[Sun Mar 25 10:19:05 2012] Detection parameters:
  Position = (990.5, 797.3) = 9 42 17.25 15 25 33.7
  Extent = 0.5" x 0.5", rotation angle = 100 degrees
  Source counts = 10.2 +/- 3.3
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Sun Mar 25 10:19:05 2012] Off-axis axis estimate = 4.33'
[Sun Mar 25 10:47:37 2012] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 10:47:37 2012] Initial guess for spatial extent in simple fitting = 0.93"
[Sun Mar 25 10:47:37 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.088
[Sun Mar 25 10:47:37 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 0.93"
[Sun Mar 25 10:56:52 2012] fullrun_ccd3_acisf12250_pi14-548_cl_pass0_src8.ximg exists
[Sun Mar 25 10:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12250_pi14-548_cl_pass0_src8.csv
[Sun Mar 25 10:56:52 2012] fullrun_ccd3_acisf12250_pi14-548_cl_pass0_src8_1.ximg exists
[Sun Mar 25 10:56:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12250_pi14-548_cl_pass0_src8.csv
[Sun Mar 25 10:56:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12250_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12250_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 10:56:52 2012] fullrun_ccd3_acisf12250_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sun Mar 25 10:56:52 2012] fullrun_ccd3_acisf12250_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Mar 25 10:56:52 2012] Fit fullrun_ccd3_acisf12250_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Mar 25 11:02:33 2012] Spatial fit model total counts = 14.079600, observed total counts = 15.000000
[Sun Mar 25 11:02:33 2012] Offset between fit and detection position for source 4 = 1.128257 pixels
[Sun Mar 25 11:02:33 2012] 14.671180 total counts/ 7.026760 bgd. counts: snr = 2.883812
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.128257 pixels
  Position = (991.4, 797.9) = 9 42 17.23 15 25 33.8
  Extent = 0.4 (0.2-0.5)", rotation angle = 0
  Source counts = 7.6 +/- 3.8
  Background counts = 7.0
  Rate = 0.0003 +/- 0.0002
[Sun Mar 25 11:02:33 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:02:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:02:33 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 11:02:33 2012] Source does appear to be extended
[Sun Mar 25 11:02:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 11:34:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 11:34:28 2012] Initial guess for spatial extent in simple fitting = 0.36"
[Sun Mar 25 11:34:28 2012] Spatial fitting skipped for pass 1: source                                 has 7.6 net counts, is at off-axis angle 4.3'
[Sun Mar 25 11:49:10 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:49:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:49:10 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 11:49:10 2012] Source does appear to be extended
[Sun Mar 25 11:49:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 12:03:34 2012] Writing source region out to fullrun_ccd3_acisf12250_pi14-548_pass1_cl_src4_src.reg
[Sun Mar 25 12:03:34 2012] Extracting stamp from image fullrun_ccd3_acisf12250_pi14-548_cl_sm2.00.img.gz, (975, 782) - (1008, 814)
[Sun Mar 25 12:03:34 2012] Writing fullrun_ccd3_acisf12250_pi14-548_pass1_cl_src4.gif
[Sun Mar 25 12:07:45 2012] Size of ../../acisf12250/products/events/fullrun_ccd3_acisf12250_pi14-548_pass1_cl_src4_src.evt.gz[events] = 10 counts
[Sun Mar 25 12:07:45 2012] Mean chipx,y = (869.70, 520.90)
[Sun Mar 25 12:07:45 2012] Mean tdetx,y = (4611.10, 3930.70)
[Sun Mar 25 12:07:45 2012] chipx,y range = (851.00-884.00, 507.00-532.00)
[Sun Mar 25 12:07:45 2012] Size of ../../acisf12250/products/events/fullrun_ccd3_acisf12250_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 4 counts
[Sun Mar 25 12:07:46 2012] Not generating rmf since there are only 7 counts
[Sun Mar 25 12:07:46 2012] arf not found, will run specextract
[Sun Mar 25 12:08:09 2012] ../../acisf12250/products/spectra/fullrun_ccd3_acisf12250_pi14-548_pass1_cl_src4.warf not found
[Sun Mar 25 12:08:09 2012] ../../acisf12250/products/spectra/fullrun_ccd3_acisf12250_pi14-548_pass1_cl_src4.wrmf not found
[Sun Mar 25 12:08:09 2012] Removal of ../../acisf12250/products/spectra/fullrun_ccd3_acisf12250_pi14-548_pass1_cl_src4.soff failed
[Sun Mar 25 12:12:00 2012] Spectrum 4 has only 8 counts, deleting rmf
[Sun Mar 25 12:12:00 2012] 193.896
[Sun Mar 25 12:12:48 2012] Updating aperture counts using extracted products
[Sun Mar 25 12:12:48 2012] Error reading totcts from fullrun_ccd3_acisf12250_pi14-548_pass1_cl_src4_src.pi.gz
[Sun Mar 25 12:12:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 12:12:49 2012] Using photon index=1.80, rate=0.000303, arf fullrun_ccd3_acisf12250_pi14-548_pass1_cl_src4.arf
[Sun Mar 25 12:12:49 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Mar 25 12:12:49 2012] Updating source flux to 3.7e-15
[Sun Mar 25 12:12:54 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Mar 25 12:12:55 2012] acisf12250/analysis//spectral/fullrun_ccd3_acisf12250_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete