[Sat May  4 20:39:53 2013] Detection parameters:
  Position = (581.6, 331.8) = 2 15 14.04 -52 13 59.8
  Extent = 0.5" x 0.5", rotation angle = 78 degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.2
  Rate = 0.0005 +/- 0.0002

[Sat May  4 20:39:53 2013] Off-axis axis estimate = 2.67'
[Sat May  4 21:30:03 2013] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Sat May  4 21:30:03 2013] Initial guess for spatial extent in simple fitting = 0.52"
[Sat May  4 21:30:03 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.931
[Sat May  4 21:30:03 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 0.52"
[Sat May  4 21:37:21 2013] fullrun_ccd3_acisf12268_pi14-548_cl_pass0_src6.ximg exists
[Sat May  4 21:37:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12268_pi14-548_cl_pass0_src6.csv
[Sat May  4 21:37:21 2013] fullrun_ccd3_acisf12268_pi14-548_cl_pass0_src6_1.ximg exists
[Sat May  4 21:37:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12268_pi14-548_cl_pass0_src6.csv
[Sat May  4 21:37:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12268_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12268_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 21:37:21 2013] fullrun_ccd3_acisf12268_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat May  4 21:37:21 2013] fullrun_ccd3_acisf12268_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat May  4 21:37:21 2013] Fit fullrun_ccd3_acisf12268_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sat May  4 22:37:35 2013] Spatial fit model total counts = 13.408200, observed total counts = 14.000000
[Sat May  4 22:37:35 2013] Offset between fit and detection position for source 12 = 0.841694 pixels
[Sat May  4 22:37:35 2013] 13.118260 total counts/ 3.018860 bgd. counts: snr = 5.812649
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.841694 pixels
  Position = (582.1, 332.5) = 2 15 14.04 -52 13 59.7
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 10.1 +/- 3.6
  Background counts = 3.0
  Rate = 0.0005 +/- 0.0002
[Sat May  4 22:37:35 2013] Vigneting correction estimate = 1.000000
[Sat May  4 22:37:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 22:37:35 2013] Assessing source extent using major axis lower bound
[Sat May  4 22:37:35 2013] Source does appear to be extended
[Sat May  4 22:37:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 23:23:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May  4 23:23:15 2013] Initial guess for spatial extent in simple fitting = 0.34"
[Sat May  4 23:23:15 2013] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.066
[Sat May  4 23:23:15 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 0.34"
[Sat May  4 23:30:54 2013] fullrun_ccd3_acisf12268_pi14-548_cl_pass1_src6.ximg exists
[Sat May  4 23:30:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12268_pi14-548_cl_pass1_src6.csv
[Sat May  4 23:30:54 2013] fullrun_ccd3_acisf12268_pi14-548_cl_pass1_src6_1.ximg exists
[Sat May  4 23:30:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12268_pi14-548_cl_pass1_src6.csv
[Sat May  4 23:30:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12268_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12268_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 23:30:54 2013] fullrun_ccd3_acisf12268_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sat May  4 23:30:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12268_pi14-548_cl_pass1_tfrozen_src6.csv
[Sat May  4 23:30:54 2013] fullrun_ccd3_acisf12268_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sat May  4 23:30:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12268_pi14-548_cl_pass1_tfrozen_src6.csv
[Sat May  4 23:30:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12268_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12268_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 00:38:55 2013] Spatial fit model total counts = 11.256200, observed total counts = 14.000000
[Sun May  5 00:38:55 2013] Offset between fit and detection position for source 12 = 0.012078 pixels
[Sun May  5 00:38:55 2013] 10.637528 total counts/ 0.495628 bgd. counts: snr = 14.405934
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.012078 pixels
  Position = (582.1, 332.4) = 2 15 14.04 -52 13 59.7
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 10.1 +/- 3.3
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0002
[Sun May  5 00:38:55 2013] Vigneting correction estimate = 1.000000
[Sun May  5 00:38:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 00:38:55 2013] Assessing source extent using major axis lower bound
[Sun May  5 00:38:55 2013] Source does appear to be extended
[Sun May  5 00:38:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 00:56:19 2013] Writing source region out to fullrun_ccd3_acisf12268_pi14-548_pass1_cl_src12_src.reg
[Sun May  5 00:56:19 2013] Extracting stamp from image fullrun_ccd3_acisf12268_pi14-548_cl_sm2.00.img.gz, (566, 317) - (598, 348)
[Sun May  5 00:56:19 2013] Writing fullrun_ccd3_acisf12268_pi14-548_pass1_cl_src12.gif
[Sun May  5 00:59:08 2013] Size of ../../acisf12268/products/events/fullrun_ccd3_acisf12268_pi14-548_pass1_cl_src12_src.evt.gz[events] = 10 counts
[Sun May  5 00:59:08 2013] Mean chipx,y = (781.00, 719.10)
[Sun May  5 00:59:08 2013] Mean tdetx,y = (4412.90, 3842.00)
[Sun May  5 00:59:08 2013] chipx,y range = (765.00-797.00, 706.00-738.00)
[Sun May  5 00:59:08 2013] Size of ../../acisf12268/products/events/fullrun_ccd3_acisf12268_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 3 counts
[Sun May  5 00:59:09 2013] Not generating rmf since there are only 10 counts
[Sun May  5 00:59:09 2013] arf not found, will run specextract
[Sun May  5 00:59:37 2013] ../../acisf12268/products/spectra/fullrun_ccd3_acisf12268_pi14-548_pass1_cl_src12.warf not found
[Sun May  5 00:59:37 2013] ../../acisf12268/products/spectra/fullrun_ccd3_acisf12268_pi14-548_pass1_cl_src12.wrmf not found
[Sun May  5 00:59:37 2013] Removal of ../../acisf12268/products/spectra/fullrun_ccd3_acisf12268_pi14-548_pass1_cl_src12.soff failed
[Sun May  5 01:01:15 2013] Spectrum 12 has only 10 counts, deleting rmf
[Sun May  5 01:01:15 2013] 187.78
[Sun May  5 01:03:13 2013] Updating aperture counts using extracted products
[Sun May  5 01:03:13 2013] Total counts from fullrun_ccd3_acisf12268_pi14-548_pass1_cl_src12_src.pi.gz = 10.00
[Sun May  5 01:03:13 2013] Total counts from fullrun_ccd3_acisf12268_pi14-548_pass1_cl_src12_bgd.pi.gz = 3.00
[Sun May  5 01:03:13 2013] Got source and background scale factors 0.000000, 0.000004
[Sun May  5 01:03:13 2013] User source parameters:
  Position = (582.1, 332.4) = 2 15 14.04 -52 13 59.7
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source aperture counts = 9.7 +/- 4.3
  Background aperture counts = 0.3
  Rate = 0.0005 +/- 0.0002

[Sun May  5 01:03:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 01:03:13 2013] Using photon index=1.80, rate=0.000488, arf fullrun_ccd3_acisf12268_pi14-548_pass1_cl_src12.arf
[Sun May  5 01:03:13 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May  5 01:03:14 2013] Updating source flux to 6.1e-15
[Sun May  5 01:03:23 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting