[Fri Oct 21 16:07:44 2011] Detection parameters:
  Position = (333.7, 528.2) = 15 56 30.75 66 27 6.8
  Extent = 0.5" x 0.5", rotation angle = 34 degrees
  Source counts = 25.2 +/- 5.1
  Background counts = 0.8
  Rate = 0.0005 +/- 0.0001

[Fri Oct 21 16:07:44 2011] Off-axis axis estimate = 4.50'
[Fri Oct 21 17:23:23 2011] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 17:23:23 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Fri Oct 21 17:23:23 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Fri Oct 21 17:23:23 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.99"
[Fri Oct 21 17:40:54 2011] fullrun_ccd3_acisf12245_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct 21 17:40:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12245_pi14-548_cl_pass0_src7.csv
[Fri Oct 21 17:40:54 2011] fullrun_ccd3_acisf12245_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct 21 17:40:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12245_pi14-548_cl_pass0_src7.csv
[Fri Oct 21 17:40:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12245_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12245_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 17:40:54 2011] fullrun_ccd3_acisf12245_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct 21 17:40:54 2011] fullrun_ccd3_acisf12245_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct 21 17:40:54 2011] Fit fullrun_ccd3_acisf12245_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct 21 17:47:17 2011] Spatial fit model total counts = 28.043900, observed total counts = 30.000000
[Fri Oct 21 17:47:17 2011] Offset between fit and detection position for source 4 = 0.841363 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.841363 pixels
  Position = (334.5, 528.6) = 15 56 30.73 66 27 6.8
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 28.2 +/- 5.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Oct 21 17:47:17 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 17:47:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 17:47:17 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 17:47:17 2011] Source does appear to be extended
[Fri Oct 21 17:47:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 18:53:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:53:22 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Fri Oct 21 18:53:22 2011] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.774
[Fri Oct 21 18:53:22 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.72"
[Fri Oct 21 19:09:02 2011] fullrun_ccd3_acisf12245_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct 21 19:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12245_pi14-548_cl_pass1_src7.csv
[Fri Oct 21 19:09:02 2011] fullrun_ccd3_acisf12245_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct 21 19:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12245_pi14-548_cl_pass1_src7.csv
[Fri Oct 21 19:09:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12245_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12245_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 19:09:02 2011] fullrun_ccd3_acisf12245_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct 21 19:09:02 2011] fullrun_ccd3_acisf12245_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct 21 19:09:02 2011] Fit fullrun_ccd3_acisf12245_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Oct 21 19:17:48 2011] Spatial fit model total counts = 28.300100, observed total counts = 29.000000
[Fri Oct 21 19:17:48 2011] Offset between fit and detection position for source 4 = 0.183358 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.183358 pixels
  Position = (334.3, 528.7) = 15 56 30.74 66 27 6.8
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 28.3 +/- 5.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Oct 21 19:17:48 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 19:17:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 19:17:48 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 19:17:48 2011] Source does appear to be extended
[Fri Oct 21 19:17:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 19:34:06 2011] Writing source region out to fullrun_ccd3_acisf12245_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 21 19:34:06 2011] Extracting stamp from image fullrun_ccd3_acisf12245_pi14-548_cl_sm2.00.img.gz, (297, 492) - (371, 566)
[Fri Oct 21 19:34:06 2011] Writing fullrun_ccd3_acisf12245_pi14-548_pass1_cl_src4.gif
[Fri Oct 21 19:36:49 2011] Size of ../../acisf12245/products/events/fullrun_ccd3_acisf12245_pi14-548_pass1_cl_src4_src.evt.gz[events] = 29 counts
[Fri Oct 21 19:36:49 2011] Mean chipx,y = (254.62, 698.69)
[Fri Oct 21 19:36:49 2011] Mean tdetx,y = (4433.31, 3315.62)
[Fri Oct 21 19:36:49 2011] chipx,y range = (231.00-274.00, 681.00-715.00)
[Fri Oct 21 19:36:49 2011] Size of ../../acisf12245/products/events/fullrun_ccd3_acisf12245_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 16 counts
[Fri Oct 21 19:36:50 2011] Not generating rmf since there are only 28 counts
[Fri Oct 21 19:36:50 2011] arf not found, will run specextract
[Fri Oct 21 19:37:15 2011] ../../acisf12245/products/spectra/fullrun_ccd3_acisf12245_pi14-548_pass1_cl_src4.warf not found
[Fri Oct 21 19:37:15 2011] ../../acisf12245/products/spectra/fullrun_ccd3_acisf12245_pi14-548_pass1_cl_src4.wrmf not found
[Fri Oct 21 19:37:15 2011] Removal of ../../acisf12245/products/spectra/fullrun_ccd3_acisf12245_pi14-548_pass1_cl_src4.soff failed
[Fri Oct 21 19:44:15 2011] Spectrum 4 has only 28 counts, deleting rmf
[Fri Oct 21 19:44:15 2011] 177.349
[Fri Oct 21 19:44:59 2011] Updating aperture counts using extracted products
[Fri Oct 21 19:44:59 2011] Error reading totcts from fullrun_ccd3_acisf12245_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 21 19:44:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 19:44:59 2011] Using photon index=1.80, rate=0.000586, arf fullrun_ccd3_acisf12245_pi14-548_pass1_cl_src4.arf
[Fri Oct 21 19:44:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 19:44:59 2011] Updating source flux to 7.9e-15
[Fri Oct 21 19:45:22 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting