[Tue Nov  8 17:00:18 2011] Detection parameters:
  Position = (665.7, 67.2) = 15 56 17.29 66 18 20.9
  Extent = 0.5" x 0.5", rotation angle = 75 degrees
  Source counts = 11.2 +/- 3.5
  Background counts = 0.8
  Rate = 0.0002 +/- 7e-05

[Tue Nov  8 17:00:18 2011] Off-axis axis estimate = 1.58'
[Tue Nov  8 18:08:29 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Nov  8 18:08:29 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Nov  8 18:08:29 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.879
[Tue Nov  8 18:08:29 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.40"
[Tue Nov  8 18:30:15 2011] fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src20.ximg exists
[Tue Nov  8 18:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src20.csv
[Tue Nov  8 18:30:15 2011] fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src20_1.ximg exists
[Tue Nov  8 18:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src20.csv
[Tue Nov  8 18:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  8 18:30:15 2011] fullrun_ccd3_acisf12246_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Tue Nov  8 18:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12246_pi14-548_cl_pass0_tfrozen_src20.csv
[Tue Nov  8 18:30:15 2011] fullrun_ccd3_acisf12246_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Nov  8 18:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12246_pi14-548_cl_pass0_tfrozen_src20.csv
[Tue Nov  8 18:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12246_pi14-548_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12246_pi14-548_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  8 18:44:34 2011] Spatial fit model total counts = 10.564000, observed total counts = 14.000000
[Tue Nov  8 18:44:34 2011] Offset between fit and detection position for source 25 = 0.365403 pixels
[Tue Nov  8 18:44:34 2011] 11.851313 total counts/ 0.190913 bgd. counts: snr = 26.686751
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.365403 pixels
  Position = (666.0, 67.3) = 15 56 17.31 66 18 20.7
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 11.7 +/- 3.4
  Background counts = 0.2
  Rate = 0.0002 +/- 7e-05
[Tue Nov  8 18:44:34 2011] Vigneting correction estimate = 1.000000
[Tue Nov  8 18:44:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  8 18:44:34 2011] Assessing source extent using major axis lower bound
[Tue Nov  8 18:44:34 2011] Source does appear to be extended
[Tue Nov  8 18:44:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  8 18:44:34 2011] Deleting source due to low Poisson probability 0.9