[Fri Oct 21 16:06:42 2011] Detection parameters:
  Position = (947.4, 583.3) = 15 54 18.41 66 25 5.3
  Extent = 4.3" x 3.3", rotation angle = 160 degrees
  Source counts = 72.7 +/- 10.1
  Background counts = 30.3
  Rate = 0.002 +/- 0.0002

[Fri Oct 21 16:06:42 2011] Off-axis axis estimate = 10.57'
[Fri Oct 21 16:50:03 2011] Using EEF radius (= 4.96 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:50:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 16:50:03 2011] Initial guess for spatial extent in simple fitting = 4.96"
[Fri Oct 21 16:50:03 2011] source mask rpix=10.1, npix_max = 448, mask sum = 441, frac = 0.984
[Fri Oct 21 16:50:03 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.96"
[Fri Oct 21 17:07:58 2011] fullrun_ccd1_acisf12245_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 17:07:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12245_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 17:07:58 2011] fullrun_ccd1_acisf12245_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 17:07:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12245_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 17:07:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12245_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12245_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 17:07:58 2011] fullrun_ccd1_acisf12245_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 17:07:58 2011] fullrun_ccd1_acisf12245_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 17:07:58 2011] Fit fullrun_ccd1_acisf12245_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 17:47:13 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 56.304109 pixels away
[Fri Oct 21 17:47:13 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 17:47:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 17:47:13 2011] Assessing source extent using major
[Fri Oct 21 17:47:13 2011] Source does appear to be extended
[Fri Oct 21 17:47:13 2011] Computing asymmetry using major and minor axis, asym = 1.29
[Fri Oct 21 18:21:53 2011] Using EEF radius (= 4.96 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 18:21:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 18:21:53 2011] Initial guess for spatial extent in simple fitting = 4.96"
[Fri Oct 21 18:21:53 2011] source mask rpix=10.1, npix_max = 448, mask sum = 441, frac = 0.984
[Fri Oct 21 18:21:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.96"
[Fri Oct 21 18:43:16 2011] fullrun_ccd1_acisf12245_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 18:43:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12245_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:43:16 2011] fullrun_ccd1_acisf12245_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 18:43:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12245_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:43:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12245_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12245_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:43:16 2011] fullrun_ccd1_acisf12245_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 18:43:16 2011] fullrun_ccd1_acisf12245_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 18:43:16 2011] Fit fullrun_ccd1_acisf12245_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 19:17:45 2011] Spatial fit model total counts = 144.000000, observed total counts = 144.000000
[Fri Oct 21 19:17:45 2011] Offset between fit and detection position for source 1 = 0.405175 pixels
[Fri Oct 21 19:17:45 2011] 143.654900 total counts/ 59.331400 bgd. counts: snr = 10.947283
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.405175 pixels
  Position = (947.7, 583.6) = 15 54 18.42 66 25 5.2
  Extent = 4.9 (3.9-5.9)", rotation angle = 0
  Source counts = 84.3 +/- 12.0
  Background counts = 59.3
  Rate = 0.002 +/- 0.0002
[Fri Oct 21 19:17:45 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 19:17:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 19:17:45 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 19:17:45 2011] Source does appear to be extended
[Fri Oct 21 19:17:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 19:23:35 2011] Writing source region out to fullrun_ccd1_acisf12245_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 19:23:35 2011] Extracting stamp from image fullrun_ccd1_acisf12245_pi14-548_cl_sm2.00.img.gz, (724, 359) - (1172, 808)
[Fri Oct 21 19:23:35 2011] Writing fullrun_ccd1_acisf12245_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 19:23:37 2011] Size of ../../acisf12245/products/events/fullrun_ccd1_acisf12245_pi14-548_pass1_cl_src1_src.evt.gz[events] = 133 counts
[Fri Oct 21 19:23:37 2011] Mean chipx,y = (827.38, 481.28)
[Fri Oct 21 19:23:37 2011] Mean tdetx,y = (4650.72, 4934.38)
[Fri Oct 21 19:23:37 2011] chipx,y range = (778.00-868.00, 440.00-530.00)
[Fri Oct 21 19:23:37 2011] Size of ../../acisf12245/products/events/fullrun_ccd1_acisf12245_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 661 counts
[Fri Oct 21 19:23:38 2011] Not generating rmf since there are only 84 counts
[Fri Oct 21 19:23:38 2011] arf not found, will run specextract
[Fri Oct 21 19:24:01 2011] ../../acisf12245/products/spectra/fullrun_ccd1_acisf12245_pi14-548_pass1_cl_src1.warf not found
[Fri Oct 21 19:24:01 2011] ../../acisf12245/products/spectra/fullrun_ccd1_acisf12245_pi14-548_pass1_cl_src1.wrmf not found
[Fri Oct 21 19:24:01 2011] Removal of ../../acisf12245/products/spectra/fullrun_ccd1_acisf12245_pi14-548_pass1_cl_src1.soff failed
[Fri Oct 21 19:27:31 2011] Spectrum 1 has only 84 counts, deleting rmf
[Fri Oct 21 19:27:31 2011] 161.139
[Fri Oct 21 19:44:59 2011] Updating aperture counts using extracted products
[Fri Oct 21 19:44:59 2011] Error reading totcts from fullrun_ccd1_acisf12245_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 19:44:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 19:44:59 2011] Using photon index=1.80, rate=0.00174, arf fullrun_ccd1_acisf12245_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 19:44:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 19:44:59 2011] Updating source flux to 2.5e-14
[Fri Oct 21 19:45:08 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 19:45:09 2011] acisf12245/analysis//spectral/fullrun_ccd1_acisf12245_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete