[Sat Oct 29 23:00:16 2011] Detection parameters:
  Position = (879.9, 400.8) = 22 5 39.54 -5 33 23.3
  Extent = 0.7" x 0.5", rotation angle = 81 degrees
  Source counts = 18.6 +/- 4.5
  Background counts = 1.4
  Rate = 0.002 +/- 0.0005

[Sat Oct 29 23:00:16 2011] Off-axis axis estimate = 3.16'
[Sat Oct 29 23:13:49 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 23:13:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 23:13:49 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Sat Oct 29 23:13:49 2011] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.311
[Sat Oct 29 23:13:49 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.61"
[Sat Oct 29 23:18:35 2011] fullrun_ccd3_acisf12272_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 29 23:18:35 2011] fullrun_ccd3_acisf12272_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 29 23:18:35 2011] Fit fullrun_ccd3_acisf12272_pi14-548_cl_pass0_src2 appears to have run properly
[Sat Oct 29 23:18:35 2011] fullrun_ccd3_acisf12272_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 29 23:18:35 2011] fullrun_ccd3_acisf12272_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 29 23:18:35 2011] Fit fullrun_ccd3_acisf12272_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct 29 23:32:04 2011] Spatial fit model total counts = 19.879100, observed total counts = 21.000000
[Sat Oct 29 23:32:04 2011] Offset between fit and detection position for source 1 = 1.049523 pixels
[Sat Oct 29 23:32:04 2011] 19.683630 total counts/ 3.126730 bgd. counts: snr = 9.363406
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.049523 pixels
  Position = (880.8, 401.1) = 22 5 39.52 -5 33 23.4
  Extent = 0.7 (0.5-1.1)" x 0.4 (0.2-0.5)", rotation angle = 119 (95-142) degrees
  Source counts = 16.6 +/- 4.4
  Background counts = 3.1
  Rate = 0.002 +/- 0.0004
[Sat Oct 29 23:32:04 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 23:32:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 23:32:04 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 23:32:04 2011] Source does appear to be extended
[Sat Oct 29 23:32:04 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Sat Oct 29 23:43:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 23:43:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 23:43:28 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Sat Oct 29 23:43:28 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.877
[Sat Oct 29 23:43:28 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.54"
[Sat Oct 29 23:46:27 2011] fullrun_ccd3_acisf12272_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 29 23:46:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12272_pi14-548_cl_pass1_src2.csv
[Sat Oct 29 23:46:27 2011] fullrun_ccd3_acisf12272_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 29 23:46:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12272_pi14-548_cl_pass1_src2.csv
[Sat Oct 29 23:46:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12272_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12272_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 23:46:27 2011] fullrun_ccd3_acisf12272_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 29 23:46:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12272_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Oct 29 23:46:27 2011] fullrun_ccd3_acisf12272_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 29 23:46:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12272_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Oct 29 23:46:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12272_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12272_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 23:58:33 2011] Spatial fit model total counts = 18.071900, observed total counts = 21.000000
[Sat Oct 29 23:58:33 2011] Offset between fit and detection position for source 1 = 0.081375 pixels
[Sat Oct 29 23:58:33 2011] 17.658868 total counts/ 0.920868 bgd. counts: snr = 17.442345
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.081375 pixels
  Position = (880.8, 401.1) = 22 5 39.52 -5 33 23.4
  Extent = 0.7 (0.5-1.1)" x 0.4 (0.3-0.5)", rotation angle = 115 (97-143) degrees
  Source counts = 16.7 +/- 4.2
  Background counts = 0.9
  Rate = 0.002 +/- 0.0004
[Sat Oct 29 23:58:33 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 23:58:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 23:58:33 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 23:58:33 2011] Source does appear to be extended
[Sat Oct 29 23:58:33 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Sun Oct 30 00:07:52 2011] Writing source region out to fullrun_ccd3_acisf12272_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 30 00:07:52 2011] Extracting stamp from image fullrun_ccd3_acisf12272_pi14-548_cl_sm2.00.img.gz, (849, 369) - (913, 433)
[Sun Oct 30 00:07:52 2011] Writing fullrun_ccd3_acisf12272_pi14-548_pass1_cl_src1.gif
[Sun Oct 30 00:08:37 2011] Size of ../../acisf12272/products/events/fullrun_ccd3_acisf12272_pi14-548_pass1_cl_src1_src.evt.gz[events] = 18 counts
[Sun Oct 30 00:08:37 2011] Mean chipx,y = (828.39, 660.39)
[Sun Oct 30 00:08:37 2011] Mean tdetx,y = (4471.61, 3889.39)
[Sun Oct 30 00:08:37 2011] chipx,y range = (813.00-845.00, 643.00-675.00)
[Sun Oct 30 00:08:37 2011] Size of ../../acisf12272/products/events/fullrun_ccd3_acisf12272_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 8 counts
[Sun Oct 30 00:08:38 2011] Not generating rmf since there are only 16 counts
[Sun Oct 30 00:08:38 2011] arf not found, will run specextract
[Sun Oct 30 00:09:03 2011] ../../acisf12272/products/spectra/fullrun_ccd3_acisf12272_pi14-548_pass1_cl_src1.warf not found
[Sun Oct 30 00:09:03 2011] ../../acisf12272/products/spectra/fullrun_ccd3_acisf12272_pi14-548_pass1_cl_src1.wrmf not found
[Sun Oct 30 00:09:03 2011] Removal of ../../acisf12272/products/spectra/fullrun_ccd3_acisf12272_pi14-548_pass1_cl_src1.soff failed
[Sun Oct 30 00:09:53 2011] Spectrum 1 has only 17 counts, deleting rmf
[Sun Oct 30 00:09:53 2011] 196.522
[Sun Oct 30 00:10:46 2011] Updating aperture counts using extracted products
[Sun Oct 30 00:10:46 2011] Error reading totcts from fullrun_ccd3_acisf12272_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 30 00:10:46 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 00:10:46 2011] Using photon index=1.80, rate=0.00169, arf fullrun_ccd3_acisf12272_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 00:10:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 00:10:46 2011] Updating source flux to 2e-14
[Sun Oct 30 00:10:51 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 00:10:52 2011] acisf12272/analysis//spectral/fullrun_ccd3_acisf12272_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete