[Sun Feb 12 05:56:30 2012] Detection parameters:
  Position = (654.6, 508.7) = 3 47 42.23 -54 36 14.0
  Extent = 0.8" x 0.5", rotation angle = 26 degrees
  Source counts = 14.6 +/- 3.9
  Background counts = 0.4
  Rate = 0.0008 +/- 0.0002

[Sun Feb 12 05:56:31 2012] Off-axis axis estimate = 4.02'
[Sun Feb 12 06:24:15 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 06:24:15 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Sun Feb 12 06:24:15 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.034
[Sun Feb 12 06:24:15 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.84"
[Sun Feb 12 06:29:35 2012] fullrun_ccd2_acisf12270_pi14-548_cl_pass0_src3.ximg exists
[Sun Feb 12 06:29:35 2012] fullrun_ccd2_acisf12270_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Feb 12 06:29:35 2012] Fit fullrun_ccd2_acisf12270_pi14-548_cl_pass0_src3 appears to have run properly
[Sun Feb 12 06:29:35 2012] fullrun_ccd2_acisf12270_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb 12 06:29:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12270_pi14-548_cl_pass0_tfrozen_src3.csv
[Sun Feb 12 06:29:35 2012] fullrun_ccd2_acisf12270_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb 12 06:29:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12270_pi14-548_cl_pass0_tfrozen_src3.csv
[Sun Feb 12 06:29:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12270_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12270_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 06:37:07 2012] Spatial fit model total counts = 16.412400, observed total counts = 18.000000
[Sun Feb 12 06:37:07 2012] Offset between fit and detection position for source 4 = 0.917921 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.917921 pixels
  Position = (655.3, 509.3) = 3 47 42.22 -54 36 14.0
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 15.8 +/- 4.0
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sun Feb 12 06:37:07 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 06:37:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 06:37:07 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 06:37:07 2012] Source does appear to be extended
[Sun Feb 12 06:37:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 07:06:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 07:06:47 2012] Initial guess for spatial extent in simple fitting = 0.97"
[Sun Feb 12 07:06:47 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029
[Sun Feb 12 07:06:47 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.97"
[Sun Feb 12 07:10:59 2012] fullrun_ccd2_acisf12270_pi14-548_cl_pass1_src3.ximg exists
[Sun Feb 12 07:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12270_pi14-548_cl_pass1_src3.csv
[Sun Feb 12 07:10:59 2012] fullrun_ccd2_acisf12270_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Feb 12 07:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12270_pi14-548_cl_pass1_src3.csv
[Sun Feb 12 07:10:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12270_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12270_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 07:10:59 2012] fullrun_ccd2_acisf12270_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Feb 12 07:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12270_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun Feb 12 07:10:59 2012] fullrun_ccd2_acisf12270_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Feb 12 07:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12270_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun Feb 12 07:10:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12270_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12270_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 07:18:23 2012] Spatial fit model total counts = 16.822800, observed total counts = 18.000000
[Sun Feb 12 07:18:23 2012] Offset between fit and detection position for source 4 = 0.142949 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.142949 pixels
  Position = (655.4, 509.4) = 3 47 42.21 -54 36 13.9
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source counts = 16.0 +/- 4.0
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sun Feb 12 07:18:23 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 07:18:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 07:18:23 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 07:18:23 2012] Source does appear to be extended
[Sun Feb 12 07:18:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 07:26:26 2012] Writing source region out to fullrun_ccd2_acisf12270_pi14-548_pass1_cl_src4_src.reg
[Sun Feb 12 07:26:26 2012] Extracting stamp from image fullrun_ccd2_acisf12270_pi14-548_cl_sm2.00.img.gz, (615, 469) - (696, 550)
[Sun Feb 12 07:26:26 2012] Writing fullrun_ccd2_acisf12270_pi14-548_pass1_cl_src4.gif
[Sun Feb 12 07:27:49 2012] Size of ../../acisf12270/products/events/fullrun_ccd2_acisf12270_pi14-548_pass1_cl_src4_src.evt.gz[events] = 16 counts
[Sun Feb 12 07:27:49 2012] Mean chipx,y = (340.00, 553.69)
[Sun Feb 12 07:27:49 2012] Mean tdetx,y = (3614.69, 3746.00)
[Sun Feb 12 07:27:49 2012] chipx,y range = (325.00-359.00, 539.00-572.00)
[Sun Feb 12 07:27:49 2012] Size of ../../acisf12270/products/events/fullrun_ccd2_acisf12270_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 11 counts
[Sun Feb 12 07:27:50 2012] Not generating rmf since there are only 15 counts
[Sun Feb 12 07:27:50 2012] arf not found, will run specextract
[Sun Feb 12 07:28:17 2012] ../../acisf12270/products/spectra/fullrun_ccd2_acisf12270_pi14-548_pass1_cl_src4.warf not found
[Sun Feb 12 07:28:17 2012] ../../acisf12270/products/spectra/fullrun_ccd2_acisf12270_pi14-548_pass1_cl_src4.wrmf not found
[Sun Feb 12 07:28:17 2012] Removal of ../../acisf12270/products/spectra/fullrun_ccd2_acisf12270_pi14-548_pass1_cl_src4.soff failed
[Sun Feb 12 07:38:15 2012] Spectrum 4 has only 16 counts, deleting rmf
[Sun Feb 12 07:38:15 2012] 189.535
[Sun Feb 12 07:44:35 2012] Updating aperture counts using extracted products
[Sun Feb 12 07:44:35 2012] Error reading totcts from fullrun_ccd2_acisf12270_pi14-548_pass1_cl_src4_src.pi.gz
[Sun Feb 12 07:44:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 07:44:35 2012] Using photon index=1.80, rate=0.000896, arf fullrun_ccd2_acisf12270_pi14-548_pass1_cl_src4.arf
[Sun Feb 12 07:44:35 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 07:44:35 2012] Updating source flux to 1.1e-14
[Sun Feb 12 07:44:39 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 07:44:40 2012] acisf12270/analysis//spectral/fullrun_ccd2_acisf12270_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete