[Mon May 13 09:13:41 2013] Detection parameters:
  Position = (649.4, 294.0) = 5 48 24.19 -25 25 52.8
  Extent = 0.8" x 0.6", rotation angle = 118 degrees
  Source counts = 23.3 +/- 4.9
  Background counts = 0.7
  Rate = 0.002 +/- 0.0005

[Mon May 13 09:13:42 2013] Off-axis axis estimate = 3.90'
[Mon May 13 09:31:19 2013] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Mon May 13 09:31:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 09:31:19 2013] Initial guess for spatial extent in simple fitting = 0.80"
[Mon May 13 09:31:19 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.107
[Mon May 13 09:31:19 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 0.80"
[Mon May 13 09:38:46 2013] fullrun_ccd2_acisf12273_pi14-548_cl_pass0_src3.ximg exists
[Mon May 13 09:38:46 2013] fullrun_ccd2_acisf12273_pi14-548_cl_pass0_src3_1.ximg exists
[Mon May 13 09:38:46 2013] Fit fullrun_ccd2_acisf12273_pi14-548_cl_pass0_src3 appears to have run properly
[Mon May 13 09:38:46 2013] fullrun_ccd2_acisf12273_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon May 13 09:38:46 2013] fullrun_ccd2_acisf12273_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 13 09:38:46 2013] Fit fullrun_ccd2_acisf12273_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 13 10:01:38 2013] Spatial fit model total counts = 23.407000, observed total counts = 24.000000
[Mon May 13 10:01:38 2013] Offset between fit and detection position for source 2 = 0.861368 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.861368 pixels
  Position = (649.7, 294.8) = 5 48 24.20 -25 25 52.6
  Extent = 0.9 (0.6-1.0)", rotation angle = 0
  Source counts = 23.3 +/- 4.8
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Mon May 13 10:01:38 2013] Vigneting correction estimate = 1.000000
[Mon May 13 10:01:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 10:01:38 2013] Assessing source extent using major axis lower bound
[Mon May 13 10:01:38 2013] Source does appear to be extended
[Mon May 13 10:01:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 10:17:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 10:17:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 10:17:12 2013] Initial guess for spatial extent in simple fitting = 0.85"
[Mon May 13 10:17:12 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.799
[Mon May 13 10:17:12 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 0.85"
[Mon May 13 10:23:23 2013] fullrun_ccd2_acisf12273_pi14-548_cl_pass1_src3.ximg exists
[Mon May 13 10:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12273_pi14-548_cl_pass1_src3.csv
[Mon May 13 10:23:23 2013] fullrun_ccd2_acisf12273_pi14-548_cl_pass1_src3_1.ximg exists
[Mon May 13 10:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12273_pi14-548_cl_pass1_src3.csv
[Mon May 13 10:23:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12273_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12273_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 10:23:23 2013] fullrun_ccd2_acisf12273_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon May 13 10:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12273_pi14-548_cl_pass1_tfrozen_src3.csv
[Mon May 13 10:23:23 2013] fullrun_ccd2_acisf12273_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 13 10:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12273_pi14-548_cl_pass1_tfrozen_src3.csv
[Mon May 13 10:23:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12273_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12273_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 10:43:34 2013] Spatial fit model total counts = 21.710900, observed total counts = 24.000000
[Mon May 13 10:43:34 2013] Offset between fit and detection position for source 2 = 0.052942 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.052942 pixels
  Position = (649.8, 294.9) = 5 48 24.19 -25 25 52.6
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 21.5 +/- 4.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Mon May 13 10:43:34 2013] Vigneting correction estimate = 1.000000
[Mon May 13 10:43:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 10:43:34 2013] Assessing source extent using major axis lower bound
[Mon May 13 10:43:34 2013] Source does appear to be extended
[Mon May 13 10:43:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 10:51:06 2013] Writing source region out to fullrun_ccd2_acisf12273_pi14-548_pass1_cl_src2_src.reg
[Mon May 13 10:51:06 2013] Extracting stamp from image fullrun_ccd2_acisf12273_pi14-548_cl_sm2.00.img.gz, (611, 256) - (689, 334)
[Mon May 13 10:51:06 2013] Writing fullrun_ccd2_acisf12273_pi14-548_pass1_cl_src2.gif
[Mon May 13 10:52:26 2013] Size of ../../acisf12273/products/events/fullrun_ccd2_acisf12273_pi14-548_pass1_cl_src2_src.evt.gz[events] = 24 counts
[Mon May 13 10:52:26 2013] Mean chipx,y = (497.96, 841.33)
[Mon May 13 10:52:26 2013] Mean tdetx,y = (3902.33, 3588.04)
[Mon May 13 10:52:26 2013] chipx,y range = (479.00-514.00, 819.00-856.00)
[Mon May 13 10:52:26 2013] Size of ../../acisf12273/products/events/fullrun_ccd2_acisf12273_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 11 counts
[Mon May 13 10:52:27 2013] Not generating rmf since there are only 21 counts
[Mon May 13 10:52:27 2013] arf not found, will run specextract
[Mon May 13 10:52:57 2013] ../../acisf12273/products/spectra/fullrun_ccd2_acisf12273_pi14-548_pass1_cl_src2.warf not found
[Mon May 13 10:52:57 2013] ../../acisf12273/products/spectra/fullrun_ccd2_acisf12273_pi14-548_pass1_cl_src2.wrmf not found
[Mon May 13 10:52:57 2013] Removal of ../../acisf12273/products/spectra/fullrun_ccd2_acisf12273_pi14-548_pass1_cl_src2.soff failed
[Mon May 13 10:55:35 2013] Spectrum 2 has only 22 counts, deleting rmf
[Mon May 13 10:55:35 2013] 155.734
[Mon May 13 10:58:48 2013] Updating aperture counts using extracted products
[Mon May 13 10:58:48 2013] Total counts from fullrun_ccd2_acisf12273_pi14-548_pass1_cl_src2_src.pi.gz = 24.00
[Mon May 13 10:58:48 2013] Total counts from fullrun_ccd2_acisf12273_pi14-548_pass1_cl_src2_bgd.pi.gz = 11.00
[Mon May 13 10:58:48 2013] Got source and background scale factors 0.000002, 0.000026
[Mon May 13 10:58:48 2013] User source parameters:
  Position = (649.8, 294.9) = 5 48 24.19 -25 25 52.6
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source aperture counts = 23.1 +/- 6.0
  Background aperture counts = 0.9
  Rate = 0.002 +/- 0.0006

[Mon May 13 10:58:48 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 10:58:48 2013] Using photon index=1.80, rate=0.00217, arf fullrun_ccd2_acisf12273_pi14-548_pass1_cl_src2.arf
[Mon May 13 10:58:48 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 13 10:58:48 2013] Updating source flux to 3.3e-14
[Mon May 13 10:58:53 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting