[Fri Nov  4 07:48:03 2011] Detection parameters:
  Position = (1027.4, 507.2) = 21 6 54.49 -25 36 39.2
  Extent = 2.1" x 1.6", rotation angle = 55 degrees
  Source counts = 10.9 +/- 4.5
  Background counts = 9.1
  Rate = 0.0002 +/- 6e-05

[Fri Nov  4 07:48:03 2011] Off-axis axis estimate = 9.28'
[Fri Nov  4 07:53:30 2011] Using EEF radius (= 3.81 ")to estimate initial spatial extent for simple fitting
[Fri Nov  4 07:53:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov  4 07:53:30 2011] Initial guess for spatial extent in simple fitting = 3.81"
[Fri Nov  4 07:53:30 2011] source mask rpix=7.7, npix_max = 271, mask sum = 272, frac = 1.002
[Fri Nov  4 07:53:30 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 3.81"
[Fri Nov  4 08:25:20 2011] fullrun_ccd0_acisf12241_pi14-548_cl_pass0_src15.ximg exists
[Fri Nov  4 08:25:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12241_pi14-548_cl_pass0_src15.csv
[Fri Nov  4 08:25:20 2011] fullrun_ccd0_acisf12241_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Nov  4 08:25:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12241_pi14-548_cl_pass0_src15.csv
[Fri Nov  4 08:25:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12241_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12241_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov  4 08:25:20 2011] fullrun_ccd0_acisf12241_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Nov  4 08:25:20 2011] fullrun_ccd0_acisf12241_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Nov  4 08:25:20 2011] Fit fullrun_ccd0_acisf12241_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Nov  4 09:40:04 2011] Spatial fit model total counts = 41.331500, observed total counts = 41.000000
[Fri Nov  4 09:40:04 2011] Offset between fit and detection position for source 16 = 0.979076 pixels
[Fri Nov  4 09:40:04 2011] 41.245000 total counts/ 28.804300 bgd. counts: snr = 2.318015
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.979076 pixels
  Position = (1028.1, 507.9) = 21 6 54.48 -25 36 39.1
  Extent = 1.6 (1.0-2.2)", rotation angle = 0
  Source counts = 12.4 +/- 6.4
  Background counts = 28.8
  Rate = 0.0002 +/- 9e-05
[Fri Nov  4 09:40:04 2011] Vigneting correction estimate = 1.000000
[Fri Nov  4 09:40:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov  4 09:40:04 2011] Assessing source extent using major axis lower bound
[Fri Nov  4 09:40:04 2011] Source does appear to be extended
[Fri Nov  4 09:40:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov  4 09:40:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov  4 09:40:29 2011] Initial guess for spatial extent in simple fitting = 1.59"
[Fri Nov  4 09:40:29 2011] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.144
[Fri Nov  4 09:40:29 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 1.59"
[Fri Nov  4 10:14:10 2011] fullrun_ccd0_acisf12241_pi14-548_cl_pass1_src15.ximg exists
[Fri Nov  4 10:14:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12241_pi14-548_cl_pass1_src15.csv
[Fri Nov  4 10:14:10 2011] fullrun_ccd0_acisf12241_pi14-548_cl_pass1_src15_1.ximg exists
[Fri Nov  4 10:14:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12241_pi14-548_cl_pass1_src15.csv
[Fri Nov  4 10:14:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12241_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12241_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov  4 10:14:10 2011] fullrun_ccd0_acisf12241_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri Nov  4 10:14:10 2011] fullrun_ccd0_acisf12241_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Nov  4 10:14:10 2011] Fit fullrun_ccd0_acisf12241_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Nov  4 11:19:38 2011] Warning, spatial fit 15 centroid is now closest to src. 21
[Fri Nov  4 11:19:38 2011] Vigneting correction estimate = 1.000000
[Fri Nov  4 11:19:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov  4 11:19:38 2011] Assessing source extent using major axis lower bound
[Fri Nov  4 11:19:38 2011] Source does appear to be extended
[Fri Nov  4 11:19:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov  4 11:20:04 2011] Writing source region out to fullrun_ccd0_acisf12241_pi14-548_pass1_cl_src16_src.reg
[Fri Nov  4 11:20:04 2011] Extracting stamp from image fullrun_ccd0_acisf12241_pi14-548_cl_sm2.00.img.gz, (955, 435) - (1101, 581)
[Fri Nov  4 11:20:04 2011] Writing fullrun_ccd0_acisf12241_pi14-548_pass1_cl_src16.gif
[Fri Nov  4 11:26:55 2011] Size of ../../acisf12241/products/events/fullrun_ccd0_acisf12241_pi14-548_pass1_cl_src16_src.evt.gz[events] = 19 counts
[Fri Nov  4 11:26:55 2011] Mean chipx,y = (121.63, 502.26)
[Fri Nov  4 11:26:55 2011] Mean tdetx,y = (3563.26, 5010.37)
[Fri Nov  4 11:26:55 2011] chipx,y range = (105.00-142.00, 484.00-519.00)
[Fri Nov  4 11:26:55 2011] Size of ../../acisf12241/products/events/fullrun_ccd0_acisf12241_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 102 counts
[Fri Nov  4 11:26:57 2011] Not generating rmf since there are only 12 counts
[Fri Nov  4 11:26:57 2011] arf not found, will run specextract
[Fri Nov  4 11:27:24 2011] ../../acisf12241/products/spectra/fullrun_ccd0_acisf12241_pi14-548_pass1_cl_src16.warf not found
[Fri Nov  4 11:27:24 2011] ../../acisf12241/products/spectra/fullrun_ccd0_acisf12241_pi14-548_pass1_cl_src16.wrmf not found
[Fri Nov  4 11:27:24 2011] Removal of ../../acisf12241/products/spectra/fullrun_ccd0_acisf12241_pi14-548_pass1_cl_src16.soff failed
[Fri Nov  4 11:28:53 2011] Spectrum 16 has only 12 counts, deleting rmf
[Fri Nov  4 11:28:53 2011] 164.327
[Fri Nov  4 12:10:03 2011] Updating aperture counts using extracted products
[Fri Nov  4 12:10:03 2011] Error reading totcts from fullrun_ccd0_acisf12241_pi14-548_pass1_cl_src16_src.pi.gz
[Fri Nov  4 12:10:03 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov  4 12:10:03 2011] Using photon index=1.80, rate=0.000171, arf fullrun_ccd0_acisf12241_pi14-548_pass1_cl_src16.arf
[Fri Nov  4 12:10:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Nov  4 12:10:03 2011] Updating source flux to 2.4e-15
[Fri Nov  4 12:10:07 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting