[Fri Apr 20 00:41:28 2012] Detection parameters:
  Position = (473.7, 478.4) = 6 41 47.23 -49 47 46.5
  Extent = 0.6" x 0.5", rotation angle = 110 degrees
  Source counts = 11.1 +/- 3.5
  Background counts = 0.9
  Rate = 0.0006 +/- 0.0002

[Fri Apr 20 00:41:28 2012] Off-axis axis estimate = 3.92'
[Fri Apr 20 01:19:38 2012] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Fri Apr 20 01:19:38 2012] Initial guess for spatial extent in simple fitting = 0.81"
[Fri Apr 20 01:19:38 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.094
[Fri Apr 20 01:19:38 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.81"
[Fri Apr 20 01:33:05 2012] fullrun_ccd3_acisf12267_pi14-548_cl_pass0_src6.ximg exists
[Fri Apr 20 01:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12267_pi14-548_cl_pass0_src6.csv
[Fri Apr 20 01:33:05 2012] fullrun_ccd3_acisf12267_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Apr 20 01:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12267_pi14-548_cl_pass0_src6.csv
[Fri Apr 20 01:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12267_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12267_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr 20 01:33:05 2012] fullrun_ccd3_acisf12267_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Apr 20 01:33:05 2012] fullrun_ccd3_acisf12267_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Apr 20 01:33:05 2012] Fit fullrun_ccd3_acisf12267_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Apr 20 01:33:11 2012] Spatial fit model total counts = 14.842500, observed total counts = 15.000000
[Fri Apr 20 01:33:11 2012] Offset between fit and detection position for source 5 = 0.603830 pixels
[Fri Apr 20 01:33:11 2012] 15.094240 total counts/ 3.419440 bgd. counts: snr = 6.313526
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.603830 pixels
  Position = (474.0, 478.9) = 6 41 47.24 -49 47 46.5
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 11.7 +/- 3.9
  Background counts = 3.4
  Rate = 0.0006 +/- 0.0002
[Fri Apr 20 01:33:11 2012] Vigneting correction estimate = 1.000000
[Fri Apr 20 01:33:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr 20 01:33:11 2012] Assessing source extent using major axis lower bound
[Fri Apr 20 01:33:11 2012] Source does appear to be extended
[Fri Apr 20 01:33:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr 20 02:02:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr 20 02:02:00 2012] Initial guess for spatial extent in simple fitting = 0.72"
[Fri Apr 20 02:02:00 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.031
[Fri Apr 20 02:02:00 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.72"
[Fri Apr 20 02:10:35 2012] fullrun_ccd3_acisf12267_pi14-548_cl_pass1_src6.ximg exists
[Fri Apr 20 02:10:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12267_pi14-548_cl_pass1_src6.csv
[Fri Apr 20 02:10:35 2012] fullrun_ccd3_acisf12267_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Apr 20 02:10:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12267_pi14-548_cl_pass1_src6.csv
[Fri Apr 20 02:10:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12267_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12267_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr 20 02:10:35 2012] fullrun_ccd3_acisf12267_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Apr 20 02:10:35 2012] fullrun_ccd3_acisf12267_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Apr 20 02:10:35 2012] Fit fullrun_ccd3_acisf12267_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Apr 20 02:10:41 2012] Spatial fit model total counts = 14.826900, observed total counts = 15.000000
[Fri Apr 20 02:10:41 2012] Offset between fit and detection position for source 5 = 0.077777 pixels
[Fri Apr 20 02:10:41 2012] 14.913010 total counts/ 3.583310 bgd. counts: snr = 5.985166
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.077777 pixels
  Position = (474.1, 478.9) = 6 41 47.23 -49 47 46.5
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source counts = 11.3 +/- 3.9
  Background counts = 3.6
  Rate = 0.0006 +/- 0.0002
[Fri Apr 20 02:10:41 2012] Vigneting correction estimate = 1.000000
[Fri Apr 20 02:10:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr 20 02:10:41 2012] Assessing source extent using major axis lower bound
[Fri Apr 20 02:10:41 2012] Source does appear to be extended
[Fri Apr 20 02:10:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr 20 02:22:32 2012] Writing source region out to fullrun_ccd3_acisf12267_pi14-548_pass1_cl_src5_src.reg
[Fri Apr 20 02:22:32 2012] Extracting stamp from image fullrun_ccd3_acisf12267_pi14-548_cl_sm2.00.img.gz, (443, 448) - (505, 510)
[Fri Apr 20 02:22:32 2012] Writing fullrun_ccd3_acisf12267_pi14-548_pass1_cl_src5.gif
[Fri Apr 20 02:25:16 2012] Size of ../../acisf12267/products/events/fullrun_ccd3_acisf12267_pi14-548_pass1_cl_src5_src.evt.gz[events] = 12 counts
[Fri Apr 20 02:25:16 2012] Mean chipx,y = (392.50, 603.75)
[Fri Apr 20 02:25:16 2012] Mean tdetx,y = (4528.25, 3453.50)
[Fri Apr 20 02:25:16 2012] chipx,y range = (381.00-409.00, 584.00-619.00)
[Fri Apr 20 02:25:16 2012] Size of ../../acisf12267/products/events/fullrun_ccd3_acisf12267_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 10 counts
[Fri Apr 20 02:25:17 2012] Not generating rmf since there are only 11 counts
[Fri Apr 20 02:25:17 2012] arf not found, will run specextract
[Fri Apr 20 02:25:42 2012] ../../acisf12267/products/spectra/fullrun_ccd3_acisf12267_pi14-548_pass1_cl_src5.warf not found
[Fri Apr 20 02:25:42 2012] ../../acisf12267/products/spectra/fullrun_ccd3_acisf12267_pi14-548_pass1_cl_src5.wrmf not found
[Fri Apr 20 02:25:42 2012] Removal of ../../acisf12267/products/spectra/fullrun_ccd3_acisf12267_pi14-548_pass1_cl_src5.soff failed
[Fri Apr 20 02:32:42 2012] Spectrum 5 has only 11 counts, deleting rmf
[Fri Apr 20 02:32:42 2012] 190.317
[Fri Apr 20 02:32:46 2012] Updating aperture counts using extracted products
[Fri Apr 20 02:32:46 2012] Error reading totcts from fullrun_ccd3_acisf12267_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Apr 20 02:32:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr 20 02:32:46 2012] Using photon index=1.80, rate=0.000572, arf fullrun_ccd3_acisf12267_pi14-548_pass1_cl_src5.arf
[Fri Apr 20 02:32:46 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Apr 20 02:32:46 2012] Updating source flux to 7.2e-15
[Fri Apr 20 02:32:51 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Apr 20 02:32:52 2012] acisf12267/analysis//spectral/fullrun_ccd3_acisf12267_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete