[Sun Oct  2 08:34:56 2011] Detection parameters:
  Position = (832.0, 903.5) = 5 59 13.60 -52 40 3.8
  Extent = 2.0" x 1.3", rotation angle = 100 degrees
  Source counts = 85.3 +/- 9.6
  Background counts = 6.7
  Rate = 0.002 +/- 0.0002

[Sun Oct  2 08:34:58 2011] Off-axis axis estimate = 7.24'
[Sun Oct  2 08:36:39 2011] Using EEF radius (= 2.33 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 08:36:39 2011] Initial guess for spatial extent in simple fitting = 2.33"
[Sun Oct  2 08:36:39 2011] source mask rpix=4.7, npix_max = 109, mask sum = 110, frac = 1.004
[Sun Oct  2 08:36:39 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.33"
[Sun Oct  2 08:36:40 2011] fullrun_ccd2_acisf12264_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct  2 08:36:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12264_pi14-548_cl_pass0_src3.csv
[Sun Oct  2 08:36:40 2011] fullrun_ccd2_acisf12264_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct  2 08:36:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12264_pi14-548_cl_pass0_src3.csv
[Sun Oct  2 08:36:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12264_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12264_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 08:36:40 2011] fullrun_ccd2_acisf12264_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct  2 08:36:40 2011] fullrun_ccd2_acisf12264_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct  2 08:36:40 2011] Fit fullrun_ccd2_acisf12264_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct  2 08:36:53 2011] Spatial fit model total counts = 93.999400, observed total counts = 94.000000
[Sun Oct  2 08:36:53 2011] Offset between fit and detection position for source 2 = 0.573975 pixels
[Sun Oct  2 08:36:53 2011] 94.285400 total counts/ 19.618600 bgd. counts: snr = 16.857514
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.573975 pixels
  Position = (832.5, 903.7) = 5 59 13.60 -52 40 3.9
  Extent = 1.7 (1.5-2.1)", rotation angle = 0
  Source counts = 74.7 +/- 9.7
  Background counts = 19.6
  Rate = 0.002 +/- 0.0002
[Sun Oct  2 08:36:53 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 08:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 08:36:53 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 08:36:53 2011] Source does appear to be extended
[Sun Oct  2 08:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 08:37:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 08:37:23 2011] Initial guess for spatial extent in simple fitting = 1.71"
[Sun Oct  2 08:37:23 2011] source mask rpix=3.5, npix_max = 63, mask sum = 56, frac = 0.888
[Sun Oct  2 08:37:23 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.71"
[Sun Oct  2 08:37:26 2011] fullrun_ccd2_acisf12264_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct  2 08:37:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12264_pi14-548_cl_pass1_src3.csv
[Sun Oct  2 08:37:26 2011] fullrun_ccd2_acisf12264_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct  2 08:37:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12264_pi14-548_cl_pass1_src3.csv
[Sun Oct  2 08:37:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12264_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12264_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 08:37:26 2011] fullrun_ccd2_acisf12264_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct  2 08:37:26 2011] fullrun_ccd2_acisf12264_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct  2 08:37:26 2011] Fit fullrun_ccd2_acisf12264_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct  2 08:37:44 2011] Spatial fit model total counts = 85.787500, observed total counts = 86.000000
[Sun Oct  2 08:37:44 2011] Offset between fit and detection position for source 2 = 0.264878 pixels
[Sun Oct  2 08:37:44 2011] 86.854800 total counts/ 17.792300 bgd. counts: snr = 16.372924
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.264878 pixels
  Position = (832.3, 903.6) = 5 59 13.61 -52 40 4.0
  Extent = 1.6 (1.2-2.1)", rotation angle = 0
  Source counts = 69.1 +/- 9.3
  Background counts = 17.8
  Rate = 0.002 +/- 0.0002
[Sun Oct  2 08:37:44 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 08:37:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 08:37:44 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 08:37:44 2011] Source does appear to be extended
[Sun Oct  2 08:37:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 08:39:44 2011] Not overwriting source region fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_src.reg
[Sun Oct  2 08:39:44 2011] Extracting stamp from image fullrun_ccd2_acisf12264_pi14-548_cl_sm2.00.img.gz, (757, 829) - (907, 978)
[Sun Oct  2 08:39:44 2011] Writing fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2.gif
[Sun Oct  2 08:40:01 2011] ../../acisf12264/products/events/fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_src.evt and ../../acisf12264/products/events/fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct  2 08:40:01 2011] Size of ../../acisf12264/products/events/fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_src.evt.gz[events] = 90 counts
[Sun Oct  2 08:40:01 2011] Mean chipx,y = (645.98, 193.88)
[Sun Oct  2 08:40:01 2011] Mean tdetx,y = (3254.88, 3440.02)
[Sun Oct  2 08:40:01 2011] chipx,y range = (622.00-666.00, 169.00-220.00)
[Sun Oct  2 08:40:01 2011] Size of ../../acisf12264/products/events/fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 40 counts
[Sun Oct  2 08:40:01 2011] ../../acisf12264/products/images/fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_src.img and ../../acisf12264/products/images/fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct  2 08:40:01 2011] ../../acisf12264/products/spectra/fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_src.pi and ../../acisf12264/products/spectra/fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Oct  2 08:40:01 2011] Not generating rmf since there are only 69 counts
[Sun Oct  2 08:40:05 2011] ../../acisf12264/products/lightcurves/fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_src.lc and ../../acisf12264/products/lightcurves/fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct  2 08:41:12 2011] 164.382
[Sun Oct  2 08:42:31 2011] Updating aperture counts using extracted products
[Sun Oct  2 08:42:31 2011] Error reading totcts from fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct  2 08:42:31 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 08:42:31 2011] Using photon index=1.80, rate=0.00173, arf fullrun_ccd2_acisf12264_pi14-548_pass1_cl_src2.arf
[Sun Oct  2 08:42:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 08:42:31 2011] Updating source flux to 2.5e-14
[Sun Oct  2 08:42:41 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting