[Sun Feb 12 05:56:33 2012] Detection parameters:
  Position = (971.8, 816.0) = 3 46 30.51 -54 37 18.5
  Extent = 2.1" x 0.9", rotation angle = 57 degrees
  Source counts = 10.4 +/- 3.5
  Background counts = 1.6
  Rate = 0.0006 +/- 0.0002

[Sun Feb 12 05:56:33 2012] Off-axis axis estimate = 6.60'
[Sun Feb 12 06:29:35 2012] Using EEF radius (= 1.95 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 06:29:35 2012] Initial guess for spatial extent in simple fitting = 1.95"
[Sun Feb 12 06:29:35 2012] source mask rpix=4.0, npix_max = 79, mask sum = 72, frac = 0.907
[Sun Feb 12 06:29:35 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 1.95"
[Sun Feb 12 06:37:02 2012] fullrun_ccd3_acisf12270_pi14-548_cl_pass0_src7.ximg exists
[Sun Feb 12 06:37:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12270_pi14-548_cl_pass0_src7.csv
[Sun Feb 12 06:37:02 2012] fullrun_ccd3_acisf12270_pi14-548_cl_pass0_src7_1.ximg exists
[Sun Feb 12 06:37:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12270_pi14-548_cl_pass0_src7.csv
[Sun Feb 12 06:37:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12270_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12270_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 06:37:02 2012] fullrun_ccd3_acisf12270_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun Feb 12 06:37:02 2012] fullrun_ccd3_acisf12270_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Feb 12 06:37:02 2012] Fit fullrun_ccd3_acisf12270_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Feb 12 06:37:08 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 23.607565 pixels away
[Sun Feb 12 06:37:08 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 06:37:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 06:37:08 2012] Assessing source extent using major
[Sun Feb 12 06:37:08 2012] Source does appear to be extended
[Sun Feb 12 06:37:08 2012] Computing asymmetry using major and minor axis, asym = 2.37
[Sun Feb 12 06:37:08 2012] Source is asymmetric
[Sun Feb 12 07:10:59 2012] Using EEF radius (= 1.95 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 07:10:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 07:10:59 2012] Initial guess for spatial extent in simple fitting = 1.95"
[Sun Feb 12 07:10:59 2012] source mask rpix=4.0, npix_max = 79, mask sum = 72, frac = 0.907
[Sun Feb 12 07:10:59 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 1.95"
[Sun Feb 12 07:18:19 2012] fullrun_ccd3_acisf12270_pi14-548_cl_pass1_src7.ximg exists
[Sun Feb 12 07:18:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12270_pi14-548_cl_pass1_src7.csv
[Sun Feb 12 07:18:19 2012] fullrun_ccd3_acisf12270_pi14-548_cl_pass1_src7_1.ximg exists
[Sun Feb 12 07:18:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12270_pi14-548_cl_pass1_src7.csv
[Sun Feb 12 07:18:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12270_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12270_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 07:18:19 2012] fullrun_ccd3_acisf12270_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun Feb 12 07:18:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12270_pi14-548_cl_pass1_tfrozen_src7.csv
[Sun Feb 12 07:18:19 2012] fullrun_ccd3_acisf12270_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Feb 12 07:18:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12270_pi14-548_cl_pass1_tfrozen_src7.csv
[Sun Feb 12 07:18:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12270_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12270_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 07:18:24 2012] Spatial fit model total counts = 14.847500, observed total counts = 16.000000
[Sun Feb 12 07:18:24 2012] Offset between fit and detection position for source 9 = 1.059540 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.059540 pixels
  Position = (972.8, 816.0) = 3 46 30.48 -54 37 18.7
  Extent = 3.5 (2.6-3.9)" x 1.3 (0.8-2.1)", rotation angle = 305 (282-321) degrees
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Sun Feb 12 07:18:24 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 07:18:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 07:18:24 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 07:18:24 2012] Source does appear to be extended
[Sun Feb 12 07:18:24 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Sun Feb 12 07:38:15 2012] Writing source region out to fullrun_ccd3_acisf12270_pi14-548_pass1_cl_src9_src.reg
[Sun Feb 12 07:38:15 2012] Extracting stamp from image fullrun_ccd3_acisf12270_pi14-548_cl_sm2.00.img.gz, (814, 657) - (1132, 975)
[Sun Feb 12 07:38:15 2012] Writing fullrun_ccd3_acisf12270_pi14-548_pass1_cl_src9.gif
[Sun Feb 12 07:41:18 2012] Size of ../../acisf12270/products/events/fullrun_ccd3_acisf12270_pi14-548_pass1_cl_src9_src.evt.gz[events] = 18 counts
[Sun Feb 12 07:41:18 2012] Mean chipx,y = (240.28, 318.89)
[Sun Feb 12 07:41:18 2012] Mean tdetx,y = (4813.11, 3301.28)
[Sun Feb 12 07:41:18 2012] chipx,y range = (219.00-260.00, 299.00-343.00)
[Sun Feb 12 07:41:18 2012] Size of ../../acisf12270/products/events/fullrun_ccd3_acisf12270_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 144 counts
[Sun Feb 12 07:41:19 2012] Not generating rmf since there are only 14 counts
[Sun Feb 12 07:41:19 2012] arf not found, will run specextract
[Sun Feb 12 07:41:44 2012] ../../acisf12270/products/spectra/fullrun_ccd3_acisf12270_pi14-548_pass1_cl_src9.warf not found
[Sun Feb 12 07:41:44 2012] ../../acisf12270/products/spectra/fullrun_ccd3_acisf12270_pi14-548_pass1_cl_src9.wrmf not found
[Sun Feb 12 07:41:44 2012] Removal of ../../acisf12270/products/spectra/fullrun_ccd3_acisf12270_pi14-548_pass1_cl_src9.soff failed
[Sun Feb 12 07:44:32 2012] Spectrum 9 has only 15 counts, deleting rmf
[Sun Feb 12 07:44:32 2012] 176.592
[Sun Feb 12 07:44:35 2012] Updating aperture counts using extracted products
[Sun Feb 12 07:44:35 2012] Error reading totcts from fullrun_ccd3_acisf12270_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Feb 12 07:44:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 07:44:35 2012] Using photon index=1.80, rate=0.00084, arf fullrun_ccd3_acisf12270_pi14-548_pass1_cl_src9.arf
[Sun Feb 12 07:44:35 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 07:44:35 2012] Updating source flux to 1.2e-14
[Sun Feb 12 07:44:40 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 07:44:41 2012] acisf12270/analysis//spectral/fullrun_ccd3_acisf12270_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete