[Sat Feb 18 00:57:57 2012] Detection parameters:
  Position = (53.6, 526.1) = 10 17 24.95 -10 40 59.1
  Extent = 0.5" x 0.5", rotation angle = 35 degrees
  Source counts = 114.5 +/- 11.0
  Background counts = 6.5
  Rate = 0.01 +/- 0.001

[Sat Feb 18 00:57:57 2012] Off-axis axis estimate = 0.49'
[Sat Feb 18 01:13:26 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 01:13:26 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Feb 18 01:13:26 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.890
[Sat Feb 18 01:13:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Sat Feb 18 01:22:51 2012] fullrun_ccd3_acisf12285_pi14-548_cl_pass0_src1.ximg exists
[Sat Feb 18 01:22:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12285_pi14-548_cl_pass0_src1.csv
[Sat Feb 18 01:22:51 2012] fullrun_ccd3_acisf12285_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Feb 18 01:22:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12285_pi14-548_cl_pass0_src1.csv
[Sat Feb 18 01:22:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12285_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12285_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 01:22:51 2012] fullrun_ccd3_acisf12285_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Feb 18 01:22:51 2012] fullrun_ccd3_acisf12285_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Feb 18 01:22:51 2012] Fit fullrun_ccd3_acisf12285_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Feb 18 01:22:55 2012] Spatial fit model total counts = 130.615000, observed total counts = 131.000000
[Sat Feb 18 01:22:55 2012] Offset between fit and detection position for source 2 = 0.709324 pixels
[Sat Feb 18 01:22:55 2012] 128.345700 total counts/ 21.591700 bgd. counts: snr = 22.974218
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.709324 pixels
  Position = (54.2, 526.6) = 10 17 24.95 -10 40 59.1
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 106.8 +/- 11.3
  Background counts = 21.6
  Rate = 0.01 +/- 0.001
[Sat Feb 18 01:22:55 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 01:22:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 01:22:55 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 01:22:55 2012] Source does appear to be extended
[Sat Feb 18 01:22:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 01:35:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 01:35:17 2012] Initial guess for spatial extent in simple fitting = 0.37"
[Sat Feb 18 01:35:17 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.956
[Sat Feb 18 01:35:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.37"
[Sat Feb 18 01:41:23 2012] fullrun_ccd3_acisf12285_pi14-548_cl_pass1_src1.ximg exists
[Sat Feb 18 01:41:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12285_pi14-548_cl_pass1_src1.csv
[Sat Feb 18 01:41:23 2012] fullrun_ccd3_acisf12285_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Feb 18 01:41:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12285_pi14-548_cl_pass1_src1.csv
[Sat Feb 18 01:41:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12285_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12285_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 01:41:23 2012] fullrun_ccd3_acisf12285_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Feb 18 01:41:23 2012] fullrun_ccd3_acisf12285_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Feb 18 01:41:23 2012] Fit fullrun_ccd3_acisf12285_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Feb 18 01:41:27 2012] Spatial fit model total counts = 126.592000, observed total counts = 127.000000
[Sat Feb 18 01:41:27 2012] Offset between fit and detection position for source 2 = 0.002244 pixels
[Sat Feb 18 01:41:27 2012] 124.496800 total counts/ 17.467800 bgd. counts: snr = 25.608395
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002244 pixels
  Position = (54.2, 526.6) = 10 17 24.95 -10 40 59.1
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 107.0 +/- 11.2
  Background counts = 17.5
  Rate = 0.01 +/- 0.001
[Sat Feb 18 01:41:27 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 01:41:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 01:41:27 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 01:41:27 2012] Source does appear to be extended
[Sat Feb 18 01:41:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 01:51:40 2012] Writing source region out to fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2_src.reg
[Sat Feb 18 01:51:40 2012] Extracting stamp from image fullrun_ccd3_acisf12285_pi14-548_cl_sm2.00.img.gz, (37, 510) - (71, 544)
[Sat Feb 18 01:51:40 2012] Writing fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2.gif
[Sat Feb 18 01:51:42 2012] Size of ../../acisf12285/products/events/fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2_src.evt.gz[events] = 110 counts
[Sat Feb 18 01:51:42 2012] Mean chipx,y = (995.50, 989.32)
[Sat Feb 18 01:51:42 2012] Mean tdetx,y = (4142.68, 4056.50)
[Sat Feb 18 01:51:42 2012] chipx,y range = (980.00-1013.00, 971.00-1005.00)
[Sat Feb 18 01:51:42 2012] Size of ../../acisf12285/products/events/fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 23 counts
[Sat Feb 18 01:51:43 2012] rmf not found, will run specextract
[Sat Feb 18 01:51:43 2012] arf not found, will run specextract
[Sat Feb 18 01:52:12 2012] ../../acisf12285/products/spectra/fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2.warf not found
[Sat Feb 18 01:52:12 2012] ../../acisf12285/products/spectra/fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2.wrmf not found
[Sat Feb 18 01:52:12 2012] Removal of ../../acisf12285/products/spectra/fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2.soff failed
[Sat Feb 18 01:56:13 2012] Keeping rmf generated by specextract
[Sat Feb 18 01:56:13 2012] 202.92
[Sat Feb 18 01:56:15 2012] Updating aperture counts using extracted products
[Sat Feb 18 01:56:15 2012] Error reading totcts from fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Feb 18 01:56:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 01:56:16 2012] Using photon index=1.80, rate=0.0108, arf fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2.arf
[Sat Feb 18 01:56:16 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 18 01:56:16 2012] Updating source flux to 1.2e-13
[Sat Feb 18 01:56:23 2012] Reading fit data from acisf12285/analysis//spectral/fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2_pl.csv
[Sat Feb 18 01:56:23 2012] Spectral fit parameter nH value = 1.02924e+14
[Sat Feb 18 01:56:23 2012] Spectral fit parameter PhoIndex value = 1.71171
[Sat Feb 18 01:56:23 2012] Failed to get F(0.3-8.0) from acisf12285/analysis//spectral/fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Feb 18 01:56:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 01:56:23 2012] Using Nh = 1e+14, photon index=1.71, rate=0.0108, arf fullrun_ccd3_acisf12285_pi14-548_pass1_cl_src2.arf
[Sat Feb 18 01:56:23 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 18 01:56:23 2012] Updating source flux to 1.3e-13