[Thu Feb 23 05:04:11 2012] Detection parameters:
  Position = (782.5, 1019.6) = 17 9 31.44 34 33 10.5
  Extent = 2.7" x 1.5", rotation angle = 174 degrees
  Source counts = 780.9 +/- 28.7
  Background counts = 43.1
  Rate = 0.08 +/- 0.003

[Thu Feb 23 05:04:11 2012] Off-axis axis estimate = 8.28'
[Thu Feb 23 05:27:38 2012] Using EEF radius (= 3.03 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 05:27:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 05:27:38 2012] Initial guess for spatial extent in simple fitting = 3.03"
[Thu Feb 23 05:27:38 2012] source mask rpix=6.2, npix_max = 177, mask sum = 169, frac = 0.953
[Thu Feb 23 05:27:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.03"
[Thu Feb 23 05:37:40 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src1.ximg exists
[Thu Feb 23 05:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src1.csv
[Thu Feb 23 05:37:40 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Feb 23 05:37:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src1.csv
[Thu Feb 23 05:37:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12284_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 05:37:40 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 23 05:37:40 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 23 05:37:40 2012] Fit fullrun_ccd3_acisf12284_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 23 05:37:45 2012] Spatial fit model total counts = 848.649000, observed total counts = 845.000000
[Thu Feb 23 05:37:45 2012] Offset between fit and detection position for source 2 = 0.730142 pixels
[Thu Feb 23 05:37:45 2012] 848.276300 total counts/ 54.522300 bgd. counts: snr = 107.497618
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.730142 pixels
  Position = (782.8, 1020.3) = 17 9 31.44 34 33 10.6
  Extent = 2.5 (2.4-2.7)", rotation angle = 0
  Source counts = 793.8 +/- 29.1
  Background counts = 54.5
  Rate = 0.08 +/- 0.003
[Thu Feb 23 05:37:45 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 05:37:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 05:37:45 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 05:37:45 2012] Source does appear to be extended
[Thu Feb 23 05:37:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 05:51:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 05:51:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 05:51:27 2012] Initial guess for spatial extent in simple fitting = 2.52"
[Thu Feb 23 05:51:27 2012] source mask rpix=5.1, npix_max = 126, mask sum = 121, frac = 0.956
[Thu Feb 23 05:51:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.52"
[Thu Feb 23 06:01:37 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src1.ximg exists
[Thu Feb 23 06:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src1.csv
[Thu Feb 23 06:01:37 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Feb 23 06:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src1.csv
[Thu Feb 23 06:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12284_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 06:01:37 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 23 06:01:37 2012] fullrun_ccd3_acisf12284_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 23 06:01:37 2012] Fit fullrun_ccd3_acisf12284_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 23 06:01:41 2012] Spatial fit model total counts = 838.990000, observed total counts = 839.000000
[Thu Feb 23 06:01:41 2012] Offset between fit and detection position for source 2 = 0.048628 pixels
[Thu Feb 23 06:01:41 2012] 838.185000 total counts/ 110.825000 bgd. counts: snr = 69.092442
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.048628 pixels
  Position = (782.8, 1020.3) = 17 9 31.44 34 33 10.6
  Extent = 2.2 (2.0-2.4)", rotation angle = 0
  Source counts = 727.4 +/- 29.0
  Background counts = 110.8
  Rate = 0.07 +/- 0.003
[Thu Feb 23 06:01:41 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:01:41 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:01:41 2012] Source does appear to be extended
[Thu Feb 23 06:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 06:11:01 2012] Writing source region out to fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2_src.reg
[Thu Feb 23 06:11:01 2012] Extracting stamp from image fullrun_ccd3_acisf12284_pi14-548_cl_sm2.00.img.gz, (680, 918) - (886, 1123)
[Thu Feb 23 06:11:01 2012] Writing fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2.gif
[Thu Feb 23 06:11:04 2012] Size of ../../acisf12284/products/events/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2_src.evt.gz[events] = 825 counts
[Thu Feb 23 06:11:04 2012] Mean chipx,y = (287.05, 263.99)
[Thu Feb 23 06:11:04 2012] Mean tdetx,y = (4868.01, 3348.05)
[Thu Feb 23 06:11:04 2012] chipx,y range = (259.00-321.00, 234.00-297.00)
[Thu Feb 23 06:11:04 2012] Size of ../../acisf12284/products/events/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 57 counts
[Thu Feb 23 06:11:06 2012] rmf not found, will run specextract
[Thu Feb 23 06:11:06 2012] arf not found, will run specextract
[Thu Feb 23 06:11:31 2012] ../../acisf12284/products/spectra/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2.warf not found
[Thu Feb 23 06:11:31 2012] ../../acisf12284/products/spectra/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2.wrmf not found
[Thu Feb 23 06:11:31 2012] Removal of ../../acisf12284/products/spectra/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2.soff failed
[Thu Feb 23 06:14:43 2012] Keeping rmf generated by specextract
[Thu Feb 23 06:14:43 2012] 166.861
[Thu Feb 23 06:14:45 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:14:45 2012] Error reading totcts from fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Feb 23 06:14:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:14:45 2012] Using photon index=1.80, rate=0.0733, arf fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2.arf
[Thu Feb 23 06:14:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 06:14:45 2012] Updating source flux to 1.1e-12
[Thu Feb 23 06:14:55 2012] Reading fit data from acisf12284/analysis//spectral/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2_pl.csv
[Thu Feb 23 06:14:55 2012] Spectral fit parameter nH value = 3.86764e+13
[Thu Feb 23 06:14:55 2012] Spectral fit parameter PhoIndex value = 1.6489
[Thu Feb 23 06:14:55 2012] Failed to get F(0.3-8.0) from acisf12284/analysis//spectral/fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Feb 23 06:14:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:14:55 2012] Using Nh = 3.9e+13, photon index=1.65, rate=0.0733, arf fullrun_ccd3_acisf12284_pi14-548_pass1_cl_src2.arf
[Thu Feb 23 06:14:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 06:14:55 2012] Updating source flux to 1.1e-12