[Tue Nov 8 17:00:18 2011] Detection parameters: Position = (1128.7, 807.3) = 15 55 39.30 66 24 24.6 Extent = 1.4" x 0.6", rotation angle = 6 degrees Source counts = 13.9 +/- 4.1 Background counts = 3.1 Rate = 0.0003 +/- 9e-05 [Tue Nov 8 17:00:18 2011] Off-axis axis estimate = 7.04' [Tue Nov 8 18:08:29 2011] Using EEF radius (= 2.20 ")to estimate initial spatial extent for simple fitting [Tue Nov 8 18:08:29 2011] Initial guess for spatial extent in simple fitting = 2.20" [Tue Nov 8 18:08:29 2011] source mask rpix=4.5, npix_max = 99, mask sum = 100, frac = 1.009 [Tue Nov 8 18:08:29 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 2.20" [Tue Nov 8 18:30:15 2011] fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src17.ximg exists [Tue Nov 8 18:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src17.csv [Tue Nov 8 18:30:15 2011] fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src17_1.ximg exists [Tue Nov 8 18:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src17.csv [Tue Nov 8 18:30:15 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf12246_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Nov 8 18:30:15 2011] fullrun_ccd3_acisf12246_pi14-548_cl_pass0_tfrozen_src17.ximg exists [Tue Nov 8 18:30:15 2011] fullrun_ccd3_acisf12246_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists [Tue Nov 8 18:30:15 2011] Fit fullrun_ccd3_acisf12246_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly [Tue Nov 8 18:44:34 2011] Spatial fit model total counts = 15.708700, observed total counts = 20.000000 [Tue Nov 8 18:44:34 2011] Offset between fit and detection position for source 17 = 0.488663 pixels Spatial fit parameters: Offset between fit and detection position for source 17 = 0.488663 pixels Position = (1128.5, 807.7) = 15 55 39.35 66 24 24.6 Extent = 1.5" x 1.1", rotation angle = 29 Source counts = 14.9 +/- 3.9 Background counts = 0.0 Rate = 0.0003 +/- 8e-05 [Tue Nov 8 18:44:34 2011] Vigneting correction estimate = 1.000000 [Tue Nov 8 18:44:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Nov 8 18:44:34 2011] Assessing source extent using major [Tue Nov 8 18:44:34 2011] Source does appear to be extended [Tue Nov 8 18:44:34 2011] Computing asymmetry using major and minor axis, asym = 1.34 [Tue Nov 8 18:44:34 2011] Deleting source due to low Poisson probability 1.0