[Thu Jan 12 19:41:55 2012] Detection parameters:
  Position = (724.3, 887.4) = 8 30 27.77 65 59 25.1
  Extent = 3.7" x 2.3", rotation angle = 141 degrees
  Source counts = 93.7 +/- 11.0
  Background counts = 28.3
  Rate = 0.002 +/- 0.0002

[Thu Jan 12 19:41:55 2012] Off-axis axis estimate = 8.71'
[Thu Jan 12 19:47:27 2012] Using EEF radius (= 3.35 ")to estimate initial spatial extent for simple fitting
[Thu Jan 12 19:47:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 12 19:47:27 2012] Initial guess for spatial extent in simple fitting = 3.35"
[Thu Jan 12 19:47:27 2012] source mask rpix=6.8, npix_max = 213, mask sum = 225, frac = 1.052
[Thu Jan 12 19:47:27 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 3.35"
[Thu Jan 12 20:18:20 2012] fullrun_ccd0_acisf12286_pi14-548_cl_pass0_src5.ximg exists
[Thu Jan 12 20:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12286_pi14-548_cl_pass0_src5.csv
[Thu Jan 12 20:18:20 2012] fullrun_ccd0_acisf12286_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Jan 12 20:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12286_pi14-548_cl_pass0_src5.csv
[Thu Jan 12 20:18:20 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12286_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12286_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 12 20:18:20 2012] fullrun_ccd0_acisf12286_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Jan 12 20:18:20 2012] fullrun_ccd0_acisf12286_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jan 12 20:18:20 2012] Fit fullrun_ccd0_acisf12286_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jan 12 21:59:14 2012] Spatial fit model total counts = 116.138000, observed total counts = 117.000000
[Thu Jan 12 21:59:14 2012] Offset between fit and detection position for source 5 = 1.457617 pixels
[Thu Jan 12 21:59:14 2012] 117.101500 total counts/ 16.603500 bgd. counts: snr = 24.663664
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.457617 pixels
  Position = (723.0, 888.1) = 8 30 27.91 65 59 25.2
  Extent = 3.1 (2.6-3.6)", rotation angle = 0
  Source counts = 100.5 +/- 10.8
  Background counts = 16.6
  Rate = 0.002 +/- 0.0002
[Thu Jan 12 21:59:14 2012] Vigneting correction estimate = 1.000000
[Thu Jan 12 21:59:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 12 21:59:14 2012] Assessing source extent using major axis lower bound
[Thu Jan 12 21:59:14 2012] Source does appear to be extended
[Thu Jan 12 21:59:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 12 21:59:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 12 21:59:39 2012] Initial guess for spatial extent in simple fitting = 3.09"
[Thu Jan 12 21:59:39 2012] source mask rpix=6.3, npix_max = 184, mask sum = 196, frac = 1.064
[Thu Jan 12 21:59:39 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 3.09"
[Thu Jan 12 22:32:25 2012] fullrun_ccd0_acisf12286_pi14-548_cl_pass1_src5.ximg exists
[Thu Jan 12 22:32:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12286_pi14-548_cl_pass1_src5.csv
[Thu Jan 12 22:32:25 2012] fullrun_ccd0_acisf12286_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Jan 12 22:32:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12286_pi14-548_cl_pass1_src5.csv
[Thu Jan 12 22:32:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12286_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12286_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 12 22:32:25 2012] fullrun_ccd0_acisf12286_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Jan 12 22:32:25 2012] fullrun_ccd0_acisf12286_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jan 12 22:32:25 2012] Fit fullrun_ccd0_acisf12286_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jan 13 00:00:13 2012] Spatial fit model total counts = 113.109000, observed total counts = 113.000000
[Fri Jan 13 00:00:13 2012] Offset between fit and detection position for source 5 = 0.878502 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.878502 pixels
  Position = (723.8, 887.8) = 8 30 27.84 65 59 25.1
  Extent = 3.3 (2.8-3.8)", rotation angle = 0
  Source counts = 113.4 +/- 10.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Fri Jan 13 00:00:13 2012] Vigneting correction estimate = 1.000000
[Fri Jan 13 00:00:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 13 00:00:13 2012] Assessing source extent using major axis lower bound
[Fri Jan 13 00:00:13 2012] Source does appear to be extended
[Fri Jan 13 00:00:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 13 00:00:36 2012] Writing source region out to fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5_src.reg
[Fri Jan 13 00:00:36 2012] Extracting stamp from image fullrun_ccd0_acisf12286_pi14-548_cl_sm2.00.img.gz, (572, 736) - (875, 1039)
[Fri Jan 13 00:00:36 2012] Writing fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5.gif
[Fri Jan 13 00:02:52 2012] Size of ../../acisf12286/products/events/fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5_src.evt.gz[events] = 127 counts
[Fri Jan 13 00:02:52 2012] Mean chipx,y = (337.98, 386.20)
[Fri Jan 13 00:02:52 2012] Mean tdetx,y = (3447.20, 4794.02)
[Fri Jan 13 00:02:52 2012] chipx,y range = (308.00-376.00, 345.00-425.00)
[Fri Jan 13 00:02:52 2012] Size of ../../acisf12286/products/events/fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 369 counts
[Fri Jan 13 00:02:53 2012] rmf not found, will run specextract
[Fri Jan 13 00:02:53 2012] arf not found, will run specextract
[Fri Jan 13 00:03:14 2012] ../../acisf12286/products/spectra/fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5.warf not found
[Fri Jan 13 00:03:14 2012] ../../acisf12286/products/spectra/fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5.wrmf not found
[Fri Jan 13 00:03:14 2012] Removal of ../../acisf12286/products/spectra/fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5.soff failed
[Fri Jan 13 00:11:26 2012] Keeping rmf generated by specextract
[Fri Jan 13 00:11:26 2012] 167.165
[Fri Jan 13 00:36:55 2012] Updating aperture counts using extracted products
[Fri Jan 13 00:36:55 2012] Error reading totcts from fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Jan 13 00:36:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 13 00:36:55 2012] Using photon index=1.80, rate=0.00241, arf fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5.arf
[Fri Jan 13 00:36:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jan 13 00:36:55 2012] Updating source flux to 3.3e-14
[Fri Jan 13 00:37:06 2012] Reading fit data from acisf12286/analysis//spectral/fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5_pl.csv
[Fri Jan 13 00:37:06 2012] Spectral fit parameter nH value = 1.32892e+17
[Fri Jan 13 00:37:06 2012] Spectral fit parameter PhoIndex value = 1.96333
[Fri Jan 13 00:37:06 2012] Failed to get F(0.3-8.0) from acisf12286/analysis//spectral/fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Fri Jan 13 00:37:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 13 00:37:06 2012] Using Nh = 1.3e+17, photon index=1.96, rate=0.00241, arf fullrun_ccd0_acisf12286_pi14-548_pass1_cl_src5.arf
[Fri Jan 13 00:37:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jan 13 00:37:06 2012] Updating source flux to 3.5e-14