[Sun Feb 12 05:56:28 2012] Detection parameters:
  Position = (567.7, 487.7) = 3 47 19.02 -54 47 57.3
  Extent = 3.5" x 2.9", rotation angle = 86 degrees
  Source counts = 36.2 +/- 6.8
  Background counts = 9.8
  Rate = 0.002 +/- 0.0004

[Sun Feb 12 05:56:29 2012] Off-axis axis estimate = 10.39'
[Sun Feb 12 06:02:05 2012] Using EEF radius (= 4.79 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 06:02:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 06:02:05 2012] Initial guess for spatial extent in simple fitting = 4.79"
[Sun Feb 12 06:02:05 2012] source mask rpix=9.7, npix_max = 419, mask sum = 420, frac = 1.002
[Sun Feb 12 06:02:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 4.79"
[Sun Feb 12 06:24:15 2012] fullrun_ccd1_acisf12270_pi14-548_cl_pass0_src1.ximg exists
[Sun Feb 12 06:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12270_pi14-548_cl_pass0_src1.csv
[Sun Feb 12 06:24:15 2012] fullrun_ccd1_acisf12270_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Feb 12 06:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12270_pi14-548_cl_pass0_src1.csv
[Sun Feb 12 06:24:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12270_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12270_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 06:24:15 2012] fullrun_ccd1_acisf12270_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 12 06:24:15 2012] fullrun_ccd1_acisf12270_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 12 06:24:15 2012] Fit fullrun_ccd1_acisf12270_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 12 06:37:06 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 55.841031 pixels away
[Sun Feb 12 06:37:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 06:37:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 06:37:06 2012] Assessing source extent using major
[Sun Feb 12 06:37:06 2012] Source does appear to be extended
[Sun Feb 12 06:37:06 2012] Computing asymmetry using major and minor axis, asym = 1.19
[Sun Feb 12 06:42:20 2012] Using EEF radius (= 4.79 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 06:42:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 06:42:20 2012] Initial guess for spatial extent in simple fitting = 4.79"
[Sun Feb 12 06:42:20 2012] source mask rpix=9.7, npix_max = 419, mask sum = 420, frac = 1.002
[Sun Feb 12 06:42:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.79"
[Sun Feb 12 07:06:47 2012] fullrun_ccd1_acisf12270_pi14-548_cl_pass1_src1.ximg exists
[Sun Feb 12 07:06:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12270_pi14-548_cl_pass1_src1.csv
[Sun Feb 12 07:06:47 2012] fullrun_ccd1_acisf12270_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Feb 12 07:06:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12270_pi14-548_cl_pass1_src1.csv
[Sun Feb 12 07:06:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12270_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12270_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 07:06:47 2012] fullrun_ccd1_acisf12270_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 12 07:06:47 2012] fullrun_ccd1_acisf12270_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 12 07:06:47 2012] Fit fullrun_ccd1_acisf12270_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 12 07:18:23 2012] Spatial fit model total counts = 64.999600, observed total counts = 65.000000
[Sun Feb 12 07:18:23 2012] Offset between fit and detection position for source 2 = 1.588238 pixels
[Sun Feb 12 07:18:23 2012] 64.973700 total counts/ 24.175600 bgd. counts: snr = 8.297577
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.588238 pixels
  Position = (568.8, 488.9) = 3 47 18.98 -54 47 56.9
  Extent = 4.0 (3.2-5.2)", rotation angle = 0
  Source counts = 40.8 +/- 8.1
  Background counts = 24.2
  Rate = 0.002 +/- 0.0005
[Sun Feb 12 07:18:23 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 07:18:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 07:18:23 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 07:18:23 2012] Source does appear to be extended
[Sun Feb 12 07:18:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 07:21:07 2012] Writing source region out to fullrun_ccd1_acisf12270_pi14-548_pass1_cl_src2_src.reg
[Sun Feb 12 07:21:07 2012] Extracting stamp from image fullrun_ccd1_acisf12270_pi14-548_cl_sm2.00.img.gz, (388, 308) - (750, 670)
[Sun Feb 12 07:21:07 2012] Writing fullrun_ccd1_acisf12270_pi14-548_pass1_cl_src2.gif
[Sun Feb 12 07:21:09 2012] Size of ../../acisf12270/products/events/fullrun_ccd1_acisf12270_pi14-548_pass1_cl_src2_src.evt.gz[events] = 52 counts
[Sun Feb 12 07:21:09 2012] Mean chipx,y = (738.60, 514.23)
[Sun Feb 12 07:21:09 2012] Mean tdetx,y = (4617.77, 4845.60)
[Sun Feb 12 07:21:09 2012] chipx,y range = (702.00-775.00, 487.00-545.00)
[Sun Feb 12 07:21:09 2012] Size of ../../acisf12270/products/events/fullrun_ccd1_acisf12270_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 211 counts
[Sun Feb 12 07:21:10 2012] Not generating rmf since there are only 40 counts
[Sun Feb 12 07:21:10 2012] arf not found, will run specextract
[Sun Feb 12 07:21:33 2012] ../../acisf12270/products/spectra/fullrun_ccd1_acisf12270_pi14-548_pass1_cl_src2.warf not found
[Sun Feb 12 07:21:33 2012] ../../acisf12270/products/spectra/fullrun_ccd1_acisf12270_pi14-548_pass1_cl_src2.wrmf not found
[Sun Feb 12 07:21:33 2012] Removal of ../../acisf12270/products/spectra/fullrun_ccd1_acisf12270_pi14-548_pass1_cl_src2.soff failed
[Sun Feb 12 07:26:26 2012] Spectrum 2 has only 41 counts, deleting rmf
[Sun Feb 12 07:26:26 2012] 158.9
[Sun Feb 12 07:44:35 2012] Updating aperture counts using extracted products
[Sun Feb 12 07:44:35 2012] Error reading totcts from fullrun_ccd1_acisf12270_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Feb 12 07:44:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 07:44:35 2012] Using photon index=1.80, rate=0.00229, arf fullrun_ccd1_acisf12270_pi14-548_pass1_cl_src2.arf
[Sun Feb 12 07:44:35 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 07:44:35 2012] Updating source flux to 3.4e-14
[Sun Feb 12 07:44:38 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 07:44:39 2012] acisf12270/analysis//spectral/fullrun_ccd1_acisf12270_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete