[Mon May  6 06:55:14 2013] Detection parameters:
  Position = (307.4, 378.1) = 2 33 5.48 -52 58 36.7
  Extent = 0.5" x 0.5", rotation angle = 84 degrees
  Source counts = 12.7 +/- 3.6
  Background counts = 0.3
  Rate = 0.0006 +/- 0.0002

[Mon May  6 06:55:15 2013] Off-axis axis estimate = 0.50'
[Mon May  6 07:32:09 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon May  6 07:32:09 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Mon May  6 07:32:09 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.891
[Mon May  6 07:32:09 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 0.39"
[Mon May  6 07:47:05 2013] fullrun_ccd3_acisf12263_pi14-548_cl_pass0_src9.ximg exists
[Mon May  6 07:47:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12263_pi14-548_cl_pass0_src9.csv
[Mon May  6 07:47:05 2013] fullrun_ccd3_acisf12263_pi14-548_cl_pass0_src9_1.ximg exists
[Mon May  6 07:47:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12263_pi14-548_cl_pass0_src9.csv
[Mon May  6 07:47:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12263_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12263_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 07:47:05 2013] fullrun_ccd3_acisf12263_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon May  6 07:47:05 2013] fullrun_ccd3_acisf12263_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon May  6 07:47:05 2013] Fit fullrun_ccd3_acisf12263_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon May  6 08:29:37 2013] Spatial fit model total counts = 11.614000, observed total counts = 13.000000
[Mon May  6 08:29:37 2013] Offset between fit and detection position for source 1 = 0.448594 pixels
[Mon May  6 08:29:37 2013] 12.057842 total counts/ 0.020142 bgd. counts: snr = 84.817977
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.448594 pixels
  Position = (307.7, 378.5) = 2 33 5.50 -52 58 36.8
  Extent = 0.6 (0.4-0.9)" x 0.3 (0.2-0.4)", rotation angle = 77 (57-97) degrees
  Source counts = 12.0 +/- 3.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Mon May  6 08:29:37 2013] Vigneting correction estimate = 1.000000
[Mon May  6 08:29:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 08:29:37 2013] Assessing source extent using major axis lower bound
[Mon May  6 08:29:37 2013] Source does appear to be extended
[Mon May  6 08:29:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Mon May  6 09:03:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  6 09:03:12 2013] Initial guess for spatial extent in simple fitting = 0.45"
[Mon May  6 09:03:12 2013] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.117
[Mon May  6 09:03:12 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 0.45"
[Mon May  6 09:16:47 2013] fullrun_ccd3_acisf12263_pi14-548_cl_pass1_src9.ximg exists
[Mon May  6 09:16:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12263_pi14-548_cl_pass1_src9.csv
[Mon May  6 09:16:47 2013] fullrun_ccd3_acisf12263_pi14-548_cl_pass1_src9_1.ximg exists
[Mon May  6 09:16:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12263_pi14-548_cl_pass1_src9.csv
[Mon May  6 09:16:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12263_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12263_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 09:16:47 2013] fullrun_ccd3_acisf12263_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon May  6 09:16:47 2013] fullrun_ccd3_acisf12263_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon May  6 09:16:47 2013] Fit fullrun_ccd3_acisf12263_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon May  6 10:05:11 2013] Spatial fit model total counts = 11.063600, observed total counts = 13.000000
[Mon May  6 10:05:11 2013] Offset between fit and detection position for source 1 = 0.057985 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.057985 pixels
  Position = (307.6, 378.5) = 2 33 5.50 -52 58 36.8
  Extent = 0.6 (0.4-1.0)" x 0.3 (0.2-0.4)", rotation angle = 73 (55-97) degrees
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Mon May  6 10:05:11 2013] Vigneting correction estimate = 1.000000
[Mon May  6 10:05:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 10:05:11 2013] Assessing source extent using major axis lower bound
[Mon May  6 10:05:11 2013] Source does appear to be extended
[Mon May  6 10:05:11 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Mon May  6 10:18:55 2013] Writing source region out to fullrun_ccd3_acisf12263_pi14-548_pass1_cl_src1_src.reg
[Mon May  6 10:18:55 2013] Extracting stamp from image fullrun_ccd3_acisf12263_pi14-548_cl_sm2.00.img.gz, (278, 349) - (337, 408)
[Mon May  6 10:18:55 2013] Writing fullrun_ccd3_acisf12263_pi14-548_pass1_cl_src1.gif
[Mon May  6 10:23:24 2013] Size of ../../acisf12263/products/events/fullrun_ccd3_acisf12263_pi14-548_pass1_cl_src1_src.evt.gz[events] = 12 counts
[Mon May  6 10:23:24 2013] Mean chipx,y = (570.67, 1002.67)
[Mon May  6 10:23:24 2013] Mean tdetx,y = (4129.33, 3631.67)
[Mon May  6 10:23:24 2013] chipx,y range = (556.00-586.00, 985.00-1018.00)
[Mon May  6 10:23:24 2013] Size of ../../acisf12263/products/events/fullrun_ccd3_acisf12263_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 4 counts
[Mon May  6 10:23:25 2013] Not generating rmf since there are only 11 counts
[Mon May  6 10:23:25 2013] arf not found, will run specextract
[Mon May  6 10:23:55 2013] ../../acisf12263/products/spectra/fullrun_ccd3_acisf12263_pi14-548_pass1_cl_src1.warf not found
[Mon May  6 10:23:55 2013] ../../acisf12263/products/spectra/fullrun_ccd3_acisf12263_pi14-548_pass1_cl_src1.wrmf not found
[Mon May  6 10:23:55 2013] Removal of ../../acisf12263/products/spectra/fullrun_ccd3_acisf12263_pi14-548_pass1_cl_src1.soff failed
[Mon May  6 10:28:29 2013] Spectrum 1 has only 12 counts, deleting rmf
[Mon May  6 10:28:29 2013] 198.474
[Mon May  6 10:30:38 2013] Updating aperture counts using extracted products
[Mon May  6 10:30:38 2013] Total counts from fullrun_ccd3_acisf12263_pi14-548_pass1_cl_src1_src.pi.gz = 12.00
[Mon May  6 10:30:38 2013] Total counts from fullrun_ccd3_acisf12263_pi14-548_pass1_cl_src1_bgd.pi.gz = 4.00
[Mon May  6 10:30:38 2013] Got source and background scale factors 0.000001, 0.000015
[Mon May  6 10:30:38 2013] User source parameters:
  Position = (307.6, 378.5) = 2 33 5.50 -52 58 36.8
  Extent = 0.6 (0.4-1.0)" x 0.3 (0.2-0.4)", rotation angle = 73 (55-97) degrees
  Source aperture counts = 11.9 +/- 4.6
  Background aperture counts = 0.1
  Rate = 0.0006 +/- 0.0002

[Mon May  6 10:30:39 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 10:30:39 2013] Using photon index=1.80, rate=0.000582, arf fullrun_ccd3_acisf12263_pi14-548_pass1_cl_src1.arf
[Mon May  6 10:30:39 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May  6 10:30:39 2013] Updating source flux to 6.9e-15
[Mon May  6 10:30:48 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting