[Wed Jul 11 22:51:38 2012] Detection parameters:
  Position = (278.5, 709.0) = 5 53 7.17 -33 42 53.0
  Extent = 0.5" x 0.5", rotation angle = 116 degrees
  Source counts = 26.9 +/- 5.3
  Background counts = 1.1
  Rate = 0.0004 +/- 7e-05

[Wed Jul 11 22:51:38 2012] Off-axis axis estimate = 2.29'
[Thu Jul 12 00:02:02 2012] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 00:02:02 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Thu Jul 12 00:02:02 2012] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.722
[Thu Jul 12 00:02:02 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 0.46"
[Thu Jul 12 00:20:48 2012] fullrun_ccd2_acisf12244_pi14-548_cl_pass0_src9.ximg exists
[Thu Jul 12 00:20:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12244_pi14-548_cl_pass0_src9.csv
[Thu Jul 12 00:20:48 2012] fullrun_ccd2_acisf12244_pi14-548_cl_pass0_src9_1.ximg exists
[Thu Jul 12 00:20:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12244_pi14-548_cl_pass0_src9.csv
[Thu Jul 12 00:20:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12244_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12244_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 00:20:48 2012] fullrun_ccd2_acisf12244_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Thu Jul 12 00:20:48 2012] fullrun_ccd2_acisf12244_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jul 12 00:20:48 2012] Fit fullrun_ccd2_acisf12244_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jul 12 00:53:30 2012] Spatial fit model total counts = 29.105300, observed total counts = 29.000000
[Thu Jul 12 00:53:30 2012] Offset between fit and detection position for source 3 = 0.727327 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.727327 pixels
  Position = (279.0, 709.6) = 5 53 7.17 -33 42 53.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 28.8 +/- 5.4
  Background counts = 0.0
  Rate = 0.0004 +/- 7e-05
[Thu Jul 12 00:53:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 00:53:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 00:53:30 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 00:53:30 2012] Source does appear to be extended
[Thu Jul 12 00:53:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 01:58:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 01:58:05 2012] Initial guess for spatial extent in simple fitting = 0.48"
[Thu Jul 12 01:58:05 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.047
[Thu Jul 12 01:58:05 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 0.48"
[Thu Jul 12 02:15:44 2012] fullrun_ccd2_acisf12244_pi14-548_cl_pass1_src9.ximg exists
[Thu Jul 12 02:15:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12244_pi14-548_cl_pass1_src9.csv
[Thu Jul 12 02:15:44 2012] fullrun_ccd2_acisf12244_pi14-548_cl_pass1_src9_1.ximg exists
[Thu Jul 12 02:15:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12244_pi14-548_cl_pass1_src9.csv
[Thu Jul 12 02:15:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12244_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12244_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 02:15:44 2012] fullrun_ccd2_acisf12244_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Thu Jul 12 02:15:44 2012] fullrun_ccd2_acisf12244_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jul 12 02:15:44 2012] Fit fullrun_ccd2_acisf12244_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jul 12 02:46:27 2012] Spatial fit model total counts = 28.720100, observed total counts = 29.000000
[Thu Jul 12 02:46:27 2012] Offset between fit and detection position for source 3 = 0.018386 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.018386 pixels
  Position = (279.0, 709.5) = 5 53 7.17 -33 42 53.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 28.4 +/- 5.3
  Background counts = 0.0
  Rate = 0.0004 +/- 7e-05
[Thu Jul 12 02:46:27 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 02:46:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 02:46:27 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 02:46:27 2012] Source does appear to be extended
[Thu Jul 12 02:46:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 03:06:21 2012] Writing source region out to fullrun_ccd2_acisf12244_pi14-548_pass1_cl_src3_src.reg
[Thu Jul 12 03:06:21 2012] Extracting stamp from image fullrun_ccd2_acisf12244_pi14-548_cl_sm2.00.img.gz, (258, 688) - (300, 731)
[Thu Jul 12 03:06:21 2012] Writing fullrun_ccd2_acisf12244_pi14-548_pass1_cl_src3.gif
[Thu Jul 12 03:10:42 2012] Size of ../../acisf12244/products/events/fullrun_ccd2_acisf12244_pi14-548_pass1_cl_src3_src.evt.gz[events] = 28 counts
[Thu Jul 12 03:10:42 2012] Mean chipx,y = (340.00, 775.00)
[Thu Jul 12 03:10:42 2012] Mean tdetx,y = (3836.00, 3746.00)
[Thu Jul 12 03:10:42 2012] chipx,y range = (321.00-356.00, 757.00-793.00)
[Thu Jul 12 03:10:42 2012] Size of ../../acisf12244/products/events/fullrun_ccd2_acisf12244_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 9 counts
[Thu Jul 12 03:10:43 2012] Not generating rmf since there are only 28 counts
[Thu Jul 12 03:10:43 2012] arf not found, will run specextract
[Thu Jul 12 03:11:19 2012] ../../acisf12244/products/spectra/fullrun_ccd2_acisf12244_pi14-548_pass1_cl_src3.warf not found
[Thu Jul 12 03:11:19 2012] ../../acisf12244/products/spectra/fullrun_ccd2_acisf12244_pi14-548_pass1_cl_src3.wrmf not found
[Thu Jul 12 03:11:19 2012] Removal of ../../acisf12244/products/spectra/fullrun_ccd2_acisf12244_pi14-548_pass1_cl_src3.soff failed
[Thu Jul 12 03:16:57 2012] Spectrum 3 has only 28 counts, deleting rmf
[Thu Jul 12 03:16:57 2012] 195.525
[Thu Jul 12 03:25:10 2012] Updating aperture counts using extracted products
[Thu Jul 12 03:25:10 2012] Error reading totcts from fullrun_ccd2_acisf12244_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Jul 12 03:25:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 03:25:10 2012] Using photon index=1.80, rate=0.000383, arf fullrun_ccd2_acisf12244_pi14-548_pass1_cl_src3.arf
[Thu Jul 12 03:25:10 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jul 12 03:25:10 2012] Updating source flux to 4.5e-15
[Thu Jul 12 03:25:22 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting