[Fri Nov  4 07:49:41 2011] Detection parameters:
  Position = (704.1, 658.3) = 21 7 21.91 -25 23 50.8
  Extent = 1.0" x 0.6", rotation angle = 4 degrees
  Source counts = 13.3 +/- 4.0
  Background counts = 2.7
  Rate = 0.0002 +/- 5e-05

[Fri Nov  4 07:49:42 2011] Off-axis axis estimate = 5.17'
[Fri Nov  4 09:10:34 2011] Using EEF radius (= 1.25 ")to estimate initial spatial extent for simple fitting
[Fri Nov  4 09:10:34 2011] Initial guess for spatial extent in simple fitting = 1.25"
[Fri Nov  4 09:10:34 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Fri Nov  4 09:10:34 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 1.25"
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src25.ximg exists
[Fri Nov  4 09:39:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src25.csv
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src25_1.ximg exists
[Fri Nov  4 09:39:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src25.csv
[Fri Nov  4 09:39:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Nov  4 09:39:58 2011] Fit fullrun_ccd3_acisf12241_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Nov  4 09:40:11 2011] Spatial fit model total counts = 22.379000, observed total counts = 22.000000
[Fri Nov  4 09:40:11 2011] Offset between fit and detection position for source 16 = 0.748693 pixels
[Fri Nov  4 09:40:11 2011] 22.516200 total counts/ 10.729900 bgd. counts: snr = 3.598153
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.748693 pixels
  Position = (703.6, 658.9) = 21 7 21.95 -25 23 50.8
  Extent = 0.8 (0.5-1.8)", rotation angle = 0
  Source counts = 11.8 +/- 4.7
  Background counts = 10.7
  Rate = 0.0002 +/- 7e-05
[Fri Nov  4 09:40:11 2011] Vigneting correction estimate = 1.000000
[Fri Nov  4 09:40:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov  4 09:40:11 2011] Assessing source extent using major axis lower bound
[Fri Nov  4 09:40:11 2011] Source does appear to be extended
[Fri Nov  4 09:40:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov  4 10:53:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov  4 10:53:57 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Fri Nov  4 10:53:57 2011] source mask rpix=1.6, npix_max = 16, mask sum = 20, frac = 1.185
[Fri Nov  4 10:53:57 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.76"
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src25.ximg exists
[Fri Nov  4 11:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src25.csv
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src25_1.ximg exists
[Fri Nov  4 11:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src25.csv
[Fri Nov  4 11:19:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Nov  4 11:19:32 2011] Fit fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Nov  4 11:19:45 2011] Spatial fit model total counts = 20.593100, observed total counts = 21.000000
[Fri Nov  4 11:19:45 2011] Offset between fit and detection position for source 16 = 1.296559 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.296559 pixels
  Position = (704.7, 659.4) = 21 7 21.91 -25 23 50.5
  Extent = 1.3 (0.8-1.5)", rotation angle = 0
  Source counts = 19.6 +/- 4.4
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
 Deleting source due to low signal-to-noise ratio