[Fri Oct  7 04:48:48 2011] Detection parameters:
  Position = (511.6, 244.7) = 16 17 28.67 -50 59 17.7
  Extent = 0.7" x 0.5", rotation angle = 61 degrees
  Source counts = 13.5 +/- 5.0
  Background counts = 11.5
  Rate = 0.001 +/- 0.0004

[Fri Oct  7 04:48:50 2011] Off-axis axis estimate = 2.38'
[Fri Oct  7 04:52:24 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 04:52:24 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Oct  7 04:52:24 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.048
[Fri Oct  7 04:52:24 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.47"
[Fri Oct  7 04:52:30 2011] fullrun_ccd1_acisf00123_pi14-548_cl_pass0_src13.ximg exists
[Fri Oct  7 04:52:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00123_pi14-548_cl_pass0_src13.csv
[Fri Oct  7 04:52:30 2011] fullrun_ccd1_acisf00123_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Oct  7 04:52:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00123_pi14-548_cl_pass0_src13.csv
[Fri Oct  7 04:52:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00123_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00123_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 04:52:32 2011] fullrun_ccd1_acisf00123_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Oct  7 04:52:32 2011] fullrun_ccd1_acisf00123_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Oct  7 04:52:32 2011] Fit fullrun_ccd1_acisf00123_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Oct  7 04:53:54 2011] Spatial fit model total counts = 207.298000, observed total counts = 208.000000
[Fri Oct  7 04:53:54 2011] Offset between fit and detection position for source 10 = 4.095790 pixels
[Fri Oct  7 04:53:54 2011] 208.689000 total counts/ 183.106000 bgd. counts: snr = 1.890602
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.095790 pixels
  Position = (513.6, 241.1) = 16 17 28.59 -50 59 19.7
  Extent = 1.2 (0.7-1.5)", rotation angle = 0
  Source counts = 25.6 +/- 14.4
  Background counts = 183.1
  Rate = 0.002 +/- 0.001
[Fri Oct  7 04:53:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 04:53:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 04:53:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 04:53:54 2011] Source does appear to be extended
[Fri Oct  7 04:53:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 04:54:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 04:54:59 2011] Initial guess for spatial extent in simple fitting = 1.25"
[Fri Oct  7 04:54:59 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.979
[Fri Oct  7 04:54:59 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 1.25"
[Fri Oct  7 04:55:00 2011] fullrun_ccd1_acisf00123_pi14-548_cl_pass1_src9.ximg exists
[Fri Oct  7 04:55:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00123_pi14-548_cl_pass1_src9.csv
[Fri Oct  7 04:55:00 2011] fullrun_ccd1_acisf00123_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Oct  7 04:55:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00123_pi14-548_cl_pass1_src9.csv
[Fri Oct  7 04:55:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00123_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00123_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 04:55:00 2011] fullrun_ccd1_acisf00123_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Oct  7 04:55:00 2011] fullrun_ccd1_acisf00123_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Oct  7 04:55:00 2011] Fit fullrun_ccd1_acisf00123_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Oct  7 04:55:27 2011] Spatial fit model total counts = 189.430000, observed total counts = 189.000000
[Fri Oct  7 04:55:27 2011] Offset between fit and detection position for source 10 = 3.849405 pixels
[Fri Oct  7 04:55:27 2011] 189.423400 total counts/ 83.279400 bgd. counts: snr = 11.631257
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 3.849405 pixels
  Position = (516.4, 238.6) = 16 17 28.44 -50 59 21.0
  Extent = 2.5 (2.5-5.0)", rotation angle = 0
  Source counts = 106.1 +/- 13.8
  Background counts = 83.3
  Rate = 0.008 +/- 0.001
[Fri Oct  7 04:55:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 04:55:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 04:55:27 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 04:55:27 2011] Source does appear to be extended
[Fri Oct  7 04:55:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:05:05 2011] Not overwriting source region fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_src.reg
[Fri Oct  7 05:05:05 2011] Extracting stamp from image fullrun_ccd1_acisf00123_pi14-548_cl_sm2.00.img.gz, (402, 125) - (630, 353)
[Fri Oct  7 05:05:05 2011] Writing fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10.gif
[Fri Oct  7 05:08:30 2011] ../../acisf00123/products/events/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_src.evt and ../../acisf00123/products/events/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct  7 05:08:30 2011] Size of ../../acisf00123/products/events/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_src.evt.gz[events] = 717 counts
[Fri Oct  7 05:08:30 2011] Mean chipx,y = (185.64, 854.87)
[Fri Oct  7 05:08:30 2011] Mean tdetx,y = (4277.13, 4292.64)
[Fri Oct  7 05:08:30 2011] chipx,y range = (151.00-222.00, 820.00-891.00)
[Fri Oct  7 05:08:30 2011] Size of ../../acisf00123/products/events/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 5353 counts
[Fri Oct  7 05:08:30 2011] ../../acisf00123/products/images/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_src.img and ../../acisf00123/products/images/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct  7 05:08:30 2011] rmf not found, will run specextract
[Fri Oct  7 05:08:37 2011] ../../acisf00123/products/spectra/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_bkg.pi not found
[Fri Oct  7 05:08:37 2011] ../../acisf00123/products/spectra/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10.warf not found
[Fri Oct  7 05:08:37 2011] ../../acisf00123/products/spectra/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10.wrmf not found
[Fri Oct  7 05:08:37 2011] Removal of ../../acisf00123/products/spectra/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10.soff failed
[Fri Oct  7 05:08:37 2011] Failed to rename ../../acisf00123/products/spectra/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_grp.pi to ../../acisf00123/products/spectra/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_src.pi
[Fri Oct  7 05:08:48 2011] ../../acisf00123/products/lightcurves/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_src.lc and ../../acisf00123/products/lightcurves/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct  7 05:09:13 2011] 193.949
[Fri Oct  7 05:27:40 2011] Updating aperture counts using extracted products
[Fri Oct  7 05:27:40 2011] Error reading totcts from fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_src.pi
[Fri Oct  7 05:27:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 05:27:40 2011] Using photon index=1.80, rate=0.00773, arf fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10.arf
[Fri Oct  7 05:27:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 05:27:40 2011] Updating source flux to 1.5e-13
[Fri Oct  7 05:27:50 2011] Source 10 has no response, skipping
[Fri Oct  7 05:27:51 2011] acisf00123/analysis//spectral/fullrun_ccd1_acisf00123_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete