[Tue Feb 14 00:28:58 2012] Detection parameters:
  Position = (1118.2, 467.7) = 22 26 54.95 25 48 42.0
  Extent = 0.7" x 0.5", rotation angle = 169 degrees
  Source counts = 15.6 +/- 4.2
  Background counts = 2.4
  Rate = 0.0006 +/- 0.0002

[Tue Feb 14 00:28:59 2012] Off-axis axis estimate = 1.67'
[Tue Feb 14 01:18:35 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 01:18:35 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Feb 14 01:18:35 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.294
[Tue Feb 14 01:18:35 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.40"
[Tue Feb 14 01:33:21 2012] fullrun_ccd3_acisf12249_pi14-548_cl_pass0_src10.ximg exists
[Tue Feb 14 01:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12249_pi14-548_cl_pass0_src10.csv
[Tue Feb 14 01:33:21 2012] fullrun_ccd3_acisf12249_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Feb 14 01:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12249_pi14-548_cl_pass0_src10.csv
[Tue Feb 14 01:33:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12249_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12249_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 01:33:21 2012] fullrun_ccd3_acisf12249_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Feb 14 01:33:21 2012] fullrun_ccd3_acisf12249_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Feb 14 01:33:21 2012] Fit fullrun_ccd3_acisf12249_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Feb 14 01:33:29 2012] Source 3 is offset by 0.363123 and -0.951432 pixels which is larger than
2 X fitted extent = 3.981894 x 0.913593, not incorporating fit results
[Tue Feb 14 01:33:29 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 01:33:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 01:33:29 2012] Assessing source extent using major
[Tue Feb 14 01:33:29 2012] Source does appear to be extended
[Tue Feb 14 01:33:29 2012] Computing asymmetry using major and minor axis, asym = 1.47
[Tue Feb 14 02:22:00 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 02:22:00 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Feb 14 02:22:00 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.294
[Tue Feb 14 02:22:00 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.40"
[Tue Feb 14 02:36:34 2012] fullrun_ccd3_acisf12249_pi14-548_cl_pass1_src10.ximg exists
[Tue Feb 14 02:36:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12249_pi14-548_cl_pass1_src10.csv
[Tue Feb 14 02:36:34 2012] fullrun_ccd3_acisf12249_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Feb 14 02:36:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12249_pi14-548_cl_pass1_src10.csv
[Tue Feb 14 02:36:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12249_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12249_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 02:36:34 2012] fullrun_ccd3_acisf12249_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Feb 14 02:36:34 2012] fullrun_ccd3_acisf12249_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Feb 14 02:36:34 2012] Fit fullrun_ccd3_acisf12249_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Feb 14 02:36:42 2012] Spatial fit model total counts = 23.882500, observed total counts = 24.000000
[Tue Feb 14 02:36:42 2012] Offset between fit and detection position for source 3 = 0.936429 pixels
[Tue Feb 14 02:36:42 2012] 24.740600 total counts/ 11.057800 bgd. counts: snr = 4.114723
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.936429 pixels
  Position = (1118.8, 468.5) = 22 26 54.95 25 48 42.1
  Extent = 0.5 (0.3-1.0)", rotation angle = 0
  Source counts = 13.7 +/- 5.0
  Background counts = 11.1
  Rate = 0.0005 +/- 0.0002
[Tue Feb 14 02:36:42 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 02:36:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 02:36:42 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 02:36:42 2012] Source does appear to be extended
[Tue Feb 14 02:36:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 02:56:56 2012] Writing source region out to fullrun_ccd3_acisf12249_pi14-548_pass1_cl_src3_src.reg
[Tue Feb 14 02:56:56 2012] Extracting stamp from image fullrun_ccd3_acisf12249_pi14-548_cl_sm2.00.img.gz, (1094, 444) - (1143, 493)
[Tue Feb 14 02:56:56 2012] Writing fullrun_ccd3_acisf12249_pi14-548_pass1_cl_src3.gif
[Tue Feb 14 03:02:27 2012] Size of ../../acisf12249/products/events/fullrun_ccd3_acisf12249_pi14-548_pass1_cl_src3_src.evt.gz[events] = 16 counts
[Tue Feb 14 03:02:27 2012] Mean chipx,y = (571.06, 987.12)
[Tue Feb 14 03:02:27 2012] Mean tdetx,y = (4144.88, 3632.06)
[Tue Feb 14 03:02:27 2012] chipx,y range = (560.00-593.00, 973.00-1008.00)
[Tue Feb 14 03:02:27 2012] Size of ../../acisf12249/products/events/fullrun_ccd3_acisf12249_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 23 counts
[Tue Feb 14 03:02:28 2012] Not generating rmf since there are only 13 counts
[Tue Feb 14 03:02:28 2012] arf not found, will run specextract
[Tue Feb 14 03:03:02 2012] ../../acisf12249/products/spectra/fullrun_ccd3_acisf12249_pi14-548_pass1_cl_src3.warf not found
[Tue Feb 14 03:03:02 2012] ../../acisf12249/products/spectra/fullrun_ccd3_acisf12249_pi14-548_pass1_cl_src3.wrmf not found
[Tue Feb 14 03:03:02 2012] Removal of ../../acisf12249/products/spectra/fullrun_ccd3_acisf12249_pi14-548_pass1_cl_src3.soff failed
[Tue Feb 14 03:07:22 2012] Spectrum 3 has only 14 counts, deleting rmf
[Tue Feb 14 03:07:22 2012] 195.575
[Tue Feb 14 03:07:26 2012] Updating aperture counts using extracted products
[Tue Feb 14 03:07:26 2012] Error reading totcts from fullrun_ccd3_acisf12249_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Feb 14 03:07:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 03:07:26 2012] Using photon index=1.80, rate=0.000513, arf fullrun_ccd3_acisf12249_pi14-548_pass1_cl_src3.arf
[Tue Feb 14 03:07:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 14 03:07:26 2012] Updating source flux to 6.1e-15
[Tue Feb 14 03:07:32 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Tue Feb 14 03:07:32 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting