[Thu Dec 22 17:48:28 2011] Detection parameters:
  Position = (988.6, 863.2) = 12 45 14.21 3 23 13.9
  Extent = 1.3" x 0.7", rotation angle = 29 degrees
  Source counts = 19.5 +/- 5.2
  Background counts = 7.5
  Rate = 0.0002 +/- 6e-05

[Thu Dec 22 17:48:28 2011] Off-axis axis estimate = 7.60'
[Thu Dec 22 19:30:01 2011] Using EEF radius (= 2.56 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 19:30:01 2011] Initial guess for spatial extent in simple fitting = 2.56"
[Thu Dec 22 19:30:01 2011] source mask rpix=5.2, npix_max = 130, mask sum = 132, frac = 1.015
[Thu Dec 22 19:30:01 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 2.56"
[Thu Dec 22 20:15:00 2011] fullrun_ccd3_acisf12288_pi14-548_cl_pass0_src27.ximg exists
[Thu Dec 22 20:15:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12288_pi14-548_cl_pass0_src27.csv
[Thu Dec 22 20:15:00 2011] fullrun_ccd3_acisf12288_pi14-548_cl_pass0_src27_1.ximg exists
[Thu Dec 22 20:15:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12288_pi14-548_cl_pass0_src27.csv
[Thu Dec 22 20:15:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12288_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12288_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 20:15:00 2011] fullrun_ccd3_acisf12288_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Thu Dec 22 20:15:00 2011] fullrun_ccd3_acisf12288_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Dec 22 20:15:00 2011] Fit fullrun_ccd3_acisf12288_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Dec 22 20:28:41 2011] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 29.243040 pixels away
[Thu Dec 22 20:28:41 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 20:28:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 20:28:41 2011] Assessing source extent using major
[Thu Dec 22 20:28:41 2011] Source does appear to be extended
[Thu Dec 22 20:28:41 2011] Computing asymmetry using major and minor axis, asym = 1.82
[Thu Dec 22 20:28:41 2011] Source is asymmetric
[Thu Dec 22 21:57:31 2011] Using EEF radius (= 2.56 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 21:57:31 2011] Initial guess for spatial extent in simple fitting = 2.56"
[Thu Dec 22 21:57:31 2011] source mask rpix=5.2, npix_max = 130, mask sum = 132, frac = 1.015
[Thu Dec 22 21:57:31 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 2.56"
[Thu Dec 22 22:40:44 2011] fullrun_ccd3_acisf12288_pi14-548_cl_pass1_src27.ximg exists
[Thu Dec 22 22:40:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12288_pi14-548_cl_pass1_src27.csv
[Thu Dec 22 22:40:44 2011] fullrun_ccd3_acisf12288_pi14-548_cl_pass1_src27_1.ximg exists
[Thu Dec 22 22:40:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12288_pi14-548_cl_pass1_src27.csv
[Thu Dec 22 22:40:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12288_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12288_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 22:40:44 2011] fullrun_ccd3_acisf12288_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Thu Dec 22 22:40:44 2011] fullrun_ccd3_acisf12288_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Dec 22 22:40:44 2011] Fit fullrun_ccd3_acisf12288_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Dec 22 22:54:42 2011] Spatial fit model total counts = 48.544900, observed total counts = 49.000000
[Thu Dec 22 22:54:42 2011] Offset between fit and detection position for source 43 = 1.620611 pixels
[Thu Dec 22 22:54:42 2011] 48.123400 total counts/ 37.492500 bgd. counts: snr = 1.736192
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 1.620611 pixels
  Position = (987.0, 862.6) = 12 45 14.28 3 23 13.4
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 10.6 +/- 6.9
  Background counts = 37.5
  Rate = 0.0001 +/- 8e-05
[Thu Dec 22 22:54:42 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 22:54:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 22:54:42 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 22:54:42 2011] Source does appear to be extended
[Thu Dec 22 22:54:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 23:43:10 2011] Writing source region out to fullrun_ccd3_acisf12288_pi14-548_pass1_cl_src43_src.reg
[Thu Dec 22 23:43:10 2011] Extracting stamp from image fullrun_ccd3_acisf12288_pi14-548_cl_sm2.00.img.gz, (948, 824) - (1026, 902)
[Thu Dec 22 23:43:10 2011] Writing fullrun_ccd3_acisf12288_pi14-548_pass1_cl_src43.gif
[Thu Dec 22 23:58:53 2011] Size of ../../acisf12288/products/events/fullrun_ccd3_acisf12288_pi14-548_pass1_cl_src43_src.evt.gz[events] = 17 counts
[Thu Dec 22 23:58:53 2011] Mean chipx,y = (158.76, 527.29)
[Thu Dec 22 23:58:53 2011] Mean tdetx,y = (4604.71, 3219.76)
[Thu Dec 22 23:58:53 2011] chipx,y range = (146.00-178.00, 512.00-545.00)
[Thu Dec 22 23:58:53 2011] Size of ../../acisf12288/products/events/fullrun_ccd3_acisf12288_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 42 counts
[Thu Dec 22 23:58:54 2011] Not generating rmf since there are only 10 counts
[Thu Dec 22 23:58:54 2011] arf not found, will run specextract
[Thu Dec 22 23:59:23 2011] ../../acisf12288/products/spectra/fullrun_ccd3_acisf12288_pi14-548_pass1_cl_src43.warf not found
[Thu Dec 22 23:59:23 2011] ../../acisf12288/products/spectra/fullrun_ccd3_acisf12288_pi14-548_pass1_cl_src43.wrmf not found
[Thu Dec 22 23:59:23 2011] Removal of ../../acisf12288/products/spectra/fullrun_ccd3_acisf12288_pi14-548_pass1_cl_src43.soff failed
[Fri Dec 23 00:08:09 2011] Spectrum 43 has only 11 counts, deleting rmf
[Fri Dec 23 00:08:09 2011] 163.021
[Fri Dec 23 00:09:00 2011] Updating aperture counts using extracted products
[Fri Dec 23 00:09:00 2011] Error reading totcts from fullrun_ccd3_acisf12288_pi14-548_pass1_cl_src43_src.pi.gz
[Fri Dec 23 00:09:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 00:09:00 2011] Using photon index=1.80, rate=0.000117, arf fullrun_ccd3_acisf12288_pi14-548_pass1_cl_src43.arf
[Fri Dec 23 00:09:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Dec 23 00:09:00 2011] Updating source flux to 1.7e-15
[Fri Dec 23 00:09:26 2011] Source 43 has fewer than 100.000000 counts, skipping spectral fitting