[Sat Oct 29 22:58:51 2011] Detection parameters:
  Position = (319.9, 835.7) = 22 5 30.74 -5 39 50.1
  Extent = 0.5" x 0.5", rotation angle = 53 degrees
  Source counts = 21.6 +/- 4.7
  Background counts = 0.4
  Rate = 0.002 +/- 0.0005

[Sat Oct 29 22:58:51 2011] Off-axis axis estimate = 3.75'
[Sat Oct 29 23:02:03 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 23:02:03 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Sat Oct 29 23:02:03 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Sat Oct 29 23:02:03 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.76"
[Sat Oct 29 23:07:19 2011] fullrun_ccd0_acisf12272_pi14-548_cl_pass0_src4.ximg exists
[Sat Oct 29 23:07:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12272_pi14-548_cl_pass0_src4.csv
[Sat Oct 29 23:07:19 2011] fullrun_ccd0_acisf12272_pi14-548_cl_pass0_src4_1.ximg exists
[Sat Oct 29 23:07:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12272_pi14-548_cl_pass0_src4.csv
[Sat Oct 29 23:07:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12272_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12272_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 23:07:19 2011] fullrun_ccd0_acisf12272_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sat Oct 29 23:07:19 2011] fullrun_ccd0_acisf12272_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Oct 29 23:07:19 2011] Fit fullrun_ccd0_acisf12272_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Oct 29 23:32:02 2011] Spatial fit model total counts = 20.269600, observed total counts = 22.000000
[Sat Oct 29 23:32:02 2011] Offset between fit and detection position for source 6 = 0.816910 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.816910 pixels
  Position = (320.6, 836.1) = 22 5 30.73 -5 39 50.1
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 20.4 +/- 4.5
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Sat Oct 29 23:32:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 23:32:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 23:32:02 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 23:32:02 2011] Source does appear to be extended
[Sat Oct 29 23:32:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 23:32:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 23:32:14 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sat Oct 29 23:32:14 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.894
[Sat Oct 29 23:32:14 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.66"
[Sat Oct 29 23:37:26 2011] fullrun_ccd0_acisf12272_pi14-548_cl_pass1_src4.ximg exists
[Sat Oct 29 23:37:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12272_pi14-548_cl_pass1_src4.csv
[Sat Oct 29 23:37:26 2011] fullrun_ccd0_acisf12272_pi14-548_cl_pass1_src4_1.ximg exists
[Sat Oct 29 23:37:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12272_pi14-548_cl_pass1_src4.csv
[Sat Oct 29 23:37:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12272_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12272_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 23:37:26 2011] fullrun_ccd0_acisf12272_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sat Oct 29 23:37:26 2011] fullrun_ccd0_acisf12272_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Oct 29 23:37:26 2011] Fit fullrun_ccd0_acisf12272_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Oct 29 23:58:32 2011] Spatial fit model total counts = 20.698400, observed total counts = 22.000000
[Sat Oct 29 23:58:32 2011] Offset between fit and detection position for source 6 = 0.077539 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.077539 pixels
  Position = (320.6, 836.1) = 22 5 30.73 -5 39 50.1
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 20.8 +/- 4.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Sat Oct 29 23:58:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 23:58:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 23:58:32 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 23:58:32 2011] Source does appear to be extended
[Sat Oct 29 23:58:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 23:58:43 2011] Writing source region out to fullrun_ccd0_acisf12272_pi14-548_pass1_cl_src6_src.reg
[Sat Oct 29 23:58:43 2011] Extracting stamp from image fullrun_ccd0_acisf12272_pi14-548_cl_sm2.00.img.gz, (290, 805) - (351, 867)
[Sat Oct 29 23:58:43 2011] Writing fullrun_ccd0_acisf12272_pi14-548_pass1_cl_src6.gif
[Sun Oct 30 00:00:58 2011] Size of ../../acisf12272/products/events/fullrun_ccd0_acisf12272_pi14-548_pass1_cl_src6_src.evt.gz[events] = 22 counts
[Sun Oct 30 00:00:58 2011] Mean chipx,y = (829.45, 691.50)
[Sun Oct 30 00:00:58 2011] Mean tdetx,y = (3752.50, 4302.55)
[Sun Oct 30 00:00:58 2011] chipx,y range = (812.00-847.00, 672.00-708.00)
[Sun Oct 30 00:00:58 2011] Size of ../../acisf12272/products/events/fullrun_ccd0_acisf12272_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 2 counts
[Sun Oct 30 00:00:59 2011] Not generating rmf since there are only 20 counts
[Sun Oct 30 00:00:59 2011] arf not found, will run specextract
[Sun Oct 30 00:01:24 2011] ../../acisf12272/products/spectra/fullrun_ccd0_acisf12272_pi14-548_pass1_cl_src6.warf not found
[Sun Oct 30 00:01:24 2011] ../../acisf12272/products/spectra/fullrun_ccd0_acisf12272_pi14-548_pass1_cl_src6.wrmf not found
[Sun Oct 30 00:01:24 2011] Removal of ../../acisf12272/products/spectra/fullrun_ccd0_acisf12272_pi14-548_pass1_cl_src6.soff failed
[Sun Oct 30 00:01:31 2011] Spectrum 6 has only 21 counts, deleting rmf
[Sun Oct 30 00:01:31 2011] 192.722
[Sun Oct 30 00:10:46 2011] Updating aperture counts using extracted products
[Sun Oct 30 00:10:46 2011] Error reading totcts from fullrun_ccd0_acisf12272_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Oct 30 00:10:46 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 00:10:46 2011] Using photon index=1.80, rate=0.00209, arf fullrun_ccd0_acisf12272_pi14-548_pass1_cl_src6.arf
[Sun Oct 30 00:10:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 00:10:46 2011] Updating source flux to 2.5e-14
[Sun Oct 30 00:10:48 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 00:10:49 2011] acisf12272/analysis//spectral/fullrun_ccd0_acisf12272_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete