[Thu Jan 12 19:43:35 2012] Detection parameters:
  Position = (938.6, 986.6) = 8 30 55.19 65 49 4.9
  Extent = 0.8" x 0.6", rotation angle = 8 degrees
  Source counts = 23.6 +/- 5.4
  Background counts = 5.4
  Rate = 0.0005 +/- 0.0001

[Thu Jan 12 19:43:35 2012] Off-axis axis estimate = 2.00'
[Thu Jan 12 21:08:46 2012] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Thu Jan 12 21:08:46 2012] Initial guess for spatial extent in simple fitting = 0.43"
[Thu Jan 12 21:08:46 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.191
[Thu Jan 12 21:08:46 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 0.43"
[Thu Jan 12 21:27:15 2012] fullrun_ccd3_acisf12286_pi14-548_cl_pass0_src9.ximg exists
[Thu Jan 12 21:27:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12286_pi14-548_cl_pass0_src9.csv
[Thu Jan 12 21:27:15 2012] fullrun_ccd3_acisf12286_pi14-548_cl_pass0_src9_1.ximg exists
[Thu Jan 12 21:27:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12286_pi14-548_cl_pass0_src9.csv
[Thu Jan 12 21:27:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12286_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12286_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 12 21:27:15 2012] fullrun_ccd3_acisf12286_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Thu Jan 12 21:27:15 2012] fullrun_ccd3_acisf12286_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jan 12 21:27:15 2012] Fit fullrun_ccd3_acisf12286_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jan 12 21:59:21 2012] Spatial fit model total counts = 37.999600, observed total counts = 38.000000
[Thu Jan 12 21:59:21 2012] Offset between fit and detection position for source 8 = 0.211243 pixels
[Thu Jan 12 21:59:21 2012] 37.831800 total counts/ 17.059600 bgd. counts: snr = 5.029190
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.211243 pixels
  Position = (938.8, 986.6) = 8 30 55.21 65 49 4.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 20.8 +/- 6.2
  Background counts = 17.1
  Rate = 0.0004 +/- 0.0001
[Thu Jan 12 21:59:21 2012] Vigneting correction estimate = 1.000000
[Thu Jan 12 21:59:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 12 21:59:21 2012] Assessing source extent using major axis lower bound
[Thu Jan 12 21:59:21 2012] Source does appear to be extended
[Thu Jan 12 21:59:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 12 23:17:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 12 23:17:09 2012] Initial guess for spatial extent in simple fitting = 0.52"
[Thu Jan 12 23:17:09 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.936
[Thu Jan 12 23:17:09 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 0.52"
[Thu Jan 12 23:30:42 2012] fullrun_ccd3_acisf12286_pi14-548_cl_pass1_src9.ximg exists
[Thu Jan 12 23:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12286_pi14-548_cl_pass1_src9.csv
[Thu Jan 12 23:30:42 2012] fullrun_ccd3_acisf12286_pi14-548_cl_pass1_src9_1.ximg exists
[Thu Jan 12 23:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12286_pi14-548_cl_pass1_src9.csv
[Thu Jan 12 23:30:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12286_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12286_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 12 23:30:42 2012] fullrun_ccd3_acisf12286_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Thu Jan 12 23:30:42 2012] fullrun_ccd3_acisf12286_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jan 12 23:30:42 2012] Fit fullrun_ccd3_acisf12286_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jan 13 00:00:18 2012] Spatial fit model total counts = 37.999700, observed total counts = 38.000000
[Fri Jan 13 00:00:18 2012] Offset between fit and detection position for source 8 = 0.002963 pixels
[Fri Jan 13 00:00:18 2012] 37.831300 total counts/ 17.022500 bgd. counts: snr = 5.043539
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.002963 pixels
  Position = (938.8, 986.6) = 8 30 55.21 65 49 4.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 20.8 +/- 6.2
  Background counts = 17.0
  Rate = 0.0004 +/- 0.0001
[Fri Jan 13 00:00:18 2012] Vigneting correction estimate = 1.000000
[Fri Jan 13 00:00:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 13 00:00:18 2012] Assessing source extent using major axis lower bound
[Fri Jan 13 00:00:18 2012] Source does appear to be extended
[Fri Jan 13 00:00:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 13 00:28:50 2012] Writing source region out to fullrun_ccd3_acisf12286_pi14-548_pass1_cl_src8_src.reg
[Fri Jan 13 00:28:50 2012] Extracting stamp from image fullrun_ccd3_acisf12286_pi14-548_cl_sm2.00.img.gz, (915, 963) - (963, 1010)
[Fri Jan 13 00:28:50 2012] Writing fullrun_ccd3_acisf12286_pi14-548_pass1_cl_src8.gif
[Fri Jan 13 00:33:36 2012] Size of ../../acisf12286/products/events/fullrun_ccd3_acisf12286_pi14-548_pass1_cl_src8_src.evt.gz[events] = 23 counts
[Fri Jan 13 00:33:36 2012] Mean chipx,y = (699.65, 874.22)
[Fri Jan 13 00:33:36 2012] Mean tdetx,y = (4257.78, 3760.65)
[Fri Jan 13 00:33:36 2012] chipx,y range = (682.00-717.00, 861.00-893.00)
[Fri Jan 13 00:33:36 2012] Size of ../../acisf12286/products/events/fullrun_ccd3_acisf12286_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 38 counts
[Fri Jan 13 00:33:37 2012] Not generating rmf since there are only 20 counts
[Fri Jan 13 00:33:37 2012] arf not found, will run specextract
[Fri Jan 13 00:34:04 2012] ../../acisf12286/products/spectra/fullrun_ccd3_acisf12286_pi14-548_pass1_cl_src8.warf not found
[Fri Jan 13 00:34:04 2012] ../../acisf12286/products/spectra/fullrun_ccd3_acisf12286_pi14-548_pass1_cl_src8.wrmf not found
[Fri Jan 13 00:34:04 2012] Removal of ../../acisf12286/products/spectra/fullrun_ccd3_acisf12286_pi14-548_pass1_cl_src8.soff failed
[Fri Jan 13 00:35:27 2012] Spectrum 8 has only 21 counts, deleting rmf
[Fri Jan 13 00:35:27 2012] 197.914
[Fri Jan 13 00:36:56 2012] Updating aperture counts using extracted products
[Fri Jan 13 00:36:56 2012] Error reading totcts from fullrun_ccd3_acisf12286_pi14-548_pass1_cl_src8_src.pi.gz
[Fri Jan 13 00:36:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 13 00:36:56 2012] Using photon index=1.80, rate=0.000442, arf fullrun_ccd3_acisf12286_pi14-548_pass1_cl_src8.arf
[Fri Jan 13 00:36:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jan 13 00:36:56 2012] Updating source flux to 5.2e-15
[Fri Jan 13 00:37:13 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jan 13 00:37:14 2012] acisf12286/analysis//spectral/fullrun_ccd3_acisf12286_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete