[Thu Feb 23 05:04:11 2012] Detection parameters:
  Position = (647.6, 312.6) = 17 9 36.81 34 27 22.7
  Extent = 0.5" x 0.5", rotation angle = 161 degrees
  Source counts = 14.2 +/- 3.9
  Background counts = 0.8
  Rate = 0.001 +/- 0.0004

[Thu Feb 23 05:04:11 2012] Off-axis axis estimate = 2.54'
[Thu Feb 23 05:27:38 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 05:27:38 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Thu Feb 23 05:27:38 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.982
[Thu Feb 23 05:27:38 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.50"
[Thu Feb 23 05:37:40 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src6.ximg exists
[Thu Feb 23 05:37:40 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src6.csv
[Thu Feb 23 05:37:40 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src6_1.ximg exists
[Thu Feb 23 05:37:40 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src6.csv
[Thu Feb 23 05:37:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 05:37:40 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Thu Feb 23 05:37:40 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Feb 23 05:37:40 2012] Fit fullrun_ccd3_acisf12284_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Feb 23 05:37:45 2012] Spatial fit model total counts = 16.129300, observed total counts = 17.000000
[Thu Feb 23 05:37:45 2012] Offset between fit and detection position for source 9 = 0.685028 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.685028 pixels
  Position = (648.1, 313.1) = 17 9 36.81 34 27 22.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 16.2 +/- 4.0
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Thu Feb 23 05:37:45 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 05:37:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 05:37:45 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 05:37:45 2012] Source does appear to be extended
[Thu Feb 23 05:37:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 05:51:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 05:51:27 2012] Initial guess for spatial extent in simple fitting = 0.37"
[Thu Feb 23 05:51:27 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.628
[Thu Feb 23 05:51:27 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.37"
[Thu Feb 23 06:01:37 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src6.ximg exists
[Thu Feb 23 06:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src6.csv
[Thu Feb 23 06:01:37 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src6_1.ximg exists
[Thu Feb 23 06:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src6.csv
[Thu Feb 23 06:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 06:01:37 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Thu Feb 23 06:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12284_pi14-548_cl_pass1_tfrozen_src6.csv
[Thu Feb 23 06:01:37 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Feb 23 06:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12284_pi14-548_cl_pass1_tfrozen_src6.csv
[Thu Feb 23 06:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12284_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12284_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 06:01:41 2012] Spatial fit model total counts = 15.933800, observed total counts = 17.000000
[Thu Feb 23 06:01:41 2012] Offset between fit and detection position for source 9 = 0.012024 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.012024 pixels
  Position = (648.1, 313.1) = 17 9 36.81 34 27 22.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 15.9 +/- 4.0
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Thu Feb 23 06:01:41 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:01:41 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:01:41 2012] Source does appear to be extended
[Thu Feb 23 06:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 06:11:01 2012] Writing source region out to fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src9_src.reg
[Thu Feb 23 06:11:01 2012] Extracting stamp from image fullrun_ccd3_acisf12284_pi14-548_cl_sm2.00.img.gz, (632, 297) - (664, 329)
[Thu Feb 23 06:11:01 2012] Writing fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src9.gif
[Thu Feb 23 06:14:09 2012] Size of ../../acisf12284/products/events/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src9_src.evt.gz[events] = 16 counts
[Thu Feb 23 06:14:09 2012] Mean chipx,y = (819.44, 749.25)
[Thu Feb 23 06:14:09 2012] Mean tdetx,y = (4382.75, 3880.44)
[Thu Feb 23 06:14:09 2012] chipx,y range = (806.00-839.00, 736.00-763.00)
[Thu Feb 23 06:14:09 2012] Size of ../../acisf12284/products/events/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 4 counts
[Thu Feb 23 06:14:10 2012] Not generating rmf since there are only 15 counts
[Thu Feb 23 06:14:10 2012] arf not found, will run specextract
[Thu Feb 23 06:14:36 2012] ../../acisf12284/products/spectra/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src9.warf not found
[Thu Feb 23 06:14:36 2012] ../../acisf12284/products/spectra/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src9.wrmf not found
[Thu Feb 23 06:14:36 2012] Removal of ../../acisf12284/products/spectra/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src9.soff failed
[Thu Feb 23 06:14:43 2012] Spectrum 9 has only 16 counts, deleting rmf
[Thu Feb 23 06:14:43 2012] 198.699
[Thu Feb 23 06:14:45 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:14:45 2012] Error reading totcts from fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src9_src.pi.gz
[Thu Feb 23 06:14:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:14:45 2012] Using photon index=1.80, rate=0.0016, arf fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src9.arf
[Thu Feb 23 06:14:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 06:14:45 2012] Updating source flux to 1.9e-14
[Thu Feb 23 06:14:51 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting