[Sun Oct 30 00:25:07 2011] Detection parameters:
  Position = (1053.6, 844.5) = 13 14 33.74 44 14 15.6
  Extent = 5.9" x 3.3", rotation angle = 104 degrees
  Source counts = 17.8 +/- 6.5
  Background counts = 24.2
  Rate = 0.0006 +/- 0.0002

[Sun Oct 30 00:25:07 2011] Off-axis axis estimate = 12.57'
[Sun Oct 30 00:28:54 2011] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 00:28:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 00:28:54 2011] Initial guess for spatial extent in simple fitting = 7.07"
[Sun Oct 30 00:28:54 2011] source mask rpix=14.4, npix_max = 885, mask sum = 841, frac = 0.950
[Sun Oct 30 00:28:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.07"
[Sun Oct 30 00:45:17 2011] fullrun_ccd2_acisf12242_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 00:45:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12242_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 00:45:17 2011] fullrun_ccd2_acisf12242_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 00:45:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12242_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 00:45:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12242_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12242_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 00:45:17 2011] fullrun_ccd2_acisf12242_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 00:45:17 2011] fullrun_ccd2_acisf12242_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 00:45:17 2011] Fit fullrun_ccd2_acisf12242_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 01:14:52 2011] Spatial fit model total counts = 137.999000, observed total counts = 138.000000
[Sun Oct 30 01:14:52 2011] Offset between fit and detection position for source 1 = 3.008302 pixels
[Sun Oct 30 01:14:52 2011] 137.962500 total counts/ 117.670000 bgd. counts: snr = 1.870694
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.008302 pixels
  Position = (1052.3, 847.3) = 13 14 33.82 44 14 16.7
  Extent = 4.5 (3.1-7.3)", rotation angle = 0
  Source counts = 20.3 +/- 11.7
  Background counts = 117.7
  Rate = 0.0007 +/- 0.0004
[Sun Oct 30 01:14:52 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 01:14:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 01:14:52 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 01:14:52 2011] Source does appear to be extended
[Sun Oct 30 01:14:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 01:15:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 01:15:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 01:15:06 2011] Initial guess for spatial extent in simple fitting = 4.52"
[Sun Oct 30 01:15:06 2011] source mask rpix=9.2, npix_max = 375, mask sum = 361, frac = 0.961
[Sun Oct 30 01:15:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.52"
[Sun Oct 30 01:25:47 2011] fullrun_ccd2_acisf12242_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 01:25:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12242_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 01:25:47 2011] fullrun_ccd2_acisf12242_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 01:25:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12242_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 01:25:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12242_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12242_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 01:25:47 2011] fullrun_ccd2_acisf12242_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 01:25:47 2011] fullrun_ccd2_acisf12242_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 01:25:47 2011] Fit fullrun_ccd2_acisf12242_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 01:57:19 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Sun Oct 30 01:57:19 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 01:57:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 01:57:19 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 01:57:19 2011] Source does appear to be extended
[Sun Oct 30 01:57:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 01:57:33 2011] Writing source region out to fullrun_ccd2_acisf12242_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 30 01:57:33 2011] Extracting stamp from image fullrun_ccd2_acisf12242_pi14-548_cl_sm2.00.img.gz, (846, 640) - (1259, 1054)
[Sun Oct 30 01:57:33 2011] Writing fullrun_ccd2_acisf12242_pi14-548_pass1_cl_src1.gif
[Sun Oct 30 01:57:35 2011] Size of ../../acisf12242/products/events/fullrun_ccd2_acisf12242_pi14-548_pass1_cl_src1_src.evt.gz[events] = 53 counts
[Sun Oct 30 01:57:35 2011] Mean chipx,y = (370.94, 828.25)
[Sun Oct 30 01:57:35 2011] Mean tdetx,y = (3889.25, 3715.06)
[Sun Oct 30 01:57:35 2011] chipx,y range = (336.00-413.00, 784.00-865.00)
[Sun Oct 30 01:57:35 2011] Size of ../../acisf12242/products/events/fullrun_ccd2_acisf12242_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 490 counts
[Sun Oct 30 01:57:36 2011] Not generating rmf since there are only 20 counts
[Sun Oct 30 01:57:36 2011] arf not found, will run specextract
[Sun Oct 30 01:58:05 2011] ../../acisf12242/products/spectra/fullrun_ccd2_acisf12242_pi14-548_pass1_cl_src1.warf not found
[Sun Oct 30 01:58:05 2011] ../../acisf12242/products/spectra/fullrun_ccd2_acisf12242_pi14-548_pass1_cl_src1.wrmf not found
[Sun Oct 30 01:58:05 2011] Removal of ../../acisf12242/products/spectra/fullrun_ccd2_acisf12242_pi14-548_pass1_cl_src1.soff failed
[Sun Oct 30 01:59:20 2011] Spectrum 1 has only 20 counts, deleting rmf
[Sun Oct 30 01:59:20 2011] 152.854
[Sun Oct 30 02:10:44 2011] Updating aperture counts using extracted products
[Sun Oct 30 02:10:44 2011] Error reading totcts from fullrun_ccd2_acisf12242_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 30 02:10:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 02:10:44 2011] Using photon index=1.80, rate=0.000684, arf fullrun_ccd2_acisf12242_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 02:10:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 02:10:44 2011] Updating source flux to 9.7e-15
[Sun Oct 30 02:10:46 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 02:10:47 2011] acisf12242/analysis//spectral/fullrun_ccd2_acisf12242_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete