[Tue Mar 13 12:18:48 2012] Detection parameters:
  Position = (720.8, 220.3) = 1 39 46.91 -6 0 5.5
  Extent = 1.8" x 1.2", rotation angle = 44 degrees
  Source counts = 235.2 +/- 15.6
  Background counts = 8.8
  Rate = 0.01 +/- 0.0008

[Tue Mar 13 12:18:49 2012] Off-axis axis estimate = 7.65'
[Tue Mar 13 12:19:22 2012] Using EEF radius (= 2.59 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:19:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 12:19:22 2012] Initial guess for spatial extent in simple fitting = 2.59"
[Tue Mar 13 12:19:22 2012] source mask rpix=5.3, npix_max = 132, mask sum = 132, frac = 0.993
[Tue Mar 13 12:19:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.59"
[Tue Mar 13 12:19:23 2012] fullrun_ccd3_acisf12243_pi14-548_cl_pass0_src1.ximg exists
[Tue Mar 13 12:19:23 2012] fullrun_ccd3_acisf12243_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Mar 13 12:19:23 2012] Fit fullrun_ccd3_acisf12243_pi14-548_cl_pass0_src1 appears to have run properly
[Tue Mar 13 12:19:23 2012] fullrun_ccd3_acisf12243_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 12:19:23 2012] fullrun_ccd3_acisf12243_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 12:19:23 2012] Fit fullrun_ccd3_acisf12243_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 12:19:29 2012] Spatial fit model total counts = 267.996000, observed total counts = 268.000000
[Tue Mar 13 12:19:29 2012] Offset between fit and detection position for source 2 = 0.803238 pixels
[Tue Mar 13 12:19:29 2012] 268.186100 total counts/ 28.243100 bgd. counts: snr = 45.149392
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.803238 pixels
  Position = (721.5, 220.7) = 1 39 46.90 -6 0 5.5
  Extent = 1.9 (1.7-2.1)", rotation angle = 0
  Source counts = 239.9 +/- 16.4
  Background counts = 28.2
  Rate = 0.01 +/- 0.0008
[Tue Mar 13 12:19:29 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:19:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:19:29 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 12:19:29 2012] Source does appear to be extended
[Tue Mar 13 12:19:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:19:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:19:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 12:19:44 2012] Initial guess for spatial extent in simple fitting = 1.90"
[Tue Mar 13 12:19:44 2012] source mask rpix=3.9, npix_max = 75, mask sum = 81, frac = 1.069
[Tue Mar 13 12:19:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.90"
[Tue Mar 13 12:19:44 2012] fullrun_ccd3_acisf12243_pi14-548_cl_pass1_src1.ximg exists
[Tue Mar 13 12:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12243_pi14-548_cl_pass1_src1.csv
[Tue Mar 13 12:19:44 2012] fullrun_ccd3_acisf12243_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Mar 13 12:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12243_pi14-548_cl_pass1_src1.csv
[Tue Mar 13 12:19:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12243_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12243_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:19:44 2012] fullrun_ccd3_acisf12243_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 12:19:44 2012] fullrun_ccd3_acisf12243_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 12:19:44 2012] Fit fullrun_ccd3_acisf12243_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 12:19:50 2012] Spatial fit model total counts = 259.998000, observed total counts = 260.000000
[Tue Mar 13 12:19:50 2012] Offset between fit and detection position for source 2 = 0.095849 pixels
[Tue Mar 13 12:19:50 2012] 260.120800 total counts/ 30.589800 bgd. counts: snr = 41.500471
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.095849 pixels
  Position = (721.6, 220.8) = 1 39 46.90 -6 0 5.5
  Extent = 1.8 (1.6-2.0)", rotation angle = 0
  Source counts = 229.5 +/- 16.1
  Background counts = 30.6
  Rate = 0.01 +/- 0.0008
[Tue Mar 13 12:19:50 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:19:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:19:50 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 12:19:50 2012] Source does appear to be extended
[Tue Mar 13 12:19:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:21:41 2012] Not overwriting source region fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_src.reg
[Tue Mar 13 12:21:41 2012] Extracting stamp from image fullrun_ccd3_acisf12243_pi14-548_cl_sm2.00.img.gz, (639, 138) - (804, 303)
[Tue Mar 13 12:21:41 2012] Writing fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2.gif
[Tue Mar 13 12:21:41 2012] ../../acisf12243/products/events/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_src.evt and ../../acisf12243/products/events/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Mar 13 12:21:41 2012] Size of ../../acisf12243/products/events/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_src.evt.gz[events] = 254 counts
[Tue Mar 13 12:21:41 2012] Mean chipx,y = (362.13, 189.23)
[Tue Mar 13 12:21:41 2012] Mean tdetx,y = (4942.77, 3423.13)
[Tue Mar 13 12:21:41 2012] chipx,y range = (338.00-388.00, 162.00-212.00)
[Tue Mar 13 12:21:42 2012] Size of ../../acisf12243/products/events/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 52 counts
[Tue Mar 13 12:21:42 2012] ../../acisf12243/products/images/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_src.img and ../../acisf12243/products/images/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Mar 13 12:21:42 2012] ../../acisf12243/products/spectra/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_src.pi and ../../acisf12243/products/spectra/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Mar 13 12:21:44 2012] ../../acisf12243/products/lightcurves/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_src.lc and ../../acisf12243/products/lightcurves/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Mar 13 12:22:10 2012] Keeping rmf generated by specextract
[Tue Mar 13 12:22:10 2012] 171.944
[Tue Mar 13 12:22:20 2012] Updating aperture counts using extracted products
[Tue Mar 13 12:22:20 2012] Error reading totcts from fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Mar 13 12:22:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 12:22:20 2012] Using photon index=1.80, rate=0.0119, arf fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2.arf
[Tue Mar 13 12:22:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 12:22:20 2012] Updating source flux to 1.7e-13
[Tue Mar 13 12:22:29 2012] Reading fit data from acisf12243/analysis//spectral/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_pl.csv
[Tue Mar 13 12:22:29 2012] Spectral fit parameter nH value = 9.38857e+20
[Tue Mar 13 12:22:29 2012] Spectral fit parameter PhoIndex value = 4.30903
[Tue Mar 13 12:22:29 2012] Failed to get F(0.3-8.0) from acisf12243/analysis//spectral/fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 12:22:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 12:22:29 2012] Using Nh = 9.4e+20, photon index=4.31, rate=0.0119, arf fullrun_ccd3_acisf12243_pi14-548_pass1_cl_src2.arf
[Tue Mar 13 12:22:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 12:22:29 2012] Updating source flux to 2.6e-13