[Thu Feb  9 18:33:36 2012] Detection parameters:
  Position = (485.7, 508.3) = 1 3 1.17 -49 14 24.5
  Extent = 0.8" x 0.6", rotation angle = 107 degrees
  Source counts = 413.9 +/- 20.5
  Background counts = 7.1
  Rate = 0.007 +/- 0.0003

[Thu Feb  9 18:33:36 2012] Off-axis axis estimate = 4.19'
[Thu Feb  9 20:00:25 2012] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Thu Feb  9 20:00:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb  9 20:00:25 2012] Initial guess for spatial extent in simple fitting = 0.89"
[Thu Feb  9 20:00:25 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.176
[Thu Feb  9 20:00:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.89"
[Thu Feb  9 20:29:29 2012] fullrun_ccd3_acisf12258_pi14-548_cl_pass0_src1.ximg exists
[Thu Feb  9 20:29:29 2012] fullrun_ccd3_acisf12258_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Feb  9 20:29:29 2012] Fit fullrun_ccd3_acisf12258_pi14-548_cl_pass0_src1 appears to have run properly
[Thu Feb  9 20:29:29 2012] fullrun_ccd3_acisf12258_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb  9 20:29:29 2012] fullrun_ccd3_acisf12258_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb  9 20:29:29 2012] Fit fullrun_ccd3_acisf12258_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb  9 21:24:02 2012] Spatial fit model total counts = 385.644000, observed total counts = 424.000000
[Thu Feb  9 21:24:02 2012] Offset between fit and detection position for source 2 = 0.634817 pixels
[Thu Feb  9 21:24:02 2012] 385.924800 total counts/ 28.112800 bgd. counts: snr = 67.484316
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.634817 pixels
  Position = (486.2, 508.7) = 1 3 1.17 -49 14 24.6
  Extent = 1.0" x 0.7", rotation angle = 71
  Source counts = 357.8 +/- 19.6
  Background counts = 28.1
  Rate = 0.006 +/- 0.0003
[Thu Feb  9 21:24:03 2012] Vigneting correction estimate = 1.000000
[Thu Feb  9 21:24:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  9 21:24:03 2012] Assessing source extent using major
[Thu Feb  9 21:24:03 2012] Source does appear to be extended
[Thu Feb  9 21:24:03 2012] Computing asymmetry using major and minor axis, asym = 1.50
[Thu Feb  9 21:24:03 2012] Source is asymmetric
[Thu Feb  9 22:33:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb  9 22:33:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb  9 22:33:41 2012] Initial guess for spatial extent in simple fitting = 0.86"
[Thu Feb  9 22:33:41 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.996
[Thu Feb  9 22:33:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.86"
[Thu Feb  9 22:59:29 2012] fullrun_ccd3_acisf12258_pi14-548_cl_pass1_src1.ximg exists
[Thu Feb  9 22:59:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12258_pi14-548_cl_pass1_src1.csv
[Thu Feb  9 22:59:29 2012] fullrun_ccd3_acisf12258_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Feb  9 22:59:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12258_pi14-548_cl_pass1_src1.csv
[Thu Feb  9 22:59:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12258_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12258_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  9 22:59:30 2012] fullrun_ccd3_acisf12258_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb  9 22:59:30 2012] fullrun_ccd3_acisf12258_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb  9 22:59:30 2012] Fit fullrun_ccd3_acisf12258_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb  9 23:51:02 2012] Spatial fit model total counts = 422.951000, observed total counts = 423.000000
[Thu Feb  9 23:51:02 2012] Offset between fit and detection position for source 2 = 0.255170 pixels
[Thu Feb  9 23:51:02 2012] 423.583300 total counts/ 68.029300 bgd. counts: snr = 43.107970
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.255170 pixels
  Position = (486.1, 508.9) = 1 3 1.17 -49 14 24.5
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 355.6 +/- 20.6
  Background counts = 68.0
  Rate = 0.006 +/- 0.0003
[Thu Feb  9 23:51:02 2012] Vigneting correction estimate = 1.000000
[Thu Feb  9 23:51:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  9 23:51:02 2012] Assessing source extent using major axis lower bound
[Thu Feb  9 23:51:02 2012] Source does appear to be extended
[Thu Feb  9 23:51:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 00:18:56 2012] Writing source region out to fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2_src.reg
[Fri Feb 10 00:18:56 2012] Extracting stamp from image fullrun_ccd3_acisf12258_pi14-548_cl_sm2.00.img.gz, (453, 475) - (520, 542)
[Fri Feb 10 00:18:56 2012] Writing fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2.gif
[Fri Feb 10 00:18:58 2012] Size of ../../acisf12258/products/events/fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2_src.evt.gz[events] = 409 counts
[Fri Feb 10 00:18:58 2012] Mean chipx,y = (437.28, 552.60)
[Fri Feb 10 00:18:58 2012] Mean tdetx,y = (4579.40, 3498.28)
[Fri Feb 10 00:18:58 2012] chipx,y range = (416.00-459.00, 530.00-576.00)
[Fri Feb 10 00:18:58 2012] Size of ../../acisf12258/products/events/fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 25 counts
[Fri Feb 10 00:18:59 2012] rmf not found, will run specextract
[Fri Feb 10 00:18:59 2012] arf not found, will run specextract
[Fri Feb 10 00:19:30 2012] ../../acisf12258/products/spectra/fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2.warf not found
[Fri Feb 10 00:19:30 2012] ../../acisf12258/products/spectra/fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2.wrmf not found
[Fri Feb 10 00:19:30 2012] Removal of ../../acisf12258/products/spectra/fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2.soff failed
[Fri Feb 10 00:32:48 2012] Keeping rmf generated by specextract
[Fri Feb 10 00:32:48 2012] 190.176
[Fri Feb 10 00:36:21 2012] Updating aperture counts using extracted products
[Fri Feb 10 00:36:21 2012] Error reading totcts from fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Feb 10 00:36:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 00:36:21 2012] Using photon index=1.80, rate=0.006, arf fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2.arf
[Fri Feb 10 00:36:21 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 10 00:36:21 2012] Updating source flux to 7.6e-14
[Fri Feb 10 00:36:47 2012] Reading fit data from acisf12258/analysis//spectral/fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2_pl.csv
[Fri Feb 10 00:36:47 2012] Spectral fit parameter nH value = 5.92722e+14
[Fri Feb 10 00:36:47 2012] Spectral fit parameter PhoIndex value = 1.41695
[Fri Feb 10 00:36:47 2012] Failed to get F(0.3-8.0) from acisf12258/analysis//spectral/fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Feb 10 00:36:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 00:36:47 2012] Using Nh = 5.9e+14, photon index=1.42, rate=0.006, arf fullrun_ccd3_acisf12258_pi14-548_pass1_cl_src2.arf
[Fri Feb 10 00:36:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 10 00:36:47 2012] Updating source flux to 8.5e-14