[Wed Feb 29 00:38:27 2012] Detection parameters:
  Position = (418.4, 507.7) = 4 38 32.91 -54 19 10.2
  Extent = 0.6" x 0.5", rotation angle = 138 degrees
  Source counts = 22.4 +/- 4.8
  Background counts = 0.6
  Rate = 0.001 +/- 0.0002

[Wed Feb 29 00:38:27 2012] Off-axis axis estimate = 3.74'
[Wed Feb 29 01:11:37 2012] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 01:11:37 2012] Initial guess for spatial extent in simple fitting = 0.75"
[Wed Feb 29 01:11:37 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.967
[Wed Feb 29 01:11:37 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.75"
[Wed Feb 29 01:20:33 2012] fullrun_ccd3_acisf12259_pi14-548_cl_pass0_src3.ximg exists
[Wed Feb 29 01:20:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12259_pi14-548_cl_pass0_src3.csv
[Wed Feb 29 01:20:33 2012] fullrun_ccd3_acisf12259_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Feb 29 01:20:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12259_pi14-548_cl_pass0_src3.csv
[Wed Feb 29 01:20:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12259_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12259_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 01:20:33 2012] fullrun_ccd3_acisf12259_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Feb 29 01:20:33 2012] fullrun_ccd3_acisf12259_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Feb 29 01:20:33 2012] Fit fullrun_ccd3_acisf12259_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Feb 29 01:27:14 2012] Spatial fit model total counts = 21.271400, observed total counts = 23.000000
[Wed Feb 29 01:27:14 2012] Offset between fit and detection position for source 2 = 0.644287 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.644287 pixels
  Position = (418.8, 508.2) = 4 38 32.92 -54 19 10.2
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 21.7 +/- 4.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Wed Feb 29 01:27:14 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 01:27:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 01:27:14 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 01:27:14 2012] Source does appear to be extended
[Wed Feb 29 01:27:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 01:53:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 01:53:48 2012] Initial guess for spatial extent in simple fitting = 0.67"
[Wed Feb 29 01:53:48 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.160
[Wed Feb 29 01:53:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.67"
[Wed Feb 29 02:00:59 2012] fullrun_ccd3_acisf12259_pi14-548_cl_pass1_src3.ximg exists
[Wed Feb 29 02:00:59 2012] fullrun_ccd3_acisf12259_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Feb 29 02:00:59 2012] Fit fullrun_ccd3_acisf12259_pi14-548_cl_pass1_src3 appears to have run properly
[Wed Feb 29 02:00:59 2012] fullrun_ccd3_acisf12259_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Feb 29 02:00:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12259_pi14-548_cl_pass1_tfrozen_src3.csv
[Wed Feb 29 02:00:59 2012] fullrun_ccd3_acisf12259_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Feb 29 02:00:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12259_pi14-548_cl_pass1_tfrozen_src3.csv
[Wed Feb 29 02:00:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12259_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12259_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 02:08:53 2012] Spatial fit model total counts = 20.715500, observed total counts = 23.000000
[Wed Feb 29 02:08:53 2012] Offset between fit and detection position for source 2 = 0.104343 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.104343 pixels
  Position = (418.7, 508.1) = 4 38 32.92 -54 19 10.2
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 21.2 +/- 4.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Wed Feb 29 02:08:53 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 02:08:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 02:08:53 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 02:08:53 2012] Source does appear to be extended
[Wed Feb 29 02:08:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 02:22:54 2012] Writing source region out to fullrun_ccd3_acisf12259_pi14-548_pass1_cl_src2_src.reg
[Wed Feb 29 02:22:54 2012] Extracting stamp from image fullrun_ccd3_acisf12259_pi14-548_cl_sm2.00.img.gz, (389, 478) - (448, 538)
[Wed Feb 29 02:22:54 2012] Writing fullrun_ccd3_acisf12259_pi14-548_pass1_cl_src2.gif
[Wed Feb 29 02:24:21 2012] Size of ../../acisf12259/products/events/fullrun_ccd3_acisf12259_pi14-548_pass1_cl_src2_src.evt.gz[events] = 23 counts
[Wed Feb 29 02:24:21 2012] Mean chipx,y = (342.74, 663.52)
[Wed Feb 29 02:24:21 2012] Mean tdetx,y = (4468.48, 3403.74)
[Wed Feb 29 02:24:21 2012] chipx,y range = (325.00-358.00, 646.00-681.00)
[Wed Feb 29 02:24:21 2012] Size of ../../acisf12259/products/events/fullrun_ccd3_acisf12259_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 7 counts
[Wed Feb 29 02:24:22 2012] Not generating rmf since there are only 21 counts
[Wed Feb 29 02:24:22 2012] arf not found, will run specextract
[Wed Feb 29 02:24:53 2012] ../../acisf12259/products/spectra/fullrun_ccd3_acisf12259_pi14-548_pass1_cl_src2.warf not found
[Wed Feb 29 02:24:53 2012] ../../acisf12259/products/spectra/fullrun_ccd3_acisf12259_pi14-548_pass1_cl_src2.wrmf not found
[Wed Feb 29 02:24:53 2012] Removal of ../../acisf12259/products/spectra/fullrun_ccd3_acisf12259_pi14-548_pass1_cl_src2.soff failed
[Wed Feb 29 02:27:44 2012] Spectrum 2 has only 21 counts, deleting rmf
[Wed Feb 29 02:27:44 2012] 190.094
[Wed Feb 29 02:28:31 2012] Updating aperture counts using extracted products
[Wed Feb 29 02:28:31 2012] Error reading totcts from fullrun_ccd3_acisf12259_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Feb 29 02:28:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 02:28:31 2012] Using photon index=1.80, rate=0.00107, arf fullrun_ccd3_acisf12259_pi14-548_pass1_cl_src2.arf
[Wed Feb 29 02:28:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 02:28:31 2012] Updating source flux to 1.4e-14
[Wed Feb 29 02:28:39 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting