[Fri Oct 21 16:06:12 2011] Detection parameters:
  Position = (810.2, 752.5) = 15 54 53.41 66 18 26.1
  Extent = 2.9" x 2.7", rotation angle = 134 degrees
  Source counts = 655.8 +/- 26.9
  Background counts = 67.2
  Rate = 0.01 +/- 0.0006

[Fri Oct 21 16:06:12 2011] Off-axis axis estimate = 8.66'
[Fri Oct 21 16:10:42 2011] Using EEF radius (= 3.32 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:10:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 16:10:42 2011] Initial guess for spatial extent in simple fitting = 3.32"
[Fri Oct 21 16:10:42 2011] source mask rpix=6.7, npix_max = 209, mask sum = 210, frac = 1.001
[Fri Oct 21 16:10:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.32"
[Fri Oct 21 16:50:02 2011] fullrun_ccd0_acisf12245_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 16:50:02 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12245_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 16:50:02 2011] fullrun_ccd0_acisf12245_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 16:50:02 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12245_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 16:50:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12245_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12245_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:50:03 2011] fullrun_ccd0_acisf12245_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 16:50:03 2011] fullrun_ccd0_acisf12245_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 16:50:03 2011] Fit fullrun_ccd0_acisf12245_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 17:47:12 2011] Spatial fit model total counts = 726.999000, observed total counts = 727.000000
[Fri Oct 21 17:47:12 2011] Offset between fit and detection position for source 1 = 0.499988 pixels
[Fri Oct 21 17:47:12 2011] 727.227600 total counts/ 59.497600 bgd. counts: snr = 86.566760
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.499988 pixels
  Position = (810.7, 752.6) = 15 54 53.41 66 18 25.9
  Extent = 3.3 (3.1-3.5)", rotation angle = 0
  Source counts = 667.7 +/- 27.0
  Background counts = 59.5
  Rate = 0.01 +/- 0.0006
[Fri Oct 21 17:47:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 17:47:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 17:47:12 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 17:47:12 2011] Source does appear to be extended
[Fri Oct 21 17:47:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 17:47:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 17:47:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 17:47:33 2011] Initial guess for spatial extent in simple fitting = 3.32"
[Fri Oct 21 17:47:33 2011] source mask rpix=6.8, npix_max = 210, mask sum = 225, frac = 1.068
[Fri Oct 21 17:47:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.32"
[Fri Oct 21 18:21:52 2011] fullrun_ccd0_acisf12245_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 18:21:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12245_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:21:52 2011] fullrun_ccd0_acisf12245_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 18:21:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12245_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 18:21:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12245_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12245_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 18:21:52 2011] fullrun_ccd0_acisf12245_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 18:21:52 2011] fullrun_ccd0_acisf12245_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 18:21:52 2011] Fit fullrun_ccd0_acisf12245_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 19:17:44 2011] Spatial fit model total counts = 727.000000, observed total counts = 727.000000
[Fri Oct 21 19:17:44 2011] Offset between fit and detection position for source 1 = 0.001051 pixels
[Fri Oct 21 19:17:44 2011] 727.225300 total counts/ 59.342300 bgd. counts: snr = 86.699821
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001051 pixels
  Position = (810.7, 752.6) = 15 54 53.41 66 18 25.9
  Extent = 3.3 (3.1-3.5)", rotation angle = 0
  Source counts = 667.9 +/- 27.0
  Background counts = 59.3
  Rate = 0.01 +/- 0.0006
[Fri Oct 21 19:17:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 19:17:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 19:17:44 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 19:17:44 2011] Source does appear to be extended
[Fri Oct 21 19:17:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 19:18:04 2011] Writing source region out to fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 19:18:04 2011] Extracting stamp from image fullrun_ccd0_acisf12245_pi14-548_cl_sm2.00.img.gz, (659, 600) - (963, 905)
[Fri Oct 21 19:18:04 2011] Writing fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 19:18:06 2011] Size of ../../acisf12245/products/events/fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1_src.evt.gz[events] = 716 counts
[Fri Oct 21 19:18:06 2011] Mean chipx,y = (376.24, 687.03)
[Fri Oct 21 19:18:06 2011] Mean tdetx,y = (3748.03, 4755.76)
[Fri Oct 21 19:18:06 2011] chipx,y range = (335.00-414.00, 652.00-727.00)
[Fri Oct 21 19:18:06 2011] Size of ../../acisf12245/products/events/fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 236 counts
[Fri Oct 21 19:18:09 2011] rmf not found, will run specextract
[Fri Oct 21 19:18:09 2011] arf not found, will run specextract
[Fri Oct 21 19:18:42 2011] ../../acisf12245/products/spectra/fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1.warf not found
[Fri Oct 21 19:18:42 2011] ../../acisf12245/products/spectra/fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1.wrmf not found
[Fri Oct 21 19:18:42 2011] Removal of ../../acisf12245/products/spectra/fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1.soff failed
[Fri Oct 21 19:23:35 2011] Keeping rmf generated by specextract
[Fri Oct 21 19:23:35 2011] 169.365
[Fri Oct 21 19:44:59 2011] Updating aperture counts using extracted products
[Fri Oct 21 19:44:59 2011] Error reading totcts from fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 19:44:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 19:44:59 2011] Using photon index=1.80, rate=0.0138, arf fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 19:44:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 19:44:59 2011] Updating source flux to 1.9e-13
[Fri Oct 21 19:45:08 2011] Reading fit data from acisf12245/analysis//spectral/fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 21 19:45:08 2011] Spectral fit parameter nH value = 9.93736e+19
[Fri Oct 21 19:45:08 2011] Spectral fit parameter PhoIndex value = 2.06564
[Fri Oct 21 19:45:08 2011] Failed to get F(0.3-8.0) from acisf12245/analysis//spectral/fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 19:45:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 19:45:08 2011] Using Nh = 9.9e+19, photon index=2.07, rate=0.0138, arf fullrun_ccd0_acisf12245_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 19:45:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 19:45:08 2011] Updating source flux to 1.9e-13