[Fri Nov  4 07:49:41 2011] Detection parameters:
  Position = (963.7, 767.6) = 21 7 12.49 -25 22 57.0
  Extent = 0.9" x 0.6", rotation angle = 28 degrees
  Source counts = 72.6 +/- 9.2
  Background counts = 11.4
  Rate = 0.001 +/- 0.0001

[Fri Nov  4 07:49:42 2011] Off-axis axis estimate = 6.04'
[Fri Nov  4 09:10:34 2011] Using EEF radius (= 1.65 ")to estimate initial spatial extent for simple fitting
[Fri Nov  4 09:10:34 2011] Initial guess for spatial extent in simple fitting = 1.65"
[Fri Nov  4 09:10:34 2011] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.943
[Fri Nov  4 09:10:34 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.65"
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src11.ximg exists
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Nov  4 09:39:58 2011] Fit fullrun_ccd3_acisf12241_pi14-548_cl_pass0_src11 appears to have run properly
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Nov  4 09:39:58 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Nov  4 09:39:58 2011] Fit fullrun_ccd3_acisf12241_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Nov  4 09:40:11 2011] Spatial fit model total counts = 75.275000, observed total counts = 78.000000
[Fri Nov  4 09:40:11 2011] Offset between fit and detection position for source 13 = 0.964705 pixels
[Fri Nov  4 09:40:11 2011] 76.740700 total counts/ 14.030800 bgd. counts: snr = 16.741520
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.964705 pixels
  Position = (964.6, 768.0) = 21 7 12.47 -25 22 57.1
  Extent = 1.5" x 0.9", rotation angle = 323
  Source counts = 62.7 +/- 8.8
  Background counts = 14.0
  Rate = 0.0009 +/- 0.0001
[Fri Nov  4 09:40:11 2011] Vigneting correction estimate = 1.000000
[Fri Nov  4 09:40:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov  4 09:40:11 2011] Assessing source extent using major
[Fri Nov  4 09:40:11 2011] Source does appear to be extended
[Fri Nov  4 09:40:11 2011] Computing asymmetry using major and minor axis, asym = 1.78
[Fri Nov  4 09:40:11 2011] Source is asymmetric
[Fri Nov  4 10:53:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov  4 10:53:57 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Fri Nov  4 10:53:57 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Fri Nov  4 10:53:57 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.20"
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src11.ximg exists
[Fri Nov  4 11:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src11.csv
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Nov  4 11:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src11.csv
[Fri Nov  4 11:19:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12241_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Nov  4 11:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src11.csv
[Fri Nov  4 11:19:32 2011] fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Nov  4 11:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src11.csv
[Fri Nov  4 11:19:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12241_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov  4 11:19:45 2011] Spatial fit model total counts = 48.446000, observed total counts = 75.000000
[Fri Nov  4 11:19:45 2011] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Nov  4 11:19:45 2011] Vigneting correction estimate = 1.000000
[Fri Nov  4 11:19:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov  4 11:19:45 2011] Assessing source extent using major
[Fri Nov  4 11:19:45 2011] Source does appear to be extended
[Fri Nov  4 11:19:45 2011] Computing asymmetry using major and minor axis, asym = 1.78
[Fri Nov  4 11:19:45 2011] Source is asymmetric
[Fri Nov  4 11:52:54 2011] Writing source region out to fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src13_src.reg
[Fri Nov  4 11:52:54 2011] Extracting stamp from image fullrun_ccd3_acisf12241_pi14-548_cl_sm2.00.img.gz, (894, 697) - (1035, 838)
[Fri Nov  4 11:52:54 2011] Writing fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src13.gif
[Fri Nov  4 12:00:17 2011] Size of ../../acisf12241/products/events/fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src13_src.evt.gz[events] = 73 counts
[Fri Nov  4 12:00:17 2011] Mean chipx,y = (715.19, 327.88)
[Fri Nov  4 12:00:17 2011] Mean tdetx,y = (4804.12, 3776.19)
[Fri Nov  4 12:00:17 2011] chipx,y range = (695.00-736.00, 308.00-348.00)
[Fri Nov  4 12:00:17 2011] Size of ../../acisf12241/products/events/fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 132 counts
[Fri Nov  4 12:00:20 2011] Not generating rmf since there are only 62 counts
[Fri Nov  4 12:00:20 2011] arf not found, will run specextract
[Fri Nov  4 12:00:47 2011] ../../acisf12241/products/spectra/fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src13.warf not found
[Fri Nov  4 12:00:47 2011] ../../acisf12241/products/spectra/fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src13.wrmf not found
[Fri Nov  4 12:00:47 2011] Removal of ../../acisf12241/products/spectra/fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src13.soff failed
[Fri Nov  4 12:09:13 2011] Spectrum 13 has only 63 counts, deleting rmf
[Fri Nov  4 12:09:13 2011] 182.744
[Fri Nov  4 12:10:04 2011] Updating aperture counts using extracted products
[Fri Nov  4 12:10:04 2011] Error reading totcts from fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Nov  4 12:10:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov  4 12:10:04 2011] Using photon index=1.80, rate=0.000862, arf fullrun_ccd3_acisf12241_pi14-548_pass1_cl_src13.arf
[Fri Nov  4 12:10:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Nov  4 12:10:04 2011] Updating source flux to 1.1e-14
[Fri Nov  4 12:10:20 2011] Flag p found in src. 13 procflags, skipping spectral fitting
[Fri Nov  4 12:10:20 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting