[Wed Sep 28 17:15:12 2011] Detection parameters:
  Position = (171.7, 786.7) = 0 6 33.91 10 49 22.0
  Extent = 1.7" x 1.1", rotation angle = 163 degrees
  Source counts = 243.4 +/- 15.9
  Background counts = 10.6
  Rate = 0.009 +/- 0.0006

[Wed Sep 28 17:15:12 2011] Off-axis axis estimate = 6.53'
[Wed Sep 28 17:16:06 2011] Using EEF radius (= 1.91 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:16:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 17:16:06 2011] Initial guess for spatial extent in simple fitting = 1.91"
[Wed Sep 28 17:16:06 2011] source mask rpix=3.9, npix_max = 76, mask sum = 81, frac = 1.054
[Wed Sep 28 17:16:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.91"
[Wed Sep 28 17:16:06 2011] fullrun_ccd3_acisf12251_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 17:16:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12251_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 17:16:06 2011] fullrun_ccd3_acisf12251_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 17:16:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12251_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 17:16:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12251_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12251_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:16:07 2011] fullrun_ccd3_acisf12251_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 17:16:07 2011] fullrun_ccd3_acisf12251_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 17:16:07 2011] Fit fullrun_ccd3_acisf12251_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 17:16:16 2011] Spatial fit model total counts = 255.241000, observed total counts = 254.000000
[Wed Sep 28 17:16:16 2011] Offset between fit and detection position for source 2 = 0.781077 pixels
[Wed Sep 28 17:16:16 2011] 255.114900 total counts/ 18.697900 bgd. counts: snr = 54.674181
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.781077 pixels
  Position = (172.0, 787.5) = 0 6 33.91 10 49 22.1
  Extent = 1.6 (1.5-1.8)", rotation angle = 0
  Source counts = 236.4 +/- 16.0
  Background counts = 18.7
  Rate = 0.009 +/- 0.0006
[Wed Sep 28 17:16:16 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:16:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:16:16 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:16:16 2011] Source does appear to be extended
[Wed Sep 28 17:16:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:16:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:16:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 17:16:34 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Wed Sep 28 17:16:34 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.950
[Wed Sep 28 17:16:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.64"
[Wed Sep 28 17:16:38 2011] fullrun_ccd3_acisf12251_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 17:16:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12251_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 17:16:38 2011] fullrun_ccd3_acisf12251_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 17:16:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12251_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 17:16:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12251_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12251_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:16:39 2011] fullrun_ccd3_acisf12251_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 17:16:39 2011] fullrun_ccd3_acisf12251_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 17:16:39 2011] Fit fullrun_ccd3_acisf12251_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 17:16:51 2011] Spatial fit model total counts = 250.999000, observed total counts = 251.000000
[Wed Sep 28 17:16:51 2011] Offset between fit and detection position for source 2 = 0.056080 pixels
[Wed Sep 28 17:16:51 2011] 250.541500 total counts/ 19.338500 bgd. counts: snr = 52.575338
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.056080 pixels
  Position = (172.1, 787.5) = 0 6 33.91 10 49 22.1
  Extent = 1.6 (1.4-1.8)", rotation angle = 0
  Source counts = 231.2 +/- 15.8
  Background counts = 19.3
  Rate = 0.009 +/- 0.0006
[Wed Sep 28 17:16:51 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:16:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:16:51 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:16:51 2011] Source does appear to be extended
[Wed Sep 28 17:16:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:18:58 2011] Not overwriting source region fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 28 17:18:58 2011] Extracting stamp from image fullrun_ccd3_acisf12251_pi14-548_cl_sm2.00.img.gz, (98, 714) - (246, 861)
[Wed Sep 28 17:18:58 2011] Writing fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2.gif
[Wed Sep 28 17:18:59 2011] ../../acisf12251/products/events/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_src.evt and ../../acisf12251/products/events/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 28 17:18:59 2011] Size of ../../acisf12251/products/events/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_src.evt.gz[events] = 247 counts
[Wed Sep 28 17:18:59 2011] Mean chipx,y = (999.71, 249.96)
[Wed Sep 28 17:18:59 2011] Mean tdetx,y = (4882.04, 4060.71)
[Wed Sep 28 17:18:59 2011] chipx,y range = (973.00-1021.00, 227.00-272.00)
[Wed Sep 28 17:18:59 2011] Size of ../../acisf12251/products/events/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 46 counts
[Wed Sep 28 17:18:59 2011] ../../acisf12251/products/images/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_src.img and ../../acisf12251/products/images/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 28 17:18:59 2011] ../../acisf12251/products/spectra/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_src.pi and ../../acisf12251/products/spectra/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Sep 28 17:19:01 2011] ../../acisf12251/products/lightcurves/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_src.lc and ../../acisf12251/products/lightcurves/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 28 17:19:47 2011] Keeping rmf generated by specextract
[Wed Sep 28 17:19:47 2011] 182.898
[Wed Sep 28 17:19:54 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:19:54 2011] Error reading totcts from fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 28 17:19:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:19:54 2011] Using photon index=1.80, rate=0.00866, arf fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 17:19:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:19:54 2011] Updating source flux to 1.1e-13
[Wed Sep 28 17:20:07 2011] Reading fit data from acisf12251/analysis//spectral/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_pl.csv
[Wed Sep 28 17:20:07 2011] Spectral fit parameter nH value = 3.80041e+14
[Wed Sep 28 17:20:07 2011] Spectral fit parameter PhoIndex value = 1.28609
[Wed Sep 28 17:20:07 2011] Failed to get F(0.3-8.0) from acisf12251/analysis//spectral/fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 17:20:07 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:20:07 2011] Using Nh = 3.8e+14, photon index=1.29, rate=0.00866, arf fullrun_ccd3_acisf12251_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 17:20:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:20:07 2011] Updating source flux to 1.3e-13