[Tue Mar 13 11:00:53 2012] Detection parameters:
  Position = (101.5, 583.4) = 23 18 53.62 -42 14 17.2
  Extent = 0.5" x 0.5", rotation angle = 50 degrees
  Source counts = 59.9 +/- 7.9
  Background counts = 2.1
  Rate = 0.002 +/- 0.0003

[Tue Mar 13 11:00:54 2012] Off-axis axis estimate = 0.61'
[Tue Mar 13 11:01:34 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:01:34 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Mar 13 11:01:34 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.357
[Tue Mar 13 11:01:34 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.39"
[Tue Mar 13 11:01:35 2012] fullrun_ccd3_acisf12240_pi14-548_cl_pass0_src3.ximg exists
[Tue Mar 13 11:01:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12240_pi14-548_cl_pass0_src3.csv
[Tue Mar 13 11:01:35 2012] fullrun_ccd3_acisf12240_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Mar 13 11:01:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12240_pi14-548_cl_pass0_src3.csv
[Tue Mar 13 11:01:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12240_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12240_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:01:35 2012] fullrun_ccd3_acisf12240_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar 13 11:01:35 2012] fullrun_ccd3_acisf12240_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar 13 11:01:35 2012] Fit fullrun_ccd3_acisf12240_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Mar 13 11:01:47 2012] Spatial fit model total counts = 64.935200, observed total counts = 65.000000
[Tue Mar 13 11:01:47 2012] Offset between fit and detection position for source 12 = 0.798284 pixels
[Tue Mar 13 11:01:47 2012] 65.202560 total counts/ 6.748260 bgd. counts: snr = 22.501971
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.798284 pixels
  Position = (102.0, 584.0) = 23 18 53.62 -42 14 17.1
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 58.5 +/- 8.1
  Background counts = 6.7
  Rate = 0.002 +/- 0.0003
[Tue Mar 13 11:01:47 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:01:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:01:47 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:01:47 2012] Source does appear to be extended
[Tue Mar 13 11:01:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:02:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:02:09 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Tue Mar 13 11:02:09 2012] source mask rpix=0.9, npix_max = 8, mask sum = 4, frac = 0.499
[Tue Mar 13 11:02:09 2012] Skipping simple spatial due to low active detector fraction
[Tue Mar 13 11:02:20 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:02:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:02:20 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:02:20 2012] Source does appear to be extended
[Tue Mar 13 11:02:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:05:20 2012] Not overwriting source region fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_src.reg
[Tue Mar 13 11:05:20 2012] Extracting stamp from image fullrun_ccd3_acisf12240_pi14-548_cl_sm2.00.img.gz, (81, 563) - (123, 605)
[Tue Mar 13 11:05:21 2012] Writing fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12.gif
[Tue Mar 13 11:05:30 2012] ../../acisf12240/products/events/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_src.evt and ../../acisf12240/products/events/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Tue Mar 13 11:05:31 2012] Size of ../../acisf12240/products/events/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_src.evt.gz[events] = 60 counts
[Tue Mar 13 11:05:31 2012] Mean chipx,y = (947.82, 949.72)
[Tue Mar 13 11:05:31 2012] Mean tdetx,y = (4182.28, 4008.82)
[Tue Mar 13 11:05:31 2012] chipx,y range = (930.00-964.00, 934.00-969.00)
[Tue Mar 13 11:05:31 2012] Size of ../../acisf12240/products/events/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 8 counts
[Tue Mar 13 11:05:31 2012] ../../acisf12240/products/images/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_src.img and ../../acisf12240/products/images/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Tue Mar 13 11:05:31 2012] ../../acisf12240/products/spectra/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_src.pi and ../../acisf12240/products/spectra/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Tue Mar 13 11:05:31 2012] Not generating rmf since there are only 58 counts
[Tue Mar 13 11:05:34 2012] ../../acisf12240/products/lightcurves/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_src.lc and ../../acisf12240/products/lightcurves/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Tue Mar 13 11:06:47 2012] 202.437
[Tue Mar 13 11:06:51 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:06:51 2012] Error reading totcts from fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_src.pi.gz
[Tue Mar 13 11:06:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:06:51 2012] Using photon index=1.80, rate=0.00197, arf fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12.arf
[Tue Mar 13 11:06:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 11:06:51 2012] Updating source flux to 2.3e-14
[Tue Mar 13 11:07:09 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 13 11:07:10 2012] acisf12240/analysis//spectral/fullrun_ccd3_acisf12240_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete