
[Fri Oct  7 05:09:35 2011] ../../acisf00123/products/spectra/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9.warf not found
[Fri Oct  7 05:09:35 2011] ../../acisf00123/products/spectra/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9.wrmf not found
[Fri Oct  7 05:09:35 2011] Removal of ../../acisf00123/products/spectra/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9.soff failed
[Fri Oct  7 05:09:35 2011] Failed to rename ../../acisf00123/products/spectra/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_grp.pi to ../../acisf00123/products/spectra/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_src.pi
[Fri Oct  7 05:09:45 2011] ../../acisf00123/products/lightcurves/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_src.lc and ../../acisf00123/products/lightcurves/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Oct  7 05:22:36 2011] 195.667
[Fri Oct  7 05:27:40 2011] Updating aperture counts using extracted products
[Fri Oct  7 05:27:40 2011] Error reading totcts from fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_src.pi
[Fri Oct  7 05:27:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 05:27:41 2011] Using photon index=1.80, rate=0.0718, arf fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9.arf
[Fri Oct  7 05:27:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 05:27:41 2011] Updating source flux to 1.3e-12
[Fri Oct  7 05:27:51 2011] Source 9 has no response, skipping
[Fri Oct  7 05:27:52 2011] acisf00123/analysis//spectral/fullrun_ccd2_acisf00123_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete