[Sat May  4 20:39:20 2013] Detection parameters:
  Position = (583.5, 828.5) = 2 16 5.34 -52 13 24.8
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 39.9 +/- 6.4
  Background counts = 1.1
  Rate = 0.002 +/- 0.0003

[Sat May  4 20:39:20 2013] Off-axis axis estimate = 5.21'
[Sat May  4 21:16:51 2013] Using EEF radius (= 1.27 ")to estimate initial spatial extent for simple fitting
[Sat May  4 21:16:51 2013] Initial guess for spatial extent in simple fitting = 1.27"
[Sat May  4 21:16:51 2013] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.110
[Sat May  4 21:16:51 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 1.27"
[Sat May  4 21:30:03 2013] fullrun_ccd2_acisf12268_pi14-548_cl_pass0_src5.ximg exists
[Sat May  4 21:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12268_pi14-548_cl_pass0_src5.csv
[Sat May  4 21:30:03 2013] fullrun_ccd2_acisf12268_pi14-548_cl_pass0_src5_1.ximg exists
[Sat May  4 21:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12268_pi14-548_cl_pass0_src5.csv
[Sat May  4 21:30:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12268_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12268_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 21:30:03 2013] fullrun_ccd2_acisf12268_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat May  4 21:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12268_pi14-548_cl_pass0_tfrozen_src5.csv
[Sat May  4 21:30:03 2013] fullrun_ccd2_acisf12268_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat May  4 21:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12268_pi14-548_cl_pass0_tfrozen_src5.csv
[Sat May  4 21:30:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12268_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12268_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 22:37:34 2013] Spatial fit model total counts = 45.408000, observed total counts = 60.000000
[Sat May  4 22:37:34 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 22:37:34 2013] Vigneting correction estimate = 1.000000
[Sat May  4 22:37:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 22:37:34 2013] Assessing source extent using major
[Sat May  4 22:37:34 2013] Source does appear to be extended
[Sat May  4 22:37:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 23:10:52 2013] Using EEF radius (= 1.27 ")to estimate initial spatial extent for simple fitting
[Sat May  4 23:10:52 2013] Initial guess for spatial extent in simple fitting = 1.27"
[Sat May  4 23:10:52 2013] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.110
[Sat May  4 23:10:52 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 1.27"
[Sat May  4 23:23:14 2013] fullrun_ccd2_acisf12268_pi14-548_cl_pass1_src5.ximg exists
[Sat May  4 23:23:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12268_pi14-548_cl_pass1_src5.csv
[Sat May  4 23:23:14 2013] fullrun_ccd2_acisf12268_pi14-548_cl_pass1_src5_1.ximg exists
[Sat May  4 23:23:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12268_pi14-548_cl_pass1_src5.csv
[Sat May  4 23:23:14 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12268_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12268_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 23:23:14 2013] fullrun_ccd2_acisf12268_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat May  4 23:23:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12268_pi14-548_cl_pass1_tfrozen_src5.csv
[Sat May  4 23:23:14 2013] fullrun_ccd2_acisf12268_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat May  4 23:23:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12268_pi14-548_cl_pass1_tfrozen_src5.csv
[Sat May  4 23:23:14 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12268_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12268_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 00:38:55 2013] Spatial fit model total counts = 45.408000, observed total counts = 60.000000
[Sun May  5 00:38:55 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 00:38:55 2013] Vigneting correction estimate = 1.000000
[Sun May  5 00:38:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 00:38:55 2013] Assessing source extent using major
[Sun May  5 00:38:55 2013] Source does appear to be extended
[Sun May  5 00:38:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 00:46:31 2013] Writing source region out to fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3_src.reg
[Sun May  5 00:46:31 2013] Extracting stamp from image fullrun_ccd2_acisf12268_pi14-548_cl_sm2.00.img.gz, (561, 806) - (606, 851)
[Sun May  5 00:46:31 2013] Writing fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3.gif
[Sun May  5 00:48:56 2013] Size of ../../acisf12268/products/events/fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3_src.evt.gz[events] = 50 counts
[Sun May  5 00:48:56 2013] Mean chipx,y = (700.06, 496.26)
[Sun May  5 00:48:56 2013] Mean tdetx,y = (3557.26, 3385.94)
[Sun May  5 00:48:56 2013] chipx,y range = (682.00-717.00, 482.00-518.00)
[Sun May  5 00:48:56 2013] Size of ../../acisf12268/products/events/fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 7 counts
[Sun May  5 00:48:57 2013] Not generating rmf since there are only 39 counts
[Sun May  5 00:48:57 2013] arf not found, will run specextract
[Sun May  5 00:49:23 2013] ../../acisf12268/products/spectra/fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3.warf not found
[Sun May  5 00:49:23 2013] ../../acisf12268/products/spectra/fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3.wrmf not found
[Sun May  5 00:49:23 2013] Removal of ../../acisf12268/products/spectra/fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3.soff failed
[Sun May  5 00:56:19 2013] Spectrum 3 has only 40 counts, deleting rmf
[Sun May  5 00:56:19 2013] 176.663
[Sun May  5 01:03:10 2013] Updating aperture counts using extracted products
[Sun May  5 01:03:10 2013] Total counts from fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3_src.pi.gz = 50.00
[Sun May  5 01:03:10 2013] Total counts from fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3_bgd.pi.gz = 7.00
[Sun May  5 01:03:10 2013] Got source and background scale factors 0.000001, 0.000009
[Sun May  5 01:03:11 2013] User source parameters:
  Position = (583.5, 828.5) = 2 16 5.34 -52 13 24.8
  Extent = 0.5" x 0.5", rotation angle = 90
  Source aperture counts = 49.4 +/- 8.1
  Background aperture counts = 0.6
  Rate = 0.002 +/- 0.0004

[Sun May  5 01:03:11 2013] Updating counts from extracted products
[Sun May  5 01:03:11 2013] Set source signif. to 49.41/0.77 = 64.17
[Sun May  5 01:03:12 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 01:03:12 2013] Using photon index=1.80, rate=0.00238, arf fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3.arf
[Sun May  5 01:03:12 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May  5 01:03:12 2013] Updating source flux to 3.2e-14
[Sun May  5 01:03:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 01:03:23 2013] acisf12268/analysis//spectral/fullrun_ccd2_acisf12268_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete