[Sat May 11 12:08:46 2013] Detection parameters:
  Position = (1002.4, 773.7) = 2 45 44.79 -53 7 40.6
  Extent = 0.5" x 0.5", rotation angle = 106 degrees
  Source counts = 11.8 +/- 3.5
  Background counts = 0.2
  Rate = 0.0006 +/- 0.0002

[Sat May 11 12:08:46 2013] Off-axis axis estimate = 2.64'
[Sat May 11 12:59:17 2013] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Sat May 11 12:59:17 2013] Initial guess for spatial extent in simple fitting = 0.52"
[Sat May 11 12:59:17 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.940
[Sat May 11 12:59:17 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 0.52"
[Sat May 11 13:04:12 2013] fullrun_ccd2_acisf12260_pi14-548_cl_pass0_src4.ximg exists
[Sat May 11 13:04:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12260_pi14-548_cl_pass0_src4.csv
[Sat May 11 13:04:12 2013] fullrun_ccd2_acisf12260_pi14-548_cl_pass0_src4_1.ximg exists
[Sat May 11 13:04:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12260_pi14-548_cl_pass0_src4.csv
[Sat May 11 13:04:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12260_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12260_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 13:04:12 2013] fullrun_ccd2_acisf12260_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sat May 11 13:04:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12260_pi14-548_cl_pass0_tfrozen_src4.csv
[Sat May 11 13:04:12 2013] fullrun_ccd2_acisf12260_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May 11 13:04:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12260_pi14-548_cl_pass0_tfrozen_src4.csv
[Sat May 11 13:04:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12260_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12260_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 13:41:42 2013] Spatial fit model total counts = 11.770700, observed total counts = 13.000000
[Sat May 11 13:41:42 2013] Offset between fit and detection position for source 2 = 0.699584 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.699584 pixels
  Position = (1002.9, 774.2) = 2 45 44.79 -53 7 40.6
  Extent = 0.5 (0.4-0.8)" x 0.2 (0.2-0.3)", rotation angle = 73 (90-90) degrees
  Source counts = 11.4 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sat May 11 13:41:42 2013] Vigneting correction estimate = 1.000000
[Sat May 11 13:41:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 13:41:42 2013] Assessing source extent using major axis lower bound
[Sat May 11 13:41:42 2013] Source does appear to be extended
[Sat May 11 13:41:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Sat May 11 14:22:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 14:22:36 2013] Initial guess for spatial extent in simple fitting = 0.37"
[Sat May 11 14:22:36 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.635
[Sat May 11 14:22:36 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 0.37"
[Sat May 11 14:27:12 2013] fullrun_ccd2_acisf12260_pi14-548_cl_pass1_src4.ximg exists
[Sat May 11 14:27:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12260_pi14-548_cl_pass1_src4.csv
[Sat May 11 14:27:12 2013] fullrun_ccd2_acisf12260_pi14-548_cl_pass1_src4_1.ximg exists
[Sat May 11 14:27:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12260_pi14-548_cl_pass1_src4.csv
[Sat May 11 14:27:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12260_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12260_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 14:27:12 2013] fullrun_ccd2_acisf12260_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sat May 11 14:27:12 2013] fullrun_ccd2_acisf12260_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 11 14:27:12 2013] Fit fullrun_ccd2_acisf12260_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sat May 11 15:06:09 2013] Spatial fit model total counts = 11.974700, observed total counts = 13.000000
[Sat May 11 15:06:09 2013] Offset between fit and detection position for source 2 = 0.016257 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016257 pixels
  Position = (1002.9, 774.2) = 2 45 44.79 -53 7 40.6
  Extent = 0.5 (0.4-0.8)" x 0.2 (0.2-0.3)", rotation angle = 74 (54-92) degrees
  Source counts = 11.6 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sat May 11 15:06:09 2013] Vigneting correction estimate = 1.000000
[Sat May 11 15:06:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 15:06:09 2013] Assessing source extent using major axis lower bound
[Sat May 11 15:06:09 2013] Source does appear to be extended
[Sat May 11 15:06:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Sat May 11 15:17:38 2013] Writing source region out to fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2_src.reg
[Sat May 11 15:17:38 2013] Extracting stamp from image fullrun_ccd2_acisf12260_pi14-548_cl_sm2.00.img.gz, (980, 751) - (1026, 797)
[Sat May 11 15:17:38 2013] Writing fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2.gif
[Sat May 11 15:19:34 2013] Size of ../../acisf12260/products/events/fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2_src.evt.gz[events] = 12 counts
[Sat May 11 15:19:34 2013] Mean chipx,y = (291.17, 745.67)
[Sat May 11 15:19:34 2013] Mean tdetx,y = (3806.67, 3794.83)
[Sat May 11 15:19:34 2013] chipx,y range = (275.00-307.00, 727.00-760.00)
[Sat May 11 15:19:34 2013] Size of ../../acisf12260/products/events/fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 2 counts
[Sat May 11 15:19:35 2013] Not generating rmf since there are only 11 counts
[Sat May 11 15:19:35 2013] arf not found, will run specextract
[Sat May 11 15:20:03 2013] ../../acisf12260/products/spectra/fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2.warf not found
[Sat May 11 15:20:03 2013] ../../acisf12260/products/spectra/fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2.wrmf not found
[Sat May 11 15:20:03 2013] Removal of ../../acisf12260/products/spectra/fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2.soff failed
[Sat May 11 15:24:28 2013] Spectrum 2 has only 12 counts, deleting rmf
[Sat May 11 15:24:28 2013] 196.461
[Sat May 11 15:35:41 2013] Updating aperture counts using extracted products
[Sat May 11 15:35:41 2013] Total counts from fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2_src.pi.gz = 12.00
[Sat May 11 15:35:41 2013] Total counts from fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2_bgd.pi.gz = 2.00
[Sat May 11 15:35:41 2013] Got source and background scale factors 0.000000, 0.000009
[Sat May 11 15:35:41 2013] User source parameters:
  Position = (1002.9, 774.2) = 2 45 44.79 -53 7 40.6
  Extent = 0.5 (0.4-0.8)" x 0.2 (0.2-0.3)", rotation angle = 74 (54-92) degrees
  Source aperture counts = 11.9 +/- 4.6
  Background aperture counts = 0.1
  Rate = 0.0006 +/- 0.0002

[Sat May 11 15:35:42 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 15:35:42 2013] Using photon index=1.80, rate=0.000587, arf fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2.arf
[Sat May 11 15:35:42 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 15:35:42 2013] Updating source flux to 6.9e-15
[Sat May 11 15:35:50 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 11 15:35:51 2013] acisf12260/analysis//spectral/fullrun_ccd2_acisf12260_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete