[Fri Nov  4 07:49:41 2011] Detection parameters:
  Position = (526.8, 1212.8) = 21 7 28.34 -25 19 18.0
  Extent = 2.1" x 1.7", rotation angle = 50 degrees
  Source counts = 44.8 +/- 8.8
  Background counts = 33.2
  Rate = 0.0006 +/- 0.0001

[Fri Nov  4 07:49:42 2011] Off-axis axis estimate = 9.93'
[Fri Nov  4 09:10:34 2011] Using EEF radius (= 4.37 ")to estimate initial spatial extent for simple fitting
[Fri Nov  4 09:10:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov  4 09:10:34 2011] Initial guess for spatial extent in simple fitting = 4.37"
[Fri Nov  4 09:10:34 2011] source mask rpix=8.9, npix_max = 351, mask sum = 361, frac = 1.026
[Fri Nov  4 09:10:34 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 4.37"
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src15.ximg exists
[Fri Nov  4 09:39:58 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src15.csv
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Nov  4 09:39:58 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src15.csv
[Fri Nov  4 09:39:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Nov  4 09:39:58 2011] Fit fullrun_ccd3_acisf12241_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Nov  4 09:40:11 2011] Spatial fit model total counts = 121.254000, observed total counts = 121.000000
[Fri Nov  4 09:40:11 2011] Offset between fit and detection position for source 28 = 5.308666 pixels
[Fri Nov  4 09:40:11 2011] 120.236100 total counts/ 89.831100 bgd. counts: snr = 3.207980
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 5.308666 pixels
  Position = (531.4, 1215.4) = 21 7 28.19 -25 19 16.9
  Extent = 2.5 (1.7-4.8)", rotation angle = 0
  Source counts = 30.4 +/- 11.0
  Background counts = 89.8
  Rate = 0.0004 +/- 0.0002
[Fri Nov  4 09:40:11 2011] Vigneting correction estimate = 1.000000
[Fri Nov  4 09:40:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov  4 09:40:11 2011] Assessing source extent using major axis lower bound
[Fri Nov  4 09:40:11 2011] Source does appear to be extended
[Fri Nov  4 09:40:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov  4 10:53:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov  4 10:53:57 2011] Initial guess for spatial extent in simple fitting = 2.50"
[Fri Nov  4 10:53:57 2011] source mask rpix=5.1, npix_max = 124, mask sum = 121, frac = 0.971
[Fri Nov  4 10:53:57 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 2.50"
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src15.ximg exists
[Fri Nov  4 11:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src15.csv
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src15_1.ximg exists
[Fri Nov  4 11:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src15.csv
[Fri Nov  4 11:19:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Nov  4 11:19:32 2011] Fit fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Nov  4 11:19:45 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 20.829306 pixels away
[Fri Nov  4 11:19:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov  4 11:19:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov  4 11:19:45 2011] Assessing source extent using major axis lower bound
[Fri Nov  4 11:19:45 2011] Source does appear to be extended
[Fri Nov  4 11:19:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov  4 11:52:54 2011] Writing source region out to fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src28_src.reg
[Fri Nov  4 11:52:54 2011] Extracting stamp from image fullrun_ccd3_acisf12241_pi14-548_cl_sm2.00.img.gz, (417, 1101) - (646, 1330)
[Fri Nov  4 11:52:54 2011] Writing fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src28.gif
[Fri Nov  4 12:02:46 2011] Size of ../../acisf12241/products/events/fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src28_src.evt.gz[events] = 76 counts
[Fri Nov  4 12:02:46 2011] Mean chipx,y = (117.57, 146.46)
[Fri Nov  4 12:02:46 2011] Mean tdetx,y = (4985.54, 3178.57)
[Fri Nov  4 12:02:46 2011] chipx,y range = (94.00-150.00, 114.00-177.00)
[Fri Nov  4 12:02:46 2011] Size of ../../acisf12241/products/events/fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 339 counts
[Fri Nov  4 12:02:52 2011] Not generating rmf since there are only 30 counts
[Fri Nov  4 12:02:52 2011] arf not found, will run specextract
[Fri Nov  4 12:03:15 2011] ../../acisf12241/products/spectra/fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src28.warf not found
[Fri Nov  4 12:03:15 2011] ../../acisf12241/products/spectra/fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src28.wrmf not found
[Fri Nov  4 12:03:15 2011] Removal of ../../acisf12241/products/spectra/fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src28.soff failed
[Fri Nov  4 12:09:13 2011] Spectrum 28 has only 30 counts, deleting rmf
[Fri Nov  4 12:09:13 2011] 157.325
[Fri Nov  4 12:10:04 2011] Updating aperture counts using extracted products
[Fri Nov  4 12:10:04 2011] Error reading totcts from fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src28_src.pi.gz
[Fri Nov  4 12:10:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov  4 12:10:04 2011] Using photon index=1.80, rate=0.000418, arf fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src28.arf
[Fri Nov  4 12:10:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Nov  4 12:10:04 2011] Updating source flux to 6.3e-15
[Fri Nov  4 12:10:20 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting